Multicast packets are special in that their destination address does not
identify a specific interface. When sending out such a packet the multicast
address is the remote address, but for incoming packets it is the local
address. Hence, when looping a multicast packet, the route needs to be
tweaked to reflect this.
PiperOrigin-RevId: 251739298
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
The linux packet socket can handle GSO packets, so we can segment packets to
64K instead of the MTU which is usually 1500.
Here are numbers for the nginx-1m test:
runsc: 579330.01 [Kbytes/sec] received
runsc-gso: 1794121.66 [Kbytes/sec] received
runc: 2122139.06 [Kbytes/sec] received
and for tcp_benchmark:
$ tcp_benchmark --duration 15 --ideal
[ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal
[ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal --gso 65536
[ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec
PiperOrigin-RevId: 240809103
Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
...in accordance with RFCs 1112 and 2464.
Fixes IPv4 multicast when IP_MULTICAST_IF is specified.
Don't return ErrNoRoute when no route is needed.
Don't set Route.NextHop when no route is needed.
PiperOrigin-RevId: 236199813
Change-Id: I48ed33e1b7f760deaa37e18ad7f1b8b62819ab43
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
Previously, if address resolution for UDP or Ping sockets required sending
packets using Write in Transport layer, Resolve would return ErrWouldBlock
and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution
would run in background. Further calls to Write using same address would also
return ErrNoLinkAddress until resolution has been completed successfully.
Since Write is not allowed to block and System Calls need to be
interruptible in System Call layer, the caller to Write is responsible for
blocking upon return of ErrWouldBlock.
Now, when startAddressResolution is called a notification channel for
the completion of the address resolution is returned.
The channel will traverse up to the calling function of Write as well as
ErrNoLinkAddress. Once address resolution is complete (success or not) the
channel is closed. The caller would call Write again to send packets and
check if address resolution was compeleted successfully or not.
Fixesgoogle/gvisor#5
Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93
PiperOrigin-RevId: 214962200
There is a subtle bug that is the result of two changes made when upstreaming
ICMPv6 support from Fuchsia:
1) ipv6.endpoint.WritePacket writes the local address it was initialized with,
rather than the provided route's local address
2) ipv6.endpoint.handleICMP doesn't set its route's local address to the ICMP
target address before writing the response
The result is that the ICMP response erroneously uses the target ipv6 address
(rather than icmp) as its source address in the response. When trying to debug
this by fixing (2), we ran into problems with bad ipv6 checksums because (1)
didn't respect the local address of the route being passed to it.
This fixes both problems.
PiperOrigin-RevId: 214650822
Change-Id: Ib6148bf432e6428d760ef9da35faef8e4b610d69
Makes it possible to avoid copying or allocating in cases where DeliverNetworkPacket (rx)
needs to turn around and call WritePacket (tx) with its VectorisedView.
Also removes the restriction on having VectorisedViews with multiple views in the write path.
PiperOrigin-RevId: 211728717
Change-Id: Ie03a65ecb4e28bd15ebdb9c69f05eced18fdfcff
This CL does NDP link-address discovery for IPv6.
It includes several small changes necessary to get linux to talk to
this implementation. In particular, a hop limit of 255 is necessary
for ICMPv6.
PiperOrigin-RevId: 211103930
Change-Id: If25370ab84c6b1decfb15de917f3b0020f2c4e0e
We have been unnecessarily creating too many savable types implicitly.
PiperOrigin-RevId: 206334201
Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
Adin Scannell
Chris Kuiper
Michael Pratt
Nicolas Lacasse
Bert Muthalaly
Andrei Vagin
Tamir Duberstein
Ian Gudger
Kevin Krakauer
Googler
Sepehr Raissian
Bhasker Hariharan
Zhaozhong Ni