This requires two changes:
1) Support for more than one socket to join a given multicast group.
2) Duplicate delivery of incoming multicast packets to all sockets listening
for it.
In addition, I tweaked the code (and added a test) to disallow duplicates
IP_ADD_MEMBERSHIP calls for the same group and NIC. This is how Linux does
it.
PiperOrigin-RevId: 246437315
Change-Id: Icad8300b4a8c3f501d9b4cd283bd3beabef88b72
Test times out when it runs on a single core. Skip until the
bug in the Go runtime is fixed.
PiperOrigin-RevId: 245866466
Change-Id: Ic3e72131c27136d58b71f6b11acc78abf55895d4
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
Previously, createAt was eating all errors from FindInode except for EACCES and
proceeding with the creation. This is incorrect, as FindInode can return many
other errors (like ENAMETOOLONG) that should stop creation.
This CL changes createAt to return all errors encountered except for ENOENT,
which we can ignore because we are about to create the thing.
PiperOrigin-RevId: 245773222
Change-Id: I1b317021de70f0550fb865506f6d8147d4aebc56
Maximum filename length is filesystem-dependent, and obtained via
statfs::f_namelen. This limit is usually 255 bytes (NAME_MAX), but not
always. For example, VFAT supports filenames of up to 255... UCS-2
characters, which Linux conservatively takes to mean UTF-8-encoded
bytes: fs/fat/inode.c:fat_statfs(), FAT_LFN_LEN * NLS_MAX_CHARSET_SIZE.
As a result, Linux's VFS does not enforce NAME_MAX:
$ rg --maxdepth=1 '\WNAME_MAX\W' fs/ include/linux/
fs/libfs.c
38: buf->f_namelen = NAME_MAX;
64: if (dentry->d_name.len > NAME_MAX)
include/linux/relay.h
74: char base_filename[NAME_MAX]; /* saved base filename */
include/linux/fscrypt.h
149: * filenames up to NAME_MAX bytes, since base64 encoding expands the length.
include/linux/exportfs.h
176: * understanding that it is already pointing to a a %NAME_MAX+1 sized
Remove this check from core VFS, and add it to ramfs (and by extension
tmpfs), where it is actually applicable:
mm/shmem.c:shmem_dir_inode_operations.lookup == simple_lookup *does*
enforce NAME_MAX.
PiperOrigin-RevId: 245324748
Change-Id: I17567c4324bfd60e31746a5270096e75db963fac
TCP tests and the implementation will come in followup CLs.
Updates google/gvisor#206
Updates google/gvisor#207
PiperOrigin-RevId: 245121470
Change-Id: Ib50b62724d3ba0cbfb1374e1f908798431ee2b21
For a symbol link to some directory, eg.
`/tmp/symlink -> /tmp/dir`
`fstatat("/tmp/symlink")` should return symbol link data, but
`fstatat("/tmp/symlink/")` (symlink with trailing slash) should return
directory data it points following linux behaviour.
Currently fstatat() a symlink with trailing slash will get "not a
directory" error which is wrong.
Signed-off-by: Wei Zhang <zhangwei198900@gmail.com>
Change-Id: I63469b1fb89d083d1c1255d32d52864606fbd7e2
PiperOrigin-RevId: 244783916
Support shutdown on only the read side of an endpoint. Reads performed
after a call to Shutdown with only the ShutdownRead flag will return
ErrClosedForReceive without data.
Break out the shutdown(2) with SHUT_RD syscall test into to two tests.
The first tests that no packets are sent when shutting down the read
side of a socket. The second tests that, after shutting down the read
side of a socket, unread data can still be read, or an EOF if there is
no more data to read.
Change-Id: I9d7c0a06937909cbb466b7591544a4bcaebb11ce
PiperOrigin-RevId: 244459430
The MSG_TRUNC flag is set in the msghdr when a message is truncated.
Fixesgoogle/gvisor#200
PiperOrigin-RevId: 244440486
Change-Id: I03c7d5e7f5935c0c6b8d69b012db1780ac5b8456
Inode ids are only guaranteed to be stable across save/restore if the file is
held open. This CL fixes a simple stat test to allow it to compare symlink and
target by inode id, as long as the link target is held open.
PiperOrigin-RevId: 244238343
Change-Id: I74c5115915b1cc032a4c16515a056a480f218f00
The existing logic attempting to do this is incorrect. Unary ^ has
higher precedence than &^, so mask always has UnblockableSignals
cleared, allowing dequeueSignalLocked to dequeue unblockable signals
(which allows userspace to ignore them).
Switch the logic so that unblockable signals are always masked.
PiperOrigin-RevId: 244058487
Change-Id: Ib19630ac04068a1fbfb9dc4a8eab1ccbdb21edc3
FD limit and file size limit is read from the host, instead
of using hard-coded defaults, given that they effect the sandbox
process. Also limit the direct cache to use no more than half
if the available FDs.
PiperOrigin-RevId: 244050323
Change-Id: I787ad0fdf07c49d589e51aebfeae477324fe26e6
Even superuser cannot raise RLIMIT_NOFILE above /proc/sys/fs/nr_open, so
start the test by lowering the limits before raising.
Change-Id: Ied6021c64178a6cb9098088a1a3384db523a226f
PiperOrigin-RevId: 242965249
From a recent test failure:
"State:\tD (disk sleep)\n"
"disk sleep" does not match \w+. We need to allow spaces.
PiperOrigin-RevId: 242762469
Change-Id: Ic8d05a16669412a72c1e76b498373e5b22fe64c4
The previous implementation revolved around runes instead of bytes, which caused
weird behavior when converting between the two. For example, peekRune would read
the byte 0xff from a buffer, convert it to a rune, then return it. As rune is an
alias of int32, 0xff was 0-padded to int32(255), which is the hex code point for
?. However, peekRune also returned the length of the byte (1). When calling
utf8.EncodeRune, we only allocated 1 byte, but tried the write the 2-byte
character ?.
tl;dr: I apparently didn't understand runes when I wrote this.
PiperOrigin-RevId: 241789081
Change-Id: I14c788af4d9754973137801500ef6af7ab8a8727
Also remove comments in InodeOperations that required that implementation of
some Create* operations ensure that the name does not already exist, since
these checks are all centralized in the Dirent.
PiperOrigin-RevId: 241637335
Change-Id: Id098dc6063ff7c38347af29d1369075ad1e89a58
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
We weren't saving simple devices' last allocated inode numbers, which
caused inode number reuse across S/R.
PiperOrigin-RevId: 241414245
Change-Id: I964289978841ef0a57d2fa48daf8eab7633c1284
This reveals a bug in the tests that require CAP_SET{UID,GID}: After the
child process enters the new user namespace, it ceases to have the
relevant capability in the parent user namespace, so the privileged
write must be done by the parent process. Change tests accordingly.
PiperOrigin-RevId: 241412765
Change-Id: I587c1f24aa6f2180fb2e5e5c0162691ba5bac1bc
- Make the body of InForkedProcess async-signal-safe.
- Pass the correct path to open().
PiperOrigin-RevId: 241348774
Change-Id: I753dfa36e4fb05521e659c173e3b7db0c7fc159b
When fork a child process, the name filed of TaskContext is not set.
It results in that when we cat /proc/{pid}/status, the name filed is
null.
Like this:
Name:
State: S (sleeping)
Tgid: 28
Pid: 28
PPid: 26
TracerPid: 0
FDSize: 8
VmSize: 89712 kB
VmRSS: 6648 kB
Threads: 1
CapInh: 00000000a93d35fb
CapPrm: 0000000000000000
CapEff: 0000000000000000
CapBnd: 00000000a93d35fb
Seccomp: 0
Change-Id: I5d469098c37cedd19da16b7ffab2e546a28a321e
PiperOrigin-RevId: 240893304
- Document fsutil.CachedFileObject.FD() requirements on access
permissions, and change gofer.inodeFileState.FD() to honor them.
Fixes#147.
- Combine gofer.inodeFileState.readonly and
gofer.inodeFileState.readthrough, and simplify handle caching logic.
- Inline gofer.cachePolicy.cacheHandles into
gofer.inodeFileState.setSharedHandles, because users with access to
gofer.inodeFileState don't necessarily have access to the fs.Inode
(predictably, this is a save/restore problem).
Before this CL:
$ docker run --runtime=runsc-d -v $(pwd)/gvisor/repro:/root/repro -it ubuntu bash
root@34d51017ed67:/# /root/repro/runsc-b147
mmap: 0x7f3c01e45000
Segmentation fault
After this CL:
$ docker run --runtime=runsc-d -v $(pwd)/gvisor/repro:/root/repro -it ubuntu bash
root@d3c3cb56bbf9:/# /root/repro/runsc-b147
mmap: 0x7f78987ec000
o
PiperOrigin-RevId: 240818413
Change-Id: I49e1d4a81a0cb9177832b0a9f31a10da722a896b
The start time is the number of clock ticks between the boot time and
application start time.
PiperOrigin-RevId: 240619475
Change-Id: Ic8bd7a73e36627ed563988864b0c551c052492a5
Memfds are simply anonymous tmpfs files with no associated
mounts. Also implementing file seals, which Linux only implements for
memfds at the moment.
PiperOrigin-RevId: 240450031
Change-Id: I31de78b950101ae8d7a13d0e93fe52d98ea06f2f