Each gofer now has a goroutine that polls on the FDs used
to communicate with the sandbox. The respective gofer is
destroyed if any of the FDs is closed.
Closes#601
PiperOrigin-RevId: 261383725
We can get the mount namespace from the CreateProcessArgs in all cases where we
need it. This also gets rid of kernel.Destroy method, since the only thing it
was doing was DecRefing the mounts.
Removing the need to call kernel.SetRootMountNamespace also allowed for some
more simplifications in the container fs setup code.
PiperOrigin-RevId: 261357060
The different containers in a sandbox used only one pid
namespace before. This results in that a container can see
the processes in another container in the same sandbox.
This patch use different pid namespace for different containers.
Signed-off-by: chris.zn <chris.zn@antfin.com>
This keeps all container filesystem completely separate from eachother
(including from the root container filesystem), and allows us to get rid of the
"__runsc_containers__" directory.
It also simplifies container startup/teardown as we don't have to muck around
in the root container's filesystem.
PiperOrigin-RevId: 259613346
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire
package to itself and didn't serve much use (it was freely cast between types,
and served as more of an annoyance than providing any protection.)
Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup
operation, and 10-15 ns per concurrent lookup operation of savings.
This also fixes two tangential usage issues with the FDMap. Namely, non-atomic
use of NewFDFrom and associated calls to Remove (that are both racy and fail to
drop the reference on the underlying file.)
PiperOrigin-RevId: 256285890
runsc will now set the HOME environment variable as required by POSIX. The
user's home directory is retrieved from the /etc/passwd file located on the
container's file system during boot.
PiperOrigin-RevId: 253120627
Parse annotations containing 'gvisor.dev/spec/mount' that gives
hints about how mounts are shared between containers inside a
pod. This information can be used to better inform how to mount
these volumes inside gVisor. For example, a volume that is shared
between containers inside a pod can be bind mounted inside the
sandbox, instead of being two independent mounts.
For now, this information is used to allow the same tmpfs mounts
to be shared between containers which wasn't possible before.
PiperOrigin-RevId: 252704037
No change in functionaly. Added containerMounter object
to keep state while the mounts are processed. This will
help upcoming changes to share mounts per-pod.
PiperOrigin-RevId: 251350096
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes#234
PiperOrigin-RevId: 251349490
This feature allows MemoryFile to delay eviction of "optional"
allocations, such as unused cached file pages.
Note that this incidentally makes CachingInodeOperations writeback
asynchronous, in the sense that it doesn't occur until eviction; this is
necessary because between when a cached page becomes evictable and when
it's evicted, file writes (via CachingInodeOperations.Write) may dirty
the page.
As currently implemented, this feature won't meaningfully impact
steady-state memory usage or caching; the reclaimer goroutine will
schedule eviction as soon as it runs out of other work to do. Future CLs
increase caching by adding constraints on when eviction is scheduled.
PiperOrigin-RevId: 246014822
Change-Id: Ia85feb25a2de92a48359eb84434b6ec6f9bea2cb
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
FD limit and file size limit is read from the host, instead
of using hard-coded defaults, given that they effect the sandbox
process. Also limit the direct cache to use no more than half
if the available FDs.
PiperOrigin-RevId: 244050323
Change-Id: I787ad0fdf07c49d589e51aebfeae477324fe26e6
This is in preparation for improved page cache reclaim, which requires
greater integration between the page cache and page allocator.
PiperOrigin-RevId: 238444706
Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
HandleLocal is very similar conceptually to MULTICAST_LOOP, so we can unify
the implementations. This has the benefit of making HandleLocal apply even when
the fdbased link endpoint isn't in use.
In addition, move looping logic to route creation so that it doesn't need to be
run for each packet. This should improve performance.
PiperOrigin-RevId: 238099480
Change-Id: I72839f16f25310471453bc9d3fb8544815b25c23
If a background process tries to read from a TTY, linux sends it a SIGTTIN
unless the signal is blocked or ignored, or the process group is an orphan, in
which case the syscall returns EIO.
See drivers/tty/n_tty.c:n_tty_read()=>job_control().
If a background process tries to write a TTY, set the termios, or set the
foreground process group, linux then sends a SIGTTOU. If the signal is ignored
or blocked, linux allows the write. If the process group is an orphan, the
syscall returns EIO.
See drivers/tty/tty_io.c:tty_check_change().
PiperOrigin-RevId: 234044367
Change-Id: I009461352ac4f3f11c5d42c43ac36bb0caa580f9
Removed "error" and "failed to" prefix that don't add value
from messages. Adjusted a few other messages. In particular,
when the container fail to start, the message returned is easier
for humans to read:
$ docker run --rm --runtime=runsc alpine foobar
docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory
Closes#77
PiperOrigin-RevId: 230022798
Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
Make 'runsc create' join cgroup before creating sandbox process.
This removes the need to synchronize platform creation and ensure
that sandbox process is charged to the right cgroup from the start.
PiperOrigin-RevId: 227166451
Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
This option is effectively equivalent to -panic-signal, except that the
sandbox does not die after logging the traceback.
PiperOrigin-RevId: 225089593
Change-Id: Ifb1c411210110b6104613f404334bd02175e484e
Before this change, a container starting up could race with
destroy (aka delete) and leave processes behind.
Now, whenever a container is created, Loader.processes gets
a new entry. Start now expects the entry to be there, and if
it's not it means that the container was deleted.
I've also fixed Loader.waitPID to search for the process using
the init process's PID namespace.
We could use a few more tests for signal and wait. I'll send
them in another cl.
PiperOrigin-RevId: 220224290
Change-Id: I15146079f69904dc07d43c3b66cc343a2dab4cc4
Updated error messages so that it doesn't print full Go struct representations
when running a new container in a sandbox. For example, this occurs frequently
when commands are not found when doing a 'kubectl exec'.
PiperOrigin-RevId: 219729141
Change-Id: Ic3a7bc84cd7b2167f495d48a1da241d621d3ca09
Now containers run with "docker run -it" support control characters like ^C and
^Z.
This required refactoring our signal handling a bit. Signals delivered to the
"runsc boot" process are turned into loader.Signal calls with the appropriate
delivery mode. Previously they were always sent directly to PID 1.
PiperOrigin-RevId: 217566770
Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
--pid allows specific processes to be signalled rather than the container root
process or all processes in the container. containerd needs to SIGKILL exec'd
processes that timeout and check whether processes are still alive.
PiperOrigin-RevId: 217547636
Change-Id: I2058ebb548b51c8eb748f5884fb88bad0b532e45
This change introduces a new flags to create/run called
--user-log. Logs to this files are visible to users and
are meant to help debugging problems with their images
and containers.
For now only unsupported syscalls are sent to this log,
and only minimum support was added. We can build more
infrastructure around it as needed.
PiperOrigin-RevId: 216735977
Change-Id: I54427ca194604991c407d49943ab3680470de2d0
Sandbox creation uses the limits and reservations configured in the
OCI spec and set cgroup options accordinly. Then it puts both the
sandbox and gofer processes inside the cgroup.
It also allows the cgroup to be pre-configured by the caller. If the
cgroup already exists, sandbox and gofer processes will join the
cgroup but it will not modify the cgroup with spec limits.
PiperOrigin-RevId: 216538209
Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
Fabricio Voznika
Nicolas Lacasse
gVisor bot
chris.zn
Andrei Vagin
Adin Scannell
Ian Gudger
Bhasker Hariharan
Ian Lewis
Josh Gao
Jamie Liu
Michael Pratt
Kevin Krakauer
Jonathan Giannuzzi