GO's runtime calls the write system call twice to print "panic:"
and "the reason of this panic", so here is a race window when
other threads can print something to the log and we will see
something like this:
panic: log messages from another thread
The reason of the panic.
This confuses the syzkaller blacklist and dedup detection.
It also makes the logs generally difficult to read. e.g.,
data races often have one side of the race, followed by
a large "diagnosis" dump, finally followed by the other
side of the race.
PiperOrigin-RevId: 297887895
pipe and pipe2 aren't ported, pending a slight rework of pipe FDs for VFS2.
mount and umount2 aren't ported out of temporary laziness. access and faccessat
need additional FSImpl methods to implement properly, but are stubbed to
prevent googletest from CHECK-failing. Other syscalls require additional
plumbing.
Updates #1623
PiperOrigin-RevId: 297188448
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets
will have the same behavior as it is now.
Before the userspace is able to create device, the default loopback device can
be used to test.
/proc/net and /sys/net will still be connected to the root network stack; this
is the same behavior now.
Issue #1833
PiperOrigin-RevId: 296309389
- Added fsbridge package with interface that can be used to open
and read from VFS1 and VFS2 files.
- Converted ELF loader to use fsbridge
- Added VFS2 types to FSContext
- Added vfs.MountNamespace to ThreadGroup
Updates #1623
PiperOrigin-RevId: 295183950
Go 1.14 has a workaround for a Linux 5.2-5.4 bug which requires mlock'ing the g
stack to prevent register corruption. We need to allow this syscall until it is
removed from Go.
PiperOrigin-RevId: 292967478
FD table now holds both VFS1 and VFS2 types and uses the correct
one based on what's set.
Parts of this CL are just initial changes (e.g. sys_read.go,
runsc/main.go) to serve as a template for the remaining changes.
Updates #1487
Updates #1623
PiperOrigin-RevId: 292023223
In general, we've learned that logging must be avoided at all
costs in the hot path. It's unlikely that the optimizations
here were significant in any case, since buffer would certainly
escape.
This also adds a test to ensure that the caller identification
works as expected, and so that logging can be benchmarked.
Original:
BenchmarkGoogleLogging-6 1222255 949 ns/op
With this change:
BenchmarkGoogleLogging-6 517323 2346 ns/op
Fixes#184
PiperOrigin-RevId: 291815420
Because the abi will depend on the core types for marshalling (usermem,
context, safemem, safecopy), these need to be flattened from the sentry
directory. These packages contain no sentry-specific details.
PiperOrigin-RevId: 291811289
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
...enabling us to remove the "CreateNamedLoopbackNIC" variant of
CreateNIC and all the plumbing to connect it through to where the value
is read in FindRoute.
PiperOrigin-RevId: 288713093
When application is not cgroups-aware, it can spawn excessive threads
which often defaults to CPU number.
Introduce a opt-in flag that will set CPU number accordingly to CPU
quota (if available).
Fixes#1391
There are two potential ways of sending a TOS byte with outgoing packets:
including a control message in sendmsg, or setting the IP_TOS/IPV6_TCLASS
socket options (for IPV4 and IPV6 respectively). This change lets hostinet
support the latter.
Fixes#1188
PiperOrigin-RevId: 283550925
This involves allowing getsockopt/setsockopt for the corresponding socket
options, as well as allowing hostinet to process control messages received from
the actual recvmsg syscall.
PiperOrigin-RevId: 282851425
This patch also include a minor change to replace syscall.Dup2
with syscall.Dup3 which was missed in a previous commit(ref a25a976).
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I00beb9cc492e44c762ebaa3750201c63c1f7c2f3
NETLINK_KOBJECT_UEVENT sockets send udev-style messages for device events.
gVisor doesn't have any device events, so our sockets don't need to do anything
once created.
systemd's device manager needs to be able to create one of these sockets. It
also wants to install a BPF filter on the socket. Since we'll never send any
messages, the filter would never be invoked, thus we just fake it out.
Fixes#1117
Updates #1119
PiperOrigin-RevId: 278405893
The watchdog currently can find stuck tasks, but has no way to tell if the
sandbox is stuck before the application starts executing.
This CL adds a startup timeout and action to the watchdog. If Start() is not
called before the given timeout (if non-zero), then the watchdog will take the
action.
PiperOrigin-RevId: 277970577
Right now, we send each tcp packet separately, we call one system
call per-packet. This patch allows to generate multiple tcp packets
and send them by sendmmsg.
The arguable part of this CL is a way how to handle multiple headers.
This CL adds the next field to the Prepandable buffer.
Nginx test results:
Server Software: nginx/1.15.9
Server Hostname: 10.138.0.2
Server Port: 8080
Document Path: /10m.txt
Document Length: 10485760 bytes
w/o gso:
Concurrency Level: 5
Time taken for tests: 5.491 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 18.21 [#/sec] (mean)
Time per request: 274.525 [ms] (mean)
Time per request: 54.905 [ms] (mean, across all concurrent requests)
Transfer rate: 186508.03 [Kbytes/sec] received
sw-gso:
Concurrency Level: 5
Time taken for tests: 3.852 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 25.96 [#/sec] (mean)
Time per request: 192.576 [ms] (mean)
Time per request: 38.515 [ms] (mean, across all concurrent requests)
Transfer rate: 265874.92 [Kbytes/sec] received
w/o gso:
$ ./tcp_benchmark --client --duration 15 --ideal
[SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec
software gso:
$ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso
[SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec
PiperOrigin-RevId: 276112677
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes#1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
Options that do not change mount behavior inside the Sentry are
irrelevant and should not be used when looking for possible
incompatibilities between master and slave mounts.
PiperOrigin-RevId: 273593486
Filter installation has been streamlined and functions renamed.
Documentation has been fixed to be standards compliant, and missing
documentation added. gofmt has also been applied to modified files.
Some processes are reparented to the root container depending
on the kill order and the root container would not reap in time.
So some zombie processes were still present when the test checked.
Fix it by running the second container inside a PID namespace.
PiperOrigin-RevId: 267278591
This used to be the case, but regressed after a recent change.
Also made a few fixes around it and clean up the code a bit.
Closes#720
PiperOrigin-RevId: 265717496
Endpoint protocol goroutines were previously started as part of
loading the endpoint. This is potentially too soon, as resources used
by these goroutine may not have been loaded. Protocol goroutines may
perform meaningful work as soon as they're started (ex: incoming
connect) which can cause them to indirectly access resources that
haven't been loaded yet.
This CL defers resuming all protocol goroutines until the end of
restore.
PiperOrigin-RevId: 262409429
Each gofer now has a goroutine that polls on the FDs used
to communicate with the sandbox. The respective gofer is
destroyed if any of the FDs is closed.
Closes#601
PiperOrigin-RevId: 261383725
We can get the mount namespace from the CreateProcessArgs in all cases where we
need it. This also gets rid of kernel.Destroy method, since the only thing it
was doing was DecRefing the mounts.
Removing the need to call kernel.SetRootMountNamespace also allowed for some
more simplifications in the container fs setup code.
PiperOrigin-RevId: 261357060
syscall.POLL is not supported on arm64, using syscall.PPOLL
to support both the x86 and arm64. refs #63
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164
PiperOrigin-RevId: 260752049
The different containers in a sandbox used only one pid
namespace before. This results in that a container can see
the processes in another container in the same sandbox.
This patch use different pid namespace for different containers.
Signed-off-by: chris.zn <chris.zn@antfin.com>
This keeps all container filesystem completely separate from eachother
(including from the root container filesystem), and allows us to get rid of the
"__runsc_containers__" directory.
It also simplifies container startup/teardown as we don't have to muck around
in the root container's filesystem.
PiperOrigin-RevId: 259613346
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire
package to itself and didn't serve much use (it was freely cast between types,
and served as more of an annoyance than providing any protection.)
Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup
operation, and 10-15 ns per concurrent lookup operation of savings.
This also fixes two tangential usage issues with the FDMap. Namely, non-atomic
use of NewFDFrom and associated calls to Remove (that are both racy and fail to
drop the reference on the underlying file.)
PiperOrigin-RevId: 256285890
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
Currently, the overlay dirCache is only used for a single logical use of
getdents. i.e., it is discard when the FD is closed or seeked back to
the beginning.
But the initial work of getting the directory contents can be quite
expensive (particularly sorting large directories), so we should keep it
as long as possible.
This is very similar to the readdirCache in fs/gofer.
Since the upper filesystem does not have to allow caching readdir
entries, the new CacheReaddir MountSourceOperations method controls this
behavior.
This caching should be trivially movable to all Inodes if desired,
though that adds an additional copy step for non-overlay Inodes.
(Overlay Inodes already do the extra copy).
PiperOrigin-RevId: 255477592
The code was wrongly assuming that only read access was
required from the lower overlay when checking for permissions.
This allowed non-writable files to be writable in the overlay.
Fixes#316
PiperOrigin-RevId: 255263686
When we reopen file by path, we can't be sure that
we will open exactly the same file. The file can be
deleted and another one with the same name can be
created.
PiperOrigin-RevId: 254898594
runsc will now set the HOME environment variable as required by POSIX. The
user's home directory is retrieved from the /etc/passwd file located on the
container's file system during boot.
PiperOrigin-RevId: 253120627
'--rootless' flag lets a non-root user execute 'runsc do'.
The drawback is that the sandbox and gofer processes will
run as root inside a user namespace that is mapped to the
caller's user, intead of nobody. And network is defaulted
to '--network=host' inside the root network namespace. On
the bright side, it's very convenient for testing:
runsc --rootless do ls
runsc --rootless do curl www.google.com
PiperOrigin-RevId: 252840970
Parse annotations containing 'gvisor.dev/spec/mount' that gives
hints about how mounts are shared between containers inside a
pod. This information can be used to better inform how to mount
these volumes inside gVisor. For example, a volume that is shared
between containers inside a pod can be bind mounted inside the
sandbox, instead of being two independent mounts.
For now, this information is used to allow the same tmpfs mounts
to be shared between containers which wasn't possible before.
PiperOrigin-RevId: 252704037
This allows an fdbased endpoint to have multiple underlying fd's from which
packets can be read and dispatched/written to.
This should allow for higher throughput as well as better scalability of the
network stack as number of connections increases.
Updates #231
PiperOrigin-RevId: 251852825
This is required to make the shutdown visible to peers outside the
sandbox.
The readClosed / writeClosed fields were dropped, as they were
preventing a shutdown socket from reading the remainder of queued bytes.
The host syscalls will return the appropriate errors for shutdown.
The control message tests have been split out of socket_unix.cc to make
the (few) remaining tests accessible to testing inherited host UDS,
which don't support sending control messages.
Updates #273
PiperOrigin-RevId: 251763060
No change in functionaly. Added containerMounter object
to keep state while the mounts are processed. This will
help upcoming changes to share mounts per-pod.
PiperOrigin-RevId: 251350096
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes#234
PiperOrigin-RevId: 251349490
Andrei Vagin
moricho
Jamie Liu
gVisor bot
Adin Scannell
Michael Pratt
Fabricio Voznika
Ian Gudger
Bert Muthalaly
Aleksandr Razumov
Aleksandr Razumov
Bhasker Hariharan
Dean Deng
Haibo Xu
Nicolas Lacasse
kevin.xu
Kevin Krakauer
Robert Tonic
praveensastry
Tamir Duberstein
Rahat Mahmood
chris.zn
Ian Lewis
Josh Gao