This CL also cleans up the error returned for setting congestion
control which was incorrectly returning EINVAL instead of ENOENT.
PiperOrigin-RevId: 252889093
For sendfile(2), we propagate a TCP error through the system call layer.
This should be eaten if there is a partial result. This change also adds
a test to ensure that there is no panic in this case, for both TCP sockets
and unix domain sockets.
PiperOrigin-RevId: 252746192
Changes netstack to confirm to current linux behaviour where if the backlog is
full then we drop the SYN and do not send a SYN-ACK. Similarly we allow upto
backlog connections to be in SYN-RCVD state as long as the backlog is not full.
We also now drop a SYN if syn cookies are in use and the backlog for the
listening endpoint is full.
Added new tests to confirm the behaviour.
Also reverted the change to increase the backlog in TcpPortReuseMultiThread
syscall test.
Fixes#236
PiperOrigin-RevId: 252500462
We still only advertise a single NUMA node, and ignore mempolicy
accordingly, but mbind() at least now succeeds and has effects reflected
by get_mempolicy().
Also fix handling of nodemasks: round sizes to unsigned long (as
documented and done by Linux), and zero trailing bits when copying them
out.
PiperOrigin-RevId: 251950859
This is necessary for implementing network diagnostic interfaces like
/proc/net/{tcp,udp,unix} and sock_diag(7).
For pass-through endpoints such as hostinet, we obtain the socket
state from the backend. For netstack, we add explicit tracking of TCP
states.
PiperOrigin-RevId: 251934850
This is required to make the shutdown visible to peers outside the
sandbox.
The readClosed / writeClosed fields were dropped, as they were
preventing a shutdown socket from reading the remainder of queued bytes.
The host syscalls will return the appropriate errors for shutdown.
The control message tests have been split out of socket_unix.cc to make
the (few) remaining tests accessible to testing inherited host UDS,
which don't support sending control messages.
Updates #273
PiperOrigin-RevId: 251763060
Multicast packets are special in that their destination address does not
identify a specific interface. When sending out such a packet the multicast
address is the remote address, but for incoming packets it is the local
address. Hence, when looping a multicast packet, the route needs to be
tweaked to reflect this.
PiperOrigin-RevId: 251739298
We don't actually support core dumps, but some applications want to
get/set dumpability, which still has an effect in procfs.
Lack of support for set-uid binaries or fs creds simplifies things a
bit.
As-is, processes started via CreateProcess (i.e., init and sentryctl
exec) have normal dumpability. I'm a bit torn on whether sentryctl exec
tasks should be dumpable, but at least since they have no parent normal
UID/GID checks should protect them.
PiperOrigin-RevId: 251712714
VmData is the size of private data segments.
It has the same meaning as in Linux.
Change-Id: Iebf1ae85940a810524a6cde9c2e767d4233ddb2a
PiperOrigin-RevId: 250593739
After bf959931ddb88c4e4366e96dd22e68fa0db9527c ("wait/ptrace: assume
__WALL if the child is traced") (Linux 4.7), tracees are always eligible
for waiting, regardless of type.
PiperOrigin-RevId: 250399527
The previous commit adds WNOTHREAD support to waitid, so we may as well
complete the upstream change.
Linux added WCLONE, WALL, WNOTHREAD support to waitid(2) in
91c4e8ea8f05916df0c8a6f383508ac7c9e10dba ("wait: allow sys_waitid() to
accept __WNOTHREAD/__WCLONE/__WALL"). i.e., Linux 4.7.
PiperOrigin-RevId: 249560587
Change-Id: Iff177b0848a3f7bae6cb5592e44500c5a942fbeb
Pipe internals are made more efficient by avoiding garbage collection.
A pool is now used that can be shared by all pipes, and buffers are
chained via an intrusive list. The documentation for pipe structures
and methods is also simplified and clarified.
The pipe tests are now parameterized, so that they are run on all
different variants (named pipes, small buffers, default buffers).
The pipe buffer sizes are exposed by fcntl, which is now supported
by this change. A size change test has been added to the suite.
These new tests uncovered a bug regarding the semantics of open
named pipes with O_NONBLOCK, which is also fixed by this CL. This
fix also addresses the lack of the O_LARGEFILE flag for named pipes.
PiperOrigin-RevId: 249375888
Change-Id: I48e61e9c868aedb0cadda2dff33f09a560dee773
* A segment with filesz == 0, memsz > 0 should be an anonymous only
mapping. We were failing to load such an ELF.
* Anonymous pages are always mapped RW, regardless of the segment
protections.
PiperOrigin-RevId: 249355239
Change-Id: I251e5c0ce8848cf8420c3aadf337b0d77b1ad991
This does not actually implement an efficient splice or sendfile. Rather, it
adds a generic plumbing to the file internals so that this can be added. All
file implementations use the stub fileutil.NoSplice implementation, which
causes sendfile and splice to fall back to an internal copy.
A basic splice system call interface is added, along with a test.
PiperOrigin-RevId: 249335960
Change-Id: Ic5568be2af0a505c19e7aec66d5af2480ab0939b
* Creation of files, directories (and other fs objects) in a directory
should always update ctime.
* Same for removal.
* atime should not be updated on lookup, only readdir.
I've also renamed some misleading functions that update mtime and ctime.
PiperOrigin-RevId: 249115063
Change-Id: I30fa275fa7db96d01aa759ed64628c18bb3a7dc7
There is a lot of redundancy that we can simplify in the stat_times
test. This will make it easier to add new tests. However, the
simplification reveals that cached uattrs on goferfs don't properly
update ctime on rename.
PiperOrigin-RevId: 248773425
Change-Id: I52662728e1e9920981555881f9a85f9ce04041cf
The issue with duplicate /proc/sys entries seems to have been fixed in:
PiperOrigin-RevId 229305982
Git hash dc8450b567Fixesgoogle/gvisor#125
PiperOrigin-RevId: 248571903
Change-Id: I76ff3b525c93dafb92da6e5cf56e440187f14579
Some behavior was broken due to the difficulty of running automated raw
socket tests.
Change-Id: I152ca53916bb24a0208f2dc1c4f5bc87f4724ff6
PiperOrigin-RevId: 246747067
bazel has a lot of dependencies and users don't want to install them
just to build gvisor.
These changes allows to run bazel in a docker container.
A bazel cache is on the local file system (~/.cache/bazel), so
incremental builds should be fast event after recreating a bazel
container.
Here is an example how to build runsc:
make BAZEL_OPTIONS="build runsc:runsc" bazel
Change-Id: I8c0a6d0c30e835892377fb6dd5f4af7a0052d12a
PiperOrigin-RevId: 246570877
The test also times out when GCE machine has 2 CPUs. I cannot
repro it locally with a 2 CPU cgroup though. Let's skip the
test when there are 2 CPUs to stop the flakiness and retest it
once the fix is available.
PiperOrigin-RevId: 246523363
Change-Id: I9d9d922a5be3aa7bc91dff5a1807ca99f3f4a4f9
Fixed a small logic error that broke proper accounting of MultiPortEndpoints.
PiperOrigin-RevId: 246502126
Change-Id: I1a7d6ea134f811612e545676212899a3707bc2c2
This requires two changes:
1) Support for more than one socket to join a given multicast group.
2) Duplicate delivery of incoming multicast packets to all sockets listening
for it.
In addition, I tweaked the code (and added a test) to disallow duplicates
IP_ADD_MEMBERSHIP calls for the same group and NIC. This is how Linux does
it.
PiperOrigin-RevId: 246437315
Change-Id: Icad8300b4a8c3f501d9b4cd283bd3beabef88b72
Test times out when it runs on a single core. Skip until the
bug in the Go runtime is fixed.
PiperOrigin-RevId: 245866466
Change-Id: Ic3e72131c27136d58b71f6b11acc78abf55895d4
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
Previously, createAt was eating all errors from FindInode except for EACCES and
proceeding with the creation. This is incorrect, as FindInode can return many
other errors (like ENAMETOOLONG) that should stop creation.
This CL changes createAt to return all errors encountered except for ENOENT,
which we can ignore because we are about to create the thing.
PiperOrigin-RevId: 245773222
Change-Id: I1b317021de70f0550fb865506f6d8147d4aebc56
Maximum filename length is filesystem-dependent, and obtained via
statfs::f_namelen. This limit is usually 255 bytes (NAME_MAX), but not
always. For example, VFAT supports filenames of up to 255... UCS-2
characters, which Linux conservatively takes to mean UTF-8-encoded
bytes: fs/fat/inode.c:fat_statfs(), FAT_LFN_LEN * NLS_MAX_CHARSET_SIZE.
As a result, Linux's VFS does not enforce NAME_MAX:
$ rg --maxdepth=1 '\WNAME_MAX\W' fs/ include/linux/
fs/libfs.c
38: buf->f_namelen = NAME_MAX;
64: if (dentry->d_name.len > NAME_MAX)
include/linux/relay.h
74: char base_filename[NAME_MAX]; /* saved base filename */
include/linux/fscrypt.h
149: * filenames up to NAME_MAX bytes, since base64 encoding expands the length.
include/linux/exportfs.h
176: * understanding that it is already pointing to a a %NAME_MAX+1 sized
Remove this check from core VFS, and add it to ramfs (and by extension
tmpfs), where it is actually applicable:
mm/shmem.c:shmem_dir_inode_operations.lookup == simple_lookup *does*
enforce NAME_MAX.
PiperOrigin-RevId: 245324748
Change-Id: I17567c4324bfd60e31746a5270096e75db963fac
TCP tests and the implementation will come in followup CLs.
Updates google/gvisor#206
Updates google/gvisor#207
PiperOrigin-RevId: 245121470
Change-Id: Ib50b62724d3ba0cbfb1374e1f908798431ee2b21
For a symbol link to some directory, eg.
`/tmp/symlink -> /tmp/dir`
`fstatat("/tmp/symlink")` should return symbol link data, but
`fstatat("/tmp/symlink/")` (symlink with trailing slash) should return
directory data it points following linux behaviour.
Currently fstatat() a symlink with trailing slash will get "not a
directory" error which is wrong.
Signed-off-by: Wei Zhang <zhangwei198900@gmail.com>
Change-Id: I63469b1fb89d083d1c1255d32d52864606fbd7e2
PiperOrigin-RevId: 244783916
Support shutdown on only the read side of an endpoint. Reads performed
after a call to Shutdown with only the ShutdownRead flag will return
ErrClosedForReceive without data.
Break out the shutdown(2) with SHUT_RD syscall test into to two tests.
The first tests that no packets are sent when shutting down the read
side of a socket. The second tests that, after shutting down the read
side of a socket, unread data can still be read, or an EOF if there is
no more data to read.
Change-Id: I9d7c0a06937909cbb466b7591544a4bcaebb11ce
PiperOrigin-RevId: 244459430
The MSG_TRUNC flag is set in the msghdr when a message is truncated.
Fixesgoogle/gvisor#200
PiperOrigin-RevId: 244440486
Change-Id: I03c7d5e7f5935c0c6b8d69b012db1780ac5b8456
Inode ids are only guaranteed to be stable across save/restore if the file is
held open. This CL fixes a simple stat test to allow it to compare symlink and
target by inode id, as long as the link target is held open.
PiperOrigin-RevId: 244238343
Change-Id: I74c5115915b1cc032a4c16515a056a480f218f00
The existing logic attempting to do this is incorrect. Unary ^ has
higher precedence than &^, so mask always has UnblockableSignals
cleared, allowing dequeueSignalLocked to dequeue unblockable signals
(which allows userspace to ignore them).
Switch the logic so that unblockable signals are always masked.
PiperOrigin-RevId: 244058487
Change-Id: Ib19630ac04068a1fbfb9dc4a8eab1ccbdb21edc3
FD limit and file size limit is read from the host, instead
of using hard-coded defaults, given that they effect the sandbox
process. Also limit the direct cache to use no more than half
if the available FDs.
PiperOrigin-RevId: 244050323
Change-Id: I787ad0fdf07c49d589e51aebfeae477324fe26e6
Even superuser cannot raise RLIMIT_NOFILE above /proc/sys/fs/nr_open, so
start the test by lowering the limits before raising.
Change-Id: Ied6021c64178a6cb9098088a1a3384db523a226f
PiperOrigin-RevId: 242965249
From a recent test failure:
"State:\tD (disk sleep)\n"
"disk sleep" does not match \w+. We need to allow spaces.
PiperOrigin-RevId: 242762469
Change-Id: Ic8d05a16669412a72c1e76b498373e5b22fe64c4
The previous implementation revolved around runes instead of bytes, which caused
weird behavior when converting between the two. For example, peekRune would read
the byte 0xff from a buffer, convert it to a rune, then return it. As rune is an
alias of int32, 0xff was 0-padded to int32(255), which is the hex code point for
?. However, peekRune also returned the length of the byte (1). When calling
utf8.EncodeRune, we only allocated 1 byte, but tried the write the 2-byte
character ?.
tl;dr: I apparently didn't understand runes when I wrote this.
PiperOrigin-RevId: 241789081
Change-Id: I14c788af4d9754973137801500ef6af7ab8a8727
Also remove comments in InodeOperations that required that implementation of
some Create* operations ensure that the name does not already exist, since
these checks are all centralized in the Dirent.
PiperOrigin-RevId: 241637335
Change-Id: Id098dc6063ff7c38347af29d1369075ad1e89a58
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
We weren't saving simple devices' last allocated inode numbers, which
caused inode number reuse across S/R.
PiperOrigin-RevId: 241414245
Change-Id: I964289978841ef0a57d2fa48daf8eab7633c1284
This reveals a bug in the tests that require CAP_SET{UID,GID}: After the
child process enters the new user namespace, it ceases to have the
relevant capability in the parent user namespace, so the privileged
write must be done by the parent process. Change tests accordingly.
PiperOrigin-RevId: 241412765
Change-Id: I587c1f24aa6f2180fb2e5e5c0162691ba5bac1bc
- Make the body of InForkedProcess async-signal-safe.
- Pass the correct path to open().
PiperOrigin-RevId: 241348774
Change-Id: I753dfa36e4fb05521e659c173e3b7db0c7fc159b
When fork a child process, the name filed of TaskContext is not set.
It results in that when we cat /proc/{pid}/status, the name filed is
null.
Like this:
Name:
State: S (sleeping)
Tgid: 28
Pid: 28
PPid: 26
TracerPid: 0
FDSize: 8
VmSize: 89712 kB
VmRSS: 6648 kB
Threads: 1
CapInh: 00000000a93d35fb
CapPrm: 0000000000000000
CapEff: 0000000000000000
CapBnd: 00000000a93d35fb
Seccomp: 0
Change-Id: I5d469098c37cedd19da16b7ffab2e546a28a321e
PiperOrigin-RevId: 240893304
- Document fsutil.CachedFileObject.FD() requirements on access
permissions, and change gofer.inodeFileState.FD() to honor them.
Fixes#147.
- Combine gofer.inodeFileState.readonly and
gofer.inodeFileState.readthrough, and simplify handle caching logic.
- Inline gofer.cachePolicy.cacheHandles into
gofer.inodeFileState.setSharedHandles, because users with access to
gofer.inodeFileState don't necessarily have access to the fs.Inode
(predictably, this is a save/restore problem).
Before this CL:
$ docker run --runtime=runsc-d -v $(pwd)/gvisor/repro:/root/repro -it ubuntu bash
root@34d51017ed67:/# /root/repro/runsc-b147
mmap: 0x7f3c01e45000
Segmentation fault
After this CL:
$ docker run --runtime=runsc-d -v $(pwd)/gvisor/repro:/root/repro -it ubuntu bash
root@d3c3cb56bbf9:/# /root/repro/runsc-b147
mmap: 0x7f78987ec000
o
PiperOrigin-RevId: 240818413
Change-Id: I49e1d4a81a0cb9177832b0a9f31a10da722a896b
The start time is the number of clock ticks between the boot time and
application start time.
PiperOrigin-RevId: 240619475
Change-Id: Ic8bd7a73e36627ed563988864b0c551c052492a5
Memfds are simply anonymous tmpfs files with no associated
mounts. Also implementing file seals, which Linux only implements for
memfds at the moment.
PiperOrigin-RevId: 240450031
Change-Id: I31de78b950101ae8d7a13d0e93fe52d98ea06f2f
.net sets these flags to -1 and then uses their result, especting it to be
zero.
Does not set actual flags (e.g. MSG_TRUNC), but setting to zero is more correct
than what we did before.
PiperOrigin-RevId: 239657951
Change-Id: I89c5f84bc9b94a2cd8ff84e8ecfea09e01142030
In the case of a rename replacing an existing destination inode, ramfs
Rename failed to first remove the replaced inode. This caused:
1. A leak of a reference to the inode (making it live indefinitely).
2. For directories, a leak of the replaced directory's .. link to the
parent. This would cause the parent's link count to incorrectly
increase.
(2) is much simpler to test than (1), so that's what I've done.
agentfs has a similar bug with link count only, so the Dirent layer
informs the Inode if this is a replacing rename.
Fixes#133
PiperOrigin-RevId: 239105698
Change-Id: I4450af2462d8ae3339def812287213d2cbeebde0
getsockopt(IP_MULTICAST_IF) only supports struct in_addr.
Also adds support for setsockopt(IP_MULTICAST_IF) with struct in_addr.
PiperOrigin-RevId: 237620230
Change-Id: I75e7b5b3e08972164eb1906f43ddd67aedffc27c
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
* open_create_test_runsc_ptrace_shared doesn't expect the write access to /
* exec_test_runsc_ptrace_shared could not find /usr/share/zoneinfo/
* clock_gettime_test_runsc_ptrace_shared didn't expect that
a thread cpu time can be zero.
* affinity_test_runsc_ptrace_shared expected minimum 3 cpus
PiperOrigin-RevId: 237509429
Change-Id: I477937e5d2cdf3f8720836bfa972abd35d8220a3
Now that tests aren't running in parallel, this test occassionally
takes too long and times out.
PiperOrigin-RevId: 237106971
Change-Id: I195a4b77315c9f5511c9e8ffadddb7aaa78beafd
Rahat Mahmood
Adin Scannell
Bhasker Hariharan
Andrei Vagin
Jamie Liu
Fabricio Voznika
Googler
Michael Pratt
Chris Kuiper
Ian Gudger
chris.zn
Tamir Duberstein
Kevin Krakauer
Nicolas Lacasse
Wei Zhang
Ben Burkert
Shiva Prasanth
chris.zn