Fluentd configuration uses 'log' for the log message
while containerd uses 'msg'. Since we can't have a single
JSON format for both, add another log format and make
debug log configurable.
PiperOrigin-RevId: 219729658
Change-Id: I2a6afc4034d893ab90bafc63b394c4fb62b2a7a0
The spec command is analygous to the 'runc spec' command and allows for
the convenient creation of a config.json file for users that don't have
runc handy.
Change-Id: Ifdfec37e023048ea461c32da1a9042a45b37d856
PiperOrigin-RevId: 216907826
This is a breaking change if you're using --debug-log-dir.
The fix is to replace it with --debug-log and add a '/' at
the end:
--debug-log-dir=/tmp/runsc ==> --debug-log=/tmp/runsc/
PiperOrigin-RevId: 216761212
Change-Id: I244270a0a522298c48115719fa08dad55e34ade1
Docker and Containerd both eat the boot processes stderr, making it difficult
to track down panics (which are always written to stderr).
This CL makes the boot process dup its debug log FD to stderr, so that panics
will be captured in the debug log, which is better than nothing.
This is the 3rd try at this CL. Previous attempts were foiled because Docker
expects the 'create' command to pass its stdio directly to the container, so
duping stderr in 'create' caused the applications stderr to go to the log file,
which breaks many applications (including our mysql test).
I added a new image_test that makes sure stdout and stderr are handled
correctly.
PiperOrigin-RevId: 215767328
Change-Id: Icebac5a5dcf39b623b79d7a0e2f968e059130059
Docker and containerd do not expose runsc's stderr, so tracking down sentry
panics can be painful.
If we have a debug log file, we should send panics (and all stderr data) to the
log file.
PiperOrigin-RevId: 215585559
Change-Id: I3844259ed0cd26e26422bcdb40dded302740b8b6
This CL changes the semantics of the "--file-access" flag so that it only
affects the root filesystem. The default remains "exclusive" which is the
common use case, as neither Docker nor K8s supports sharing the root.
Keeping the root fs as "exclusive" means that the fs-intensive work done during
application startup will mostly be cacheable, and thus faster.
Non-root bind mounts will always be shared.
This CL also removes some redundant FSAccessType validations. We validate this
flag in main(), so we can assume it is valid afterwards.
PiperOrigin-RevId: 214359936
Change-Id: I7e75d7bf52dbd7fa834d0aacd4034868314f3b51
It was used before gofer was implemented and it's not
supported anymore.
BREAKING CHANGE: proxy-shared and proxy-exclusive options
are now: shared and exclusive.
PiperOrigin-RevId: 212017643
Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
Docker and containerd do not expose runsc's stderr, so tracking down sentry
panics can be painful.
If we have a debug log file, we should send panics (and all stderr data) to the
log file.
PiperOrigin-RevId: 211992321
Change-Id: I5f0d2f45f35c110a38dab86bafc695aaba42f7a3
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
The specutils.ReadSpecFromFile method was fixed to always seek to the beginning
of the file before reading. This allows Files from the same FD to be read
multiple times, as we do in the boot command when the apply-caps flag is set.
Tested with --network=host.
PiperOrigin-RevId: 211570647
Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
PiperOrigin-RevId: 210995199
Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
This file access type is actually called "proxy-shared", but I forgot to update
all locations.
PiperOrigin-RevId: 208832491
Change-Id: I7848bc4ec2478f86cf2de1dcd1bfb5264c6276de
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
It prints sandbox stacks to the log to help debug stuckness. I expect
that many more options will be added in the future.
PiperOrigin-RevId: 201405931
Change-Id: I87e560800cd5a5a7b210dc25a5661363c8c3a16e
Resume checks the status of the container and unpauses the kernel
if its status is paused. Otherwise nothing happens.
Tests were added to ensure that the process is in the correct state
after various commands.
PiperOrigin-RevId: 201251234
Change-Id: Ifd11b336c33b654fea6238738f864fcf2bf81e19
This is a necessary prerequisite for supporting multiple containers in a single
sandbox.
All the commands (in cmd package) now call operations on Containers (container
package). When a Container first starts, it will create a Sandbox with the same
ID.
The Sandbox class is now simpler, as it only knows how to create boot/gofer
processes, and how to forward commands into the running boot process.
There are TODOs sprinkled around for additional support for multiple
containers. Most notably, we need to detect when a container is intended to run
in an existing sandbox (by reading the metadata), and then have some way to
signal to the sandbox to start a new container. Other urpc calls into the
sandbox need to pass the container ID, so the sandbox can run the operation on
the given container. These are only half-plummed through right now.
PiperOrigin-RevId: 196688269
Change-Id: I1ecf4abbb9dd8987a53ae509df19341aaf42b5b0
Two changes in this CL:
First, make the "boot" process sleep when it encounters an error to give the
controller time to send the error back to the "start" process. Otherwise the
"boot" process exits immediately and the control connection errors with EOF.
Secondly, open the log file with O_APPEND, not O_TRUNC. Docker uses the same
log file for all runtime commands, and setting O_TRUNC causes them to get
destroyed. Furthermore, containerd parses these log files in the event of an
error, and it does not like the file being truncated out from underneath it.
Now, when trying to run a binary that does not exist in the image, the error
message is more reasonable:
$ docker run alpine /not/found
docker: Error response from daemon: OCI runtime start failed: /usr/local/google/docker/runtimes/runscd did not terminate sucessfully: error starting sandbox: error starting application [/not/found]: failed to create init process: no such file or directory
Fixes#32
PiperOrigin-RevId: 196027084
Change-Id: Iabc24c0bdd8fc327237acc051a1655515f445e68
Fabricio Voznika
Ian Gudger
Ian Lewis
Nicolas Lacasse
Justine Olshan
Kevin Krakauer
Lantao Liu
Chanwit Kaewkasi
Googler