Maximum filename length is filesystem-dependent, and obtained via
statfs::f_namelen. This limit is usually 255 bytes (NAME_MAX), but not
always. For example, VFAT supports filenames of up to 255... UCS-2
characters, which Linux conservatively takes to mean UTF-8-encoded
bytes: fs/fat/inode.c:fat_statfs(), FAT_LFN_LEN * NLS_MAX_CHARSET_SIZE.
As a result, Linux's VFS does not enforce NAME_MAX:
$ rg --maxdepth=1 '\WNAME_MAX\W' fs/ include/linux/
fs/libfs.c
38: buf->f_namelen = NAME_MAX;
64: if (dentry->d_name.len > NAME_MAX)
include/linux/relay.h
74: char base_filename[NAME_MAX]; /* saved base filename */
include/linux/fscrypt.h
149: * filenames up to NAME_MAX bytes, since base64 encoding expands the length.
include/linux/exportfs.h
176: * understanding that it is already pointing to a a %NAME_MAX+1 sized
Remove this check from core VFS, and add it to ramfs (and by extension
tmpfs), where it is actually applicable:
mm/shmem.c:shmem_dir_inode_operations.lookup == simple_lookup *does*
enforce NAME_MAX.
PiperOrigin-RevId: 245324748
Change-Id: I17567c4324bfd60e31746a5270096e75db963fac
This CL fixes the following bugs:
- Uses atomic to set/read status instead of binary.LittleEndian.PutUint32 etc
which are not atomic.
- Increments ringOffsets for frames that are truncated (i.e status is
tpStatusCopy)
- Does not ignore frames with tpStatusLost bit set as they are valid frames and
only indicate that there some frames were lost before this one and metrics can
be retrieved with a getsockopt call.
- Adds checks to make sure blockSize is a multiple of page size. This is
required as the kernel allocates in pages per block and rejects sizes that are
not page aligned with an EINVAL.
Updates #210
PiperOrigin-RevId: 244959464
Change-Id: I5d61337b7e4c0f8a3063dcfc07791d4c4521ba1f
p9.messageByType was taking 7% of p9.recv before, spending time
with reflection and map lookup. Now it's reduced to 1%.
PiperOrigin-RevId: 244947313
Change-Id: I42813f920557b7656f8b29157eb32acd79e11fa5
os.NewFile() accounts for 38% of CPU time in localFile.Walk().
This change switchs to use fd.FD which is much cheaper to create.
Now, fd.New() in localFile.Walk() accounts for only 4%.
PiperOrigin-RevId: 244944983
Change-Id: Ic892df96cf2633e78ad379227a213cb93ee0ca46
For a symbol link to some directory, eg.
`/tmp/symlink -> /tmp/dir`
`fstatat("/tmp/symlink")` should return symbol link data, but
`fstatat("/tmp/symlink/")` (symlink with trailing slash) should return
directory data it points following linux behaviour.
Currently fstatat() a symlink with trailing slash will get "not a
directory" error which is wrong.
Signed-off-by: Wei Zhang <zhangwei198900@gmail.com>
Change-Id: I63469b1fb89d083d1c1255d32d52864606fbd7e2
PiperOrigin-RevId: 244783916
Support shutdown on only the read side of an endpoint. Reads performed
after a call to Shutdown with only the ShutdownRead flag will return
ErrClosedForReceive without data.
Break out the shutdown(2) with SHUT_RD syscall test into to two tests.
The first tests that no packets are sent when shutting down the read
side of a socket. The second tests that, after shutting down the read
side of a socket, unread data can still be read, or an EOF if there is
no more data to read.
Change-Id: I9d7c0a06937909cbb466b7591544a4bcaebb11ce
PiperOrigin-RevId: 244459430
The MSG_TRUNC flag is set in the msghdr when a message is truncated.
Fixesgoogle/gvisor#200
PiperOrigin-RevId: 244440486
Change-Id: I03c7d5e7f5935c0c6b8d69b012db1780ac5b8456
Only emit unimplemented syscall events for setting SO_OOBINLINE and SO_LINGER
when attempting to set unsupported values.
PiperOrigin-RevId: 244229675
Change-Id: Icc4562af8f733dd75a90404621711f01a32a9fc1
It is possible to create a listening socket which will accept
IPv4 and IPv6 connections. In this case, we set IPv6ProtocolNumber
for all accepted endpoints, even if they handle IPv4 connections.
This means that we can't use endpoint.netProto to set gso.L3HdrLen.
PiperOrigin-RevId: 244227948
Change-Id: I5e1863596cb9f3d216febacdb7dc75651882eef1
The existing logic attempting to do this is incorrect. Unary ^ has
higher precedence than &^, so mask always has UnblockableSignals
cleared, allowing dequeueSignalLocked to dequeue unblockable signals
(which allows userspace to ignore them).
Switch the logic so that unblockable signals are always masked.
PiperOrigin-RevId: 244058487
Change-Id: Ib19630ac04068a1fbfb9dc4a8eab1ccbdb21edc3
FD limit and file size limit is read from the host, instead
of using hard-coded defaults, given that they effect the sandbox
process. Also limit the direct cache to use no more than half
if the available FDs.
PiperOrigin-RevId: 244050323
Change-Id: I787ad0fdf07c49d589e51aebfeae477324fe26e6
Current, doPoll copies the user struct pollfd array into a
[]syscalls.PollFD, which contains internal kdefs.FD and
waiter.EventMask types. While these are currently binary-compatible with
the Linux versions, we generally discourage copying directly to internal
types (someone may inadvertantly change kdefs.FD to uint64).
Instead, copy directly to a []linux.PollFD, which will certainly be
binary compatible. Most of syscalls/polling.go is included directly into
syscalls/linux/sys_poll.go, as it can then operate directly on
linux.PollFD. The additional syscalls.PollFD type is providing little
value.
I've also added explicit conversion functions for waiter.EventMask,
which creates the possibility of a different binary format.
PiperOrigin-RevId: 244042947
Change-Id: I24e5b642002a32b3afb95a9dcb80d4acd1288abf
Normal files display their path in the current mount namespace:
I0410 10:57:54.964196 216336 x:0] [ 1] ls X read(0x3 /proc/filesystems, 0x55cee3bdb2c0 "nodev\t9p\nnodev\tdevpts \nnodev\tdevtmpfs\nnodev\tproc\nnodev\tramdiskfs\nnodev\tsysfs\nnodev\ttmpfs\n", 0x1000) = 0x58 (24.462?s)
AT_FDCWD includes the CWD:
I0411 12:58:48.278427 1526 x:0] [ 1] stat_test E newfstatat(AT_FDCWD /home/prattmic, 0x55ea719b564e /proc/self, 0x7ef5cefc2be8, 0x0)
Sockets (and other non-vfs files) display an inode number (like
/proc/PID/fd):
I0410 10:54:38.909123 207684 x:0] [ 1] nc E bind(0x3 socket:[1], 0x55b5a1652040 {Family: AF_INET, Addr: , Port: 8080}, 0x10)
I also fixed a few syscall args that should be Path.
PiperOrigin-RevId: 243169025
Change-Id: Ic7dda6a82ae27062fe2a4a371557acfd6a21fa2a
RootFromContext can return a dirent with reference taken, or nil. We must call
DecRef if (and only if) a real dirent is returned.
PiperOrigin-RevId: 242965515
Change-Id: Ie2b7b4cb19ee09b6ccf788b71f3fd7efcdf35a11
DirentCache is already a savable type, and it ensures that it is empty at the
point of Save. There is no reason not to save it along with the MountSource.
This did uncover an issue where not all MountSources were properly flushed
before Save. If a mount point has an open file and is then unmounted, we save
the MountSource without flushing it first. This CL also fixes that by flushing
all MountSources for all open FDs on Save.
PiperOrigin-RevId: 242906637
Change-Id: I3acd9d52b6ce6b8c989f835a408016cb3e67018f
From sendfile spec and also the linux kernel code, we should
limit the count arg to 'MAX_RW_COUNT'. This patch export
'MAX_RW_COUNT' in kernel pkg and use it in the implementation
of sendfile syscall.
Signed-off-by: Li Qiang <pangpei.lq@antfin.com>
Change-Id: I1086fec0685587116984555abd22b07ac233fbd2
PiperOrigin-RevId: 242745831
We construct a ramfs tree of "scaffolding" directories for all mount points, so
that a directory exists that each mount point can be mounted over.
We were creating these directories without write permissions, which meant that
they were not wribable even when underlayed under a writable filesystem. They
should be writable.
PiperOrigin-RevId: 242507789
Change-Id: I86645e35417560d862442ff5962da211dbe9b731
Strings are a better fit for this usage because they are immutable in Go, and
can contain arbitrary bytes. It also allows us to avoid casting bytes to string
(and the associated allocation) in the hot path when checking for overlay
whiteouts.
PiperOrigin-RevId: 242208856
Change-Id: I7699ae6302492eca71787dd0b72e0a5a217a3db2
From the SDM: "The least-significant byte in register EAX (register AL)
will always return 01H. Software should ignore this value and not
interpret it as an informational descriptor."
Unfortunately, online docs [1] [2] (likely based on an old version of the SDM)
say: "The least-significant byte in register EAX (register AL) indicates
the number of times the CPUID instruction must be executed with an input
value of 2 to get a complete description of the processor's caches and
TLBs."
dlang uses this second interpretation [3] and will loop 2^32 times if we
return zero. Fix this by specifying the fixed value of one. We still
don't support exposing the actual cache information, leaving all other
bytes empty. A zero byte means: "Null descriptor, this byte contains no
information."
[1] http://www.sandpile.org/x86/cpuid.htm#level_0000_0002h
[2] https://c9x.me/x86/html/file_module_x86_id_45.html
[3] 424640864c/src/core/cpuid.d (L533-L534)
PiperOrigin-RevId: 242046629
Change-Id: Ic0f0a5f974b20f71391cb85645bdcd4003e5fe88
In particular, ns.IDOfTask and tg.ID are used for gettid and getpid,
respectively, where removing defer saves ~100ns. This may be a small
improvement to application logging, which may call gettid/getpid
frequently.
PiperOrigin-RevId: 242039616
Change-Id: I860beb62db3fe077519835e6bafa7c74cba6ca80
This will save copies when preemption is not caused by a CPU migration.
PiperOrigin-RevId: 241844399
Change-Id: I2ba3b64aa377846ab763425bd59b61158f576851
Dirent.exists() is called in Create to check whether a child with the given
name already exists.
Dirent.exists() calls walk(), and before this CL allowed walk() to drop d.mu
while calling d.Inode.Lookup. During this existence check, a racing Rename()
can acquire d.mu and create a new child of the dirent with the same name.
(Note that the source and destination of the rename must be in the same
directory, otherwise renameMu will be taken preventing the race.) In this
case, d.exists() can return false, even though a child with the same name
actually does exist.
This CL changes d.exists() so that it does not release d.mu while walking, thus
preventing the race with Rename.
It also adds comments noting that lockForRename may not take renameMu if the
source and destination are in the same directory, as this is a bit surprising
(at least it was to me).
PiperOrigin-RevId: 241842579
Change-Id: I56524870e39dfcd18cab82054eb3088846c34813
If there are thousands of threads, ThreadGroupsAppend becomes very
expensive as it must iterate over all Tasks to find the ThreadGroup
leaders.
Reduce the cost by maintaining a map of ThreadGroups which can be used
to grab them all directly.
The one somewhat visible change is to convert PID namespace init
children zapping to a group-directed SIGKILL, as Linux did in
82058d668465 "signal: Use group_send_sig_info to kill all processes in a
pid namespace".
In a benchmark that creates N threads which sleep for two minutes, we
see approximately this much CPU time in ThreadGroupsAppend:
Before:
1 thread: 0ms
1024 threads: 30ms - 9130ms
4096 threads: 50ms - 2000ms
8192 threads: 18160ms
16384 threads: 17210ms
After:
1 thread: 0ms
1024 threads: 0ms
4096 threads: 0ms
8192 threads: 0ms
16384 threads: 0ms
The profiling is actually extremely noisy (likely due to cache effects),
as some runs show almost no samples at 1024, 4096 threads, but obviously
this does not scale to lots of threads.
PiperOrigin-RevId: 241828039
Change-Id: I17827c90045df4b3c49b3174f3a05bca3026a72c
The previous implementation revolved around runes instead of bytes, which caused
weird behavior when converting between the two. For example, peekRune would read
the byte 0xff from a buffer, convert it to a rune, then return it. As rune is an
alias of int32, 0xff was 0-padded to int32(255), which is the hex code point for
?. However, peekRune also returned the length of the byte (1). When calling
utf8.EncodeRune, we only allocated 1 byte, but tried the write the 2-byte
character ?.
tl;dr: I apparently didn't understand runes when I wrote this.
PiperOrigin-RevId: 241789081
Change-Id: I14c788af4d9754973137801500ef6af7ab8a8727
Also makes the safemem reading and writing inline, as it makes it easier to see
what locks are held.
PiperOrigin-RevId: 241775201
Change-Id: Ib1072f246773ef2d08b5b9a042eb7e9e0284175c
Added syscall annotations for unimplemented syscalls for later generation into
reference docs. Annotations are of the form:
@Syscall(<name>, <key:value>, ...)
Supported args and values are:
- arg: A syscall option. This entry only applies to the syscall when given this
option.
- support: Indicates support level
- UNIMPLEMENTED: Unimplemented (implies returns:ENOSYS)
- PARTIAL: Partial support. Details should be provided in note.
- FULL: Full support
- returns: Indicates a known return value. Values are
syscall errors. This is treated as a string so you can use something
like "returns:EPERM or ENOSYS".
- issue: A Github issue number.
- note: A note
Example:
// @Syscall(mmap, arg:MAP_PRIVATE, support:FULL, note:Private memory fully supported)
// @Syscall(mmap, arg:MAP_SHARED, support:UNIMPLEMENTED, issue:123, note:Shared memory not supported)
// @Syscall(setxattr, returns:ENOTSUP, note:Requires file system support)
Annotations should be placed as close to their implementation as possible
(preferrably as part of a supporting function's Godoc) and should be updated as
syscall support changes.
PiperOrigin-RevId: 241697482
Change-Id: I7a846135db124e1271dc5057d788cba82ca312d4
Also remove comments in InodeOperations that required that implementation of
some Create* operations ensure that the name does not already exist, since
these checks are all centralized in the Dirent.
PiperOrigin-RevId: 241637335
Change-Id: Id098dc6063ff7c38347af29d1369075ad1e89a58
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
Kevin Krakauer
Michael Pratt
Jamie Liu
Bhasker Hariharan
Fabricio Voznika
Wei Zhang
Ben Burkert
Ian Gudger
Andrei Vagin
Googler
Nicolas Lacasse
Yong He
Shiva Prasanth
Li Qiang
Tamir Duberstein
Adin Scannell
Ian Lewis
Rahat Mahmood