runsc will now set the HOME environment variable as required by POSIX. The
user's home directory is retrieved from the /etc/passwd file located on the
container's file system during boot.
PiperOrigin-RevId: 253120627
Parse annotations containing 'gvisor.dev/spec/mount' that gives
hints about how mounts are shared between containers inside a
pod. This information can be used to better inform how to mount
these volumes inside gVisor. For example, a volume that is shared
between containers inside a pod can be bind mounted inside the
sandbox, instead of being two independent mounts.
For now, this information is used to allow the same tmpfs mounts
to be shared between containers which wasn't possible before.
PiperOrigin-RevId: 252704037
No change in functionaly. Added containerMounter object
to keep state while the mounts are processed. This will
help upcoming changes to share mounts per-pod.
PiperOrigin-RevId: 251350096
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes#234
PiperOrigin-RevId: 251349490
This feature allows MemoryFile to delay eviction of "optional"
allocations, such as unused cached file pages.
Note that this incidentally makes CachingInodeOperations writeback
asynchronous, in the sense that it doesn't occur until eviction; this is
necessary because between when a cached page becomes evictable and when
it's evicted, file writes (via CachingInodeOperations.Write) may dirty
the page.
As currently implemented, this feature won't meaningfully impact
steady-state memory usage or caching; the reclaimer goroutine will
schedule eviction as soon as it runs out of other work to do. Future CLs
increase caching by adding constraints on when eviction is scheduled.
PiperOrigin-RevId: 246014822
Change-Id: Ia85feb25a2de92a48359eb84434b6ec6f9bea2cb
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
FD limit and file size limit is read from the host, instead
of using hard-coded defaults, given that they effect the sandbox
process. Also limit the direct cache to use no more than half
if the available FDs.
PiperOrigin-RevId: 244050323
Change-Id: I787ad0fdf07c49d589e51aebfeae477324fe26e6
This is in preparation for improved page cache reclaim, which requires
greater integration between the page cache and page allocator.
PiperOrigin-RevId: 238444706
Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
HandleLocal is very similar conceptually to MULTICAST_LOOP, so we can unify
the implementations. This has the benefit of making HandleLocal apply even when
the fdbased link endpoint isn't in use.
In addition, move looping logic to route creation so that it doesn't need to be
run for each packet. This should improve performance.
PiperOrigin-RevId: 238099480
Change-Id: I72839f16f25310471453bc9d3fb8544815b25c23
If a background process tries to read from a TTY, linux sends it a SIGTTIN
unless the signal is blocked or ignored, or the process group is an orphan, in
which case the syscall returns EIO.
See drivers/tty/n_tty.c:n_tty_read()=>job_control().
If a background process tries to write a TTY, set the termios, or set the
foreground process group, linux then sends a SIGTTOU. If the signal is ignored
or blocked, linux allows the write. If the process group is an orphan, the
syscall returns EIO.
See drivers/tty/tty_io.c:tty_check_change().
PiperOrigin-RevId: 234044367
Change-Id: I009461352ac4f3f11c5d42c43ac36bb0caa580f9
Removed "error" and "failed to" prefix that don't add value
from messages. Adjusted a few other messages. In particular,
when the container fail to start, the message returned is easier
for humans to read:
$ docker run --rm --runtime=runsc alpine foobar
docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory
Closes#77
PiperOrigin-RevId: 230022798
Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
Make 'runsc create' join cgroup before creating sandbox process.
This removes the need to synchronize platform creation and ensure
that sandbox process is charged to the right cgroup from the start.
PiperOrigin-RevId: 227166451
Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
This option is effectively equivalent to -panic-signal, except that the
sandbox does not die after logging the traceback.
PiperOrigin-RevId: 225089593
Change-Id: Ifb1c411210110b6104613f404334bd02175e484e
Before this change, a container starting up could race with
destroy (aka delete) and leave processes behind.
Now, whenever a container is created, Loader.processes gets
a new entry. Start now expects the entry to be there, and if
it's not it means that the container was deleted.
I've also fixed Loader.waitPID to search for the process using
the init process's PID namespace.
We could use a few more tests for signal and wait. I'll send
them in another cl.
PiperOrigin-RevId: 220224290
Change-Id: I15146079f69904dc07d43c3b66cc343a2dab4cc4
Updated error messages so that it doesn't print full Go struct representations
when running a new container in a sandbox. For example, this occurs frequently
when commands are not found when doing a 'kubectl exec'.
PiperOrigin-RevId: 219729141
Change-Id: Ic3a7bc84cd7b2167f495d48a1da241d621d3ca09
Now containers run with "docker run -it" support control characters like ^C and
^Z.
This required refactoring our signal handling a bit. Signals delivered to the
"runsc boot" process are turned into loader.Signal calls with the appropriate
delivery mode. Previously they were always sent directly to PID 1.
PiperOrigin-RevId: 217566770
Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
--pid allows specific processes to be signalled rather than the container root
process or all processes in the container. containerd needs to SIGKILL exec'd
processes that timeout and check whether processes are still alive.
PiperOrigin-RevId: 217547636
Change-Id: I2058ebb548b51c8eb748f5884fb88bad0b532e45
This change introduces a new flags to create/run called
--user-log. Logs to this files are visible to users and
are meant to help debugging problems with their images
and containers.
For now only unsupported syscalls are sent to this log,
and only minimum support was added. We can build more
infrastructure around it as needed.
PiperOrigin-RevId: 216735977
Change-Id: I54427ca194604991c407d49943ab3680470de2d0
Sandbox creation uses the limits and reservations configured in the
OCI spec and set cgroup options accordinly. Then it puts both the
sandbox and gofer processes inside the cgroup.
It also allows the cgroup to be pre-configured by the caller. If the
cgroup already exists, sandbox and gofer processes will join the
cgroup but it will not modify the cgroup with spec limits.
PiperOrigin-RevId: 216538209
Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
We were previously only sending to the originator of the process group.
Integration test was changed to test this behavior. It fails without the
corresponding code change.
PiperOrigin-RevId: 216297263
Change-Id: I7e41cfd6bdd067f4b9dc215e28f555fb5088916f
We were previously using the sandbox process's stdio as the root container's
stdio. This makes it difficult/impossible to distinguish output application
output from sandbox output, such as panics, which are always written to stderr.
Also close the console socket when we are done with it.
PiperOrigin-RevId: 215585180
Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
It's easier to manage a single map with processes that we're interested
to track. This will make the next change to clean up the map on destroy
easier.
PiperOrigin-RevId: 214894210
Change-Id: I099247323a0487cd0767120df47ba786fac0926d
In order to implement kill --all correctly, the Sentry needs
to track all tasks that belong to a given container. This change
introduces ContainerID to the task, that gets inherited by all
children. 'kill --all' then iterates over all tasks comparing the
ContainerID field to find all processes that need to be signalled.
PiperOrigin-RevId: 214841768
Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
This makes the flow slightly simpler (no need to call
Loader.SetRootContainer). And this is required change to tag
tasks with container ID inside the Sentry.
PiperOrigin-RevId: 214795210
Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884