This does not actually implement an efficient splice or sendfile. Rather, it
adds a generic plumbing to the file internals so that this can be added. All
file implementations use the stub fileutil.NoSplice implementation, which
causes sendfile and splice to fall back to an internal copy.
A basic splice system call interface is added, along with a test.
PiperOrigin-RevId: 249335960
Change-Id: Ic5568be2af0a505c19e7aec66d5af2480ab0939b
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
Only emit unimplemented syscall events for setting SO_OOBINLINE and SO_LINGER
when attempting to set unsupported values.
PiperOrigin-RevId: 244229675
Change-Id: Icc4562af8f733dd75a90404621711f01a32a9fc1
The previous implementation revolved around runes instead of bytes, which caused
weird behavior when converting between the two. For example, peekRune would read
the byte 0xff from a buffer, convert it to a rune, then return it. As rune is an
alias of int32, 0xff was 0-padded to int32(255), which is the hex code point for
?. However, peekRune also returned the length of the byte (1). When calling
utf8.EncodeRune, we only allocated 1 byte, but tried the write the 2-byte
character ?.
tl;dr: I apparently didn't understand runes when I wrote this.
PiperOrigin-RevId: 241789081
Change-Id: I14c788af4d9754973137801500ef6af7ab8a8727
Memfds are simply anonymous tmpfs files with no associated
mounts. Also implementing file seals, which Linux only implements for
memfds at the moment.
PiperOrigin-RevId: 240450031
Change-Id: I31de78b950101ae8d7a13d0e93fe52d98ea06f2f
It is Implemented without the priority inheritance part given
that gVisor defers scheduling decisions to Go runtime and doesn't
have control over it.
PiperOrigin-RevId: 236989545
Change-Id: I714c8ca0798743ecf3167b14ffeb5cd834302560
CopyObjectOut grows its destination byte slice incrementally, causing
many small slice allocations on the heap. This leads to increased GC and
noticeably slower stat calls.
PiperOrigin-RevId: 233140904
Change-Id: Ieb90295dd8dd45b3e56506fef9d7f86c92e97d97
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in
a followup CL.
PiperOrigin-RevId: 233008638
Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
More helper structs have been added to the fsutil package to make it easier to
implement fs.InodeOperations and fs.FileOperations.
PiperOrigin-RevId: 229305982
Change-Id: Ib6f8d3862f4216745116857913dbfa351530223b
Using linux.Errno as an error doesn't work very well as none of the sentry code
expects error to contain a linux.Errno.
This moves using syserr.Error.ToLinux as an error in a syscall handler from a
runtime error to a compile error.
PiperOrigin-RevId: 227744312
Change-Id: Iea63108a5b198296c908614e09c01733dd684da0
Within gVisor, plumb new socket options to netstack.
Within netstack, fix GetSockOpt and SetSockOpt return value logic.
PiperOrigin-RevId: 226532229
Change-Id: If40734e119eed633335f40b4c26facbebc791c74
Implement pwritev2 and associated unit tests.
Clean up preadv2 unit tests.
Tag RWF_ flags in both preadv2 and pwritev2 with associated bug tickets.
PiperOrigin-RevId: 226222119
Change-Id: Ieb22672418812894ba114bbc88e67f1dd50de620
Currently mlock() and friends do nothing whatsoever. However, mlocking
is directly application-visible in a number of ways; for example,
madvise(MADV_DONTNEED) and msync(MS_INVALIDATE) both fail on mlocked
regions. We handle this inconsistently: MADV_DONTNEED is too important
to not work, but MS_INVALIDATE is rejected.
Change MM to track mlocked regions in a manner consistent with Linux.
It still will not actually pin pages into host physical memory, but:
- mlock() will now cause sentry memory management to precommit mlocked
pages.
- MADV_DONTNEED and MS_INVALIDATE will interact with mlocked pages as
described above.
PiperOrigin-RevId: 225861605
Change-Id: Iee187204979ac9a4d15d0e037c152c0902c8d0ee
Unlike FlagSet, order doesn't matter here, so it can simply be a map.
PiperOrigin-RevId: 224377910
Change-Id: I15810c698a7f02d8614bf09b59583ab73cba0514
RET_KILL_THREAD doesn't work well for Go because it will
kill only the offending thread and leave the process hanging.
RET_TRAP can be masked out and it's not guaranteed to kill
the process. RET_KILL_PROCESS is available since 4.14.
For older kernel, continue to use RET_TRAP as this is the
best option (likely to kill process, easy to debug).
PiperOrigin-RevId: 222357867
Change-Id: Icc1d7d731274b16c2125b7a1ba4f7883fbdb2cbd
sync_file_range - sync a file segment with disk
In Linux, sync_file_range() accepts three flags:
SYNC_FILE_RANGE_WAIT_BEFORE
Wait upon write-out of all pages in the specified range that
have already been submitted to the device driver for write-out
before performing any write.
SYNC_FILE_RANGE_WRITE
Initiate write-out of all dirty pages in the specified range
which are not presently submitted write-out. Note that even
this may block if you attempt to write more than request queue
size.
SYNC_FILE_RANGE_WAIT_AFTER
Wait upon write-out of all pages in the range after performing
any write.
In this implementation:
SYNC_FILE_RANGE_WAIT_BEFORE without SYNC_FILE_RANGE_WAIT_AFTER isn't
supported right now.
SYNC_FILE_RANGE_WRITE is skipped. It should initiate write-out of all
dirty pages, but it doesn't wait, so it should be safe to do nothing
while nobody uses SYNC_FILE_RANGE_WAIT_BEFORE.
SYNC_FILE_RANGE_WAIT_AFTER is equal to fdatasync(). In Linux,
sync_file_range() doesn't writes out the file's meta-data, but
fdatasync() does if a file size is changed.
PiperOrigin-RevId: 220730840
Change-Id: Iae5dfb23c2c916967d67cf1a1ad32f25eb3f6286
Added events for *ctl syscalls that may have multiple different commands.
For runsc, each syscall event is only logged once. For *ctl syscalls, use
the cmd as identifier, not only the syscall number.
PiperOrigin-RevId: 218015941
Change-Id: Ie3c19131ae36124861e9b492a7dbe1765d9e5e59
This is a defense-in-depth measure. If the sentry is compromised, this prevents
system call injection to the stubs. There is some complexity with respect to
ptrace and seccomp interactions, so this protection is not really available
for kernel versions < 4.8; this is detected dynamically.
Note that this also solves the vsyscall emulation issue by adding in
appropriate trapping for those system calls. It does mean that a compromised
sentry could theoretically inject these into the stub (ignoring the trap and
resume, thereby allowing execution), but they are harmless.
PiperOrigin-RevId: 216647581
Change-Id: Id06c232cbac1f9489b1803ec97f83097fcba8eb8
Also properly add padding after Procs in the linux.Sysinfo
structure. This will be implicitly padded to 64bits so we
need to do the same.
PiperOrigin-RevId: 216372907
Change-Id: I6eb6a27800da61d8f7b7b6e87bf0391a48fdb475
We accidentally set the wrong maximum. I've also added PATH_MAX and
NAME_MAX to the linux abi package.
PiperOrigin-RevId: 216221311
Change-Id: I44805fcf21508831809692184a0eba4cee469633
We already forward TCSETS and TCSETSW. TCSETSF is roughly equivalent but
discards pending input.
The filters were relaxed to allow host ioctls with TCSETSF argument.
This fixes programs like "passwd" that prevent user input from being displayed
on the terminal.
Before:
root@b8a0240fc836:/# passwd
Enter new UNIX password: 123
Retype new UNIX password: 123
passwd: password updated successfully
After:
root@ae6f5dabe402:/# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
PiperOrigin-RevId: 214869788
Change-Id: I31b4d1373c1388f7b51d0f2f45ce40aa8e8b0b58
Implements the TIOCGWINSZ and TIOCSWINSZ ioctls, which allow processes to resize
the terminal. This allows, for example, sshd to properly set the window size for
ssh sessions.
PiperOrigin-RevId: 210392504
Change-Id: I0d4789154d6d22f02509b31d71392e13ee4a50ba
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
Currently the implementation matches the behavior of moving data
between two file descriptors. However, it does not implement this
through zero-copy movement. Thus, this code is a starting point
to build the more complex implementation.
PiperOrigin-RevId: 208284483
Change-Id: Ibde79520a3d50bc26aead7ad4f128d2be31db14e
Adin Scannell
Fabricio Voznika
Kevin Krakauer
Michael Pratt
Ian Gudger
Rahat Mahmood
Nicolas Lacasse
Jamie Liu
Googler
Zach Koopmans
Bin Lu
Andrei Vagin
Brian Geffon
Justine Olshan
Zhaozhong Ni