The implementation is similar to linux where we track the number of bytes
consumed by the application to grow the receive buffer of a given TCP endpoint.
This ensures that the advertised window grows at a reasonable rate to accomodate
for the sender's rate and prevents large amounts of data being held in stack
buffers if the application is not actively reading or not reading fast enough.
The original paper that was used to implement the linux receive buffer auto-
tuning is available @ https://public.lanl.gov/radiant/pubs/drs/lacsi2001.pdf
NOTE: Linux does not implement DRS as defined in that paper, it's just a good
reference to understand the solution space.
Updates #230
PiperOrigin-RevId: 253168283
This CL also cleans up the error returned for setting congestion
control which was incorrectly returning EINVAL instead of ENOENT.
PiperOrigin-RevId: 252889093
Changes netstack to confirm to current linux behaviour where if the backlog is
full then we drop the SYN and do not send a SYN-ACK. Similarly we allow upto
backlog connections to be in SYN-RCVD state as long as the backlog is not full.
We also now drop a SYN if syn cookies are in use and the backlog for the
listening endpoint is full.
Added new tests to confirm the behaviour.
Also reverted the change to increase the backlog in TcpPortReuseMultiThread
syscall test.
Fixes#236
PiperOrigin-RevId: 252500462
This is necessary for implementing network diagnostic interfaces like
/proc/net/{tcp,udp,unix} and sock_diag(7).
For pass-through endpoints such as hostinet, we obtain the socket
state from the backend. For netstack, we add explicit tracking of TCP
states.
PiperOrigin-RevId: 251934850
In case of GSO, a segment can container more than one packet
and we need to use the pCount() helper to get a number of packets.
PiperOrigin-RevId: 251743020
When checking the length of the acceptedChan we should hold the
endpoint mutex otherwise a syn received while the listening socket
is being closed can result in a data race where the cleanupLocked
routine sets acceptedChan to nil while a handshake goroutine
in progress could try and check it at the same time.
PiperOrigin-RevId: 251537697
Netstack sets the unprocessed segment queue size to match the receive
buffer size. This is not required as this queue only needs to hold enough
for a short duration before the endpoint goroutine can process it.
Updates #230
PiperOrigin-RevId: 250976323
Netstack listen loop can get stuck if cookies are in-use and the app is slow to
accept incoming connections. Further we continue to complete handshake for a
connection even if the backlog is full. This creates a problem when a lots of
connections come in rapidly and we end up with lots of completed connections
just hanging around to be delivered.
These fixes change netstack behaviour to mirror what linux does as described
here in the following article
http://veithen.io/2014/01/01/how-tcp-backlog-works-in-linux.html
Now when cookies are not in-use Netstack will silently drop the ACK to a SYN-ACK
and not complete the handshake if the backlog is full. This will result in the
connection staying in a half-complete state. Eventually the sender will
retransmit the ACK and if backlog has space we will transition to a connected
state and deliver the endpoint.
Similarly when cookies are in use we do not try and create an endpoint unless
there is space in the accept queue to accept the newly created endpoint. If
there is no space then we again silently drop the ACK as we can just recreate it
when the ACK is retransmitted by the peer.
We also now use the backlog to cap the size of the SYN-RCVD queue for a given
endpoint. So at any time there can be N connections in the backlog and N in a
SYN-RCVD state if the application is not accepting connections. Any new SYNs
will be dropped.
This CL also fixes another small bug where we mark a new endpoint which has not
completed handshake as connected. We should wait till handshake successfully
completes before marking it connected.
Updates #236
PiperOrigin-RevId: 250717817
These wakers are uselessly allocated and passed around; nothing ever
listens for notifications on them. The code here appears to be
vestigial, so removing it and allowing a nil waker to be passed seems
appropriate.
PiperOrigin-RevId: 249879320
Change-Id: Icd209fb77cc0dd4e5c49d7a9f2adc32bf88b4b71
And stop storing the Filesystem in the MountSource.
This allows us to decouple the MountSource filesystem type from the name of the
filesystem.
PiperOrigin-RevId: 247292982
Change-Id: I49cbcce3c17883b7aa918ba76203dfd6d1b03cc8
Some behavior was broken due to the difficulty of running automated raw
socket tests.
Change-Id: I152ca53916bb24a0208f2dc1c4f5bc87f4724ff6
PiperOrigin-RevId: 246747067
- include packet_list.go
- exclude state.go (by renaming to include an underscore)
Also rename raw.go to endpoint.go for consistency.
PiperOrigin-RevId: 246547912
Change-Id: I19c8331c794ba683a940cc96a8be6497b53ff24d
This requires two changes:
1) Support for more than one socket to join a given multicast group.
2) Duplicate delivery of incoming multicast packets to all sockets listening
for it.
In addition, I tweaked the code (and added a test) to disallow duplicates
IP_ADD_MEMBERSHIP calls for the same group and NIC. This is how Linux does
it.
PiperOrigin-RevId: 246437315
Change-Id: Icad8300b4a8c3f501d9b4cd283bd3beabef88b72
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
Support shutdown on only the read side of an endpoint. Reads performed
after a call to Shutdown with only the ShutdownRead flag will return
ErrClosedForReceive without data.
Break out the shutdown(2) with SHUT_RD syscall test into to two tests.
The first tests that no packets are sent when shutting down the read
side of a socket. The second tests that, after shutting down the read
side of a socket, unread data can still be read, or an EOF if there is
no more data to read.
Change-Id: I9d7c0a06937909cbb466b7591544a4bcaebb11ce
PiperOrigin-RevId: 244459430
It is possible to create a listening socket which will accept
IPv4 and IPv6 connections. In this case, we set IPv6ProtocolNumber
for all accepted endpoints, even if they handle IPv4 connections.
This means that we can't use endpoint.netProto to set gso.L3HdrLen.
PiperOrigin-RevId: 244227948
Change-Id: I5e1863596cb9f3d216febacdb7dc75651882eef1
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
The panic was caused by modifying the tree while iterating which invalidated the
iterator.
Also fixes another bug in SACKScoreboard.Insert() which was causing blocks to be
merged incorrectly.
PiperOrigin-RevId: 240895053
Change-Id: Ia72b8244297962df5c04283346da5226434740af
The linux packet socket can handle GSO packets, so we can segment packets to
64K instead of the MTU which is usually 1500.
Here are numbers for the nginx-1m test:
runsc: 579330.01 [Kbytes/sec] received
runsc-gso: 1794121.66 [Kbytes/sec] received
runc: 2122139.06 [Kbytes/sec] received
and for tcp_benchmark:
$ tcp_benchmark --duration 15 --ideal
[ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal
[ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal --gso 65536
[ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec
PiperOrigin-RevId: 240809103
Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
This is a preparation for GSO changes (cl/234508902).
RELNOTES[gofers]: Refactor checksum code to include length, which
it already did, but in a convoluted way. Should be a no-op.
PiperOrigin-RevId: 240460794
Change-Id: I537381bc670b5a9f5d70a87aa3eb7252e8f5ace2
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
This change does not make use of SACK information but adds support to track
SACK information and store it in the endpoint.
The actual SACK based recovery will be in a separate CL.
Part of commits to add RFC 6675 support to Netstack.
PiperOrigin-RevId: 235612264
Change-Id: I261f94844d7bad5abda803152ce6cc6125a467ff
This change adds support for the SO_BROADCAST socket option in gVisor Netstack.
This support includes getsockopt()/setsockopt() functionality for both UDP and
TCP endpoints (the latter being a NOOP), dispatching broadcast messages up and
down the stack, and route finding/creation for broadcast packets. Finally, a
suite of tests have been implemented, exercising this functionality through the
Linux syscall API.
PiperOrigin-RevId: 234850781
Change-Id: If3e666666917d39f55083741c78314a06defb26c
This allows setting a default send interface for IPv4 multicast. IPv6 support
will come later.
PiperOrigin-RevId: 234251379
Change-Id: I65922341cd8b8880f690fae3eeb7ddfa47c8c173
SO_TIMESTAMP is reimplemented in ping and UDP sockets (and needs to be added for
TCP), but can just be implemented in epsocket for simplicity. This will also
make SIOCGSTAMP easier to implement.
PiperOrigin-RevId: 234179300
Change-Id: Ib5ea0b1261dc218c1a8b15a65775de0050fe3230
RFC7323 recommends that if the timestamp option was negotiated
then all packets should carry a TCP Timestamp and any packets that
do not should be dropped.
Netstack implemented this behaviour. Linux OTOH does not and will
accept such packets. This change makes Netstack behaviour compatible
with Linux.
Also now that we allow such packets, we do need to update RTO calculations
based on these packets even if timestamp option is enabled.
PiperOrigin-RevId: 233432268
Change-Id: I9f4742ae6b63930ac3b5e37d8c238761e6a4b29f
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in
a followup CL.
PiperOrigin-RevId: 233008638
Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0