IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
This change does not make use of SACK information but adds support to track
SACK information and store it in the endpoint.
The actual SACK based recovery will be in a separate CL.
Part of commits to add RFC 6675 support to Netstack.
PiperOrigin-RevId: 235612264
Change-Id: I261f94844d7bad5abda803152ce6cc6125a467ff
This change adds support for the SO_BROADCAST socket option in gVisor Netstack.
This support includes getsockopt()/setsockopt() functionality for both UDP and
TCP endpoints (the latter being a NOOP), dispatching broadcast messages up and
down the stack, and route finding/creation for broadcast packets. Finally, a
suite of tests have been implemented, exercising this functionality through the
Linux syscall API.
PiperOrigin-RevId: 234850781
Change-Id: If3e666666917d39f55083741c78314a06defb26c
This allows setting a default send interface for IPv4 multicast. IPv6 support
will come later.
PiperOrigin-RevId: 234251379
Change-Id: I65922341cd8b8880f690fae3eeb7ddfa47c8c173
SO_TIMESTAMP is reimplemented in ping and UDP sockets (and needs to be added for
TCP), but can just be implemented in epsocket for simplicity. This will also
make SIOCGSTAMP easier to implement.
PiperOrigin-RevId: 234179300
Change-Id: Ib5ea0b1261dc218c1a8b15a65775de0050fe3230
RFC7323 recommends that if the timestamp option was negotiated
then all packets should carry a TCP Timestamp and any packets that
do not should be dropped.
Netstack implemented this behaviour. Linux OTOH does not and will
accept such packets. This change makes Netstack behaviour compatible
with Linux.
Also now that we allow such packets, we do need to update RTO calculations
based on these packets even if timestamp option is enabled.
PiperOrigin-RevId: 233432268
Change-Id: I9f4742ae6b63930ac3b5e37d8c238761e6a4b29f
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in
a followup CL.
PiperOrigin-RevId: 233008638
Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
quoting what "rscheff@gmx.at" pointed out over email.
"IsLost in RFC3517 is defined as >= (DupThresh * SMSS) while
RFC6675 improves upon this, and defines IsLost as >
((DupThresh - 1) * SMSS + 1).
The latter addresses situations where partial segments (size < MSS)
are sent (eg. last segment of a http protocol message sent with PSH
being less than MSS is common)."
PiperOrigin-RevId: 231512331
Change-Id: I1addd4a92e3e7baeb0bdda46463ebfae435da958
This option allows multiple sockets to be bound to the same port.
Incoming packets are distributed to sockets using a hash based on source and
destination addresses. This means that all packets from one sender will be
received by the same server socket.
PiperOrigin-RevId: 227153413
Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
We don't explicitly support out-of-band data and treat it like normal in-band
data. This is equilivent to SO_OOBINLINE being enabled, so always report that
it is enabled.
PiperOrigin-RevId: 226572742
Change-Id: I4c30ccb83265e76c30dea631cbf86822e6ee1c1b
Within gVisor, plumb new socket options to netstack.
Within netstack, fix GetSockOpt and SetSockOpt return value logic.
PiperOrigin-RevId: 226532229
Change-Id: If40734e119eed633335f40b4c26facbebc791c74
Previously, TCP_NODELAY was always enabled and we would lie about it being
configurable. TCP_NODELAY is now disabled by default (to match Linux) in the
socket layer so that non-gVisor users don't automatically start using this
questionable optimization.
PiperOrigin-RevId: 221368472
Change-Id: Ib0240f66d94455081f4e0ca94f09d9338b2c1356
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
* Integrate recvMsg and sendMsg functions into Recv and Send respectively as
they are no longer shared.
* Clean up partial read/write error handling code.
* Re-order code to make sense given that there is no longer a host.endpoint
type.
PiperOrigin-RevId: 217255072
Change-Id: Ib43fe9286452f813b8309d969be11f5fa40694cd
host.endpoint contained duplicated logic from the sockerpair implementation and
host.ConnectedEndpoint. Remove host.endpoint in favor of a
host.ConnectedEndpoint wrapped in a socketpair end.
PiperOrigin-RevId: 217240096
Change-Id: I4a3d51e3fe82bdf30e2d0152458b8499ab4c987c
Currently, in the face of FileMem fragmentation and a large sendmsg or
recvmsg call, host sockets may pass > 1024 iovecs to the host, which
will immediately cause the host to return EMSGSIZE.
When we detect this case, use a single intermediate buffer to pass to
the kernel, copying to/from the src/dst buffer.
To avoid creating unbounded intermediate buffers, enforce message size
checks and truncation w.r.t. the send buffer size. The same
functionality is added to netstack unix sockets for feature parity.
PiperOrigin-RevId: 216590198
Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
Previously, if address resolution for UDP or Ping sockets required sending
packets using Write in Transport layer, Resolve would return ErrWouldBlock
and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution
would run in background. Further calls to Write using same address would also
return ErrNoLinkAddress until resolution has been completed successfully.
Since Write is not allowed to block and System Calls need to be
interruptible in System Call layer, the caller to Write is responsible for
blocking upon return of ErrWouldBlock.
Now, when startAddressResolution is called a notification channel for
the completion of the address resolution is returned.
The channel will traverse up to the calling function of Write as well as
ErrNoLinkAddress. Once address resolution is complete (success or not) the
channel is closed. The caller would call Write again to send packets and
check if address resolution was compeleted successfully or not.
Fixesgoogle/gvisor#5
Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93
PiperOrigin-RevId: 214962200
From RFC7323#Section-4
The [RFC6298] RTT estimator has weighting factors, alpha and beta, based on an
implicit assumption that at most one RTTM will be sampled per RTT. When
multiple RTTMs per RTT are available to update the RTT estimator, an
implementation SHOULD try to adhere to the spirit of the history specified in
[RFC6298]. An implementation suggestion is detailed in Appendix G.
From RFC7323#appendix-G
Appendix G. RTO Calculation Modification
Taking multiple RTT samples per window would shorten the history calculated
by the RTO mechanism in [RFC6298], and the below algorithm aims to maintain a
similar history as originally intended by [RFC6298].
It is roughly known how many samples a congestion window worth of data will
yield, not accounting for ACK compression, and ACK losses. Such events will
result in more history of the path being reflected in the final value for
RTO, and are uncritical. This modification will ensure that a similar amount
of time is taken into account for the RTO estimation, regardless of how many
samples are taken per window:
ExpectedSamples = ceiling(FlightSize / (SMSS * 2))
alpha' = alpha / ExpectedSamples
beta' = beta / ExpectedSamples
Note that the factor 2 in ExpectedSamples is due to "Delayed ACKs".
Instead of using alpha and beta in the algorithm of [RFC6298], use alpha' and
beta' instead:
RTTVAR <- (1 - beta') * RTTVAR + beta' * |SRTT - R'|
SRTT <- (1 - alpha') * SRTT + alpha' * R'
(for each sample R')
PiperOrigin-RevId: 213644795
Change-Id: I52278b703540408938a8edb8c38be97b37f4a10e
Kevin Krakauer
Ian Gudger
Bhasker Hariharan
Amanda Tait
Googler
Michael Pratt
Zhaozhong Ni
Andrei Vagin
Fabricio Voznika
Adin Scannell
Sepehr Raissian
Tamir Duberstein