In the case of a rename replacing an existing destination inode, ramfs
Rename failed to first remove the replaced inode. This caused:
1. A leak of a reference to the inode (making it live indefinitely).
2. For directories, a leak of the replaced directory's .. link to the
parent. This would cause the parent's link count to incorrectly
increase.
(2) is much simpler to test than (1), so that's what I've done.
agentfs has a similar bug with link count only, so the Dirent layer
informs the Inode if this is a replacing rename.
Fixes#133
PiperOrigin-RevId: 239105698
Change-Id: I4450af2462d8ae3339def812287213d2cbeebde0
getsockopt(IP_MULTICAST_IF) only supports struct in_addr.
Also adds support for setsockopt(IP_MULTICAST_IF) with struct in_addr.
PiperOrigin-RevId: 237620230
Change-Id: I75e7b5b3e08972164eb1906f43ddd67aedffc27c
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
* open_create_test_runsc_ptrace_shared doesn't expect the write access to /
* exec_test_runsc_ptrace_shared could not find /usr/share/zoneinfo/
* clock_gettime_test_runsc_ptrace_shared didn't expect that
a thread cpu time can be zero.
* affinity_test_runsc_ptrace_shared expected minimum 3 cpus
PiperOrigin-RevId: 237509429
Change-Id: I477937e5d2cdf3f8720836bfa972abd35d8220a3
Now that tests aren't running in parallel, this test occassionally
takes too long and times out.
PiperOrigin-RevId: 237106971
Change-Id: I195a4b77315c9f5511c9e8ffadddb7aaa78beafd
ScopedSigaction is not async-signal-safe, so it cannot be used after fork.
Replace it with plain sigaction, which is safe. This is in a unique child
anyways, so it doesn't need any cleanup.
PiperOrigin-RevId: 237102411
Change-Id: I5c6ea373bbac67b9c4db204ceb1db62d338d9178
It is Implemented without the priority inheritance part given
that gVisor defers scheduling decisions to Go runtime and doesn't
have control over it.
PiperOrigin-RevId: 236989545
Change-Id: I714c8ca0798743ecf3167b14ffeb5cd834302560
Tests using DisableSave because a portion of the test is *incompatible*
with S/R clearly cannot use random S/R, as the saves may occur in the
DisableSave critical section.
Most such tests already have NoRandomSave. Add it to the rest.
PiperOrigin-RevId: 236914708
Change-Id: Iee1cf044cfa7cb8d5aba21ddc130926218210c48
When run in parallel, multicast packets can be received by the wrong test. The
tests in the target are run in an isolated network namespace, but if
parallelism is enabled, multiple tests from the same target will run in
parallel within the target's network namespace. Disabling parallelism only
allows one test to run in the network namespace at a time, which prevents
interaction.
PiperOrigin-RevId: 236709160
Change-Id: If828db44f0ae4002af36de6097866137c8d9da5c
The specific issue was:
- Test creates a raw ICMP socket
- Test sends an ICMP echo request (aka ping request) to itself via loopback
- Now two events race:
- The raw socket recieves the ICMP echo request
- Netstack receives the request and generates a reply (aka ping reply),
which it sends back over loopback, where it is eventually received by the
raw socket
- The test was written to expect packets in a specific order, but they can
come in any order.
PiperOrigin-RevId: 236179066
Change-Id: I02c07c919d3d28093add3d18dd9196fbbc870813
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
There was a minor bug whth IsPosixErrorOkAndHoldsMatcher where
it wouldn't display the actual value contained. This fixes that
and adds a few other minor improvements.
PiperOrigin-RevId: 235809065
Change-Id: I487e5072e9569eb06104522963e9a1b34204daaf
This solves two problems:
1. Using the host /tmp directly meant that concurrent tests could
collide attempting to use the same file, and that misbehaving tests
never have their /tmp output cleaned up.
2. Host /tmp is not world-accessible on all hosts. Some tests (e.g.,
sticky) access files in /tmp from other users, so we need to ensure
that its /tmp is world-accessible.
PiperOrigin-RevId: 235637873
Change-Id: I7555224685ac5b93af88c403196b09ce1bb2bfe7
This change adds support for the SO_BROADCAST socket option in gVisor Netstack.
This support includes getsockopt()/setsockopt() functionality for both UDP and
TCP endpoints (the latter being a NOOP), dispatching broadcast messages up and
down the stack, and route finding/creation for broadcast packets. Finally, a
suite of tests have been implemented, exercising this functionality through the
Linux syscall API.
PiperOrigin-RevId: 234850781
Change-Id: If3e666666917d39f55083741c78314a06defb26c
- Use new user namespace for namespace creation checks.
- Ensure userns is never nil since it's used by other namespaces.
PiperOrigin-RevId: 234673175
Change-Id: I4b9d9d1e63ce4e24362089793961a996f7540cd9
In addition to simplifying the implementation, this fixes two bugs:
- seqfile.NewSeqFile unconditionally creates an inode with mode 0444,
but {uid,gid}_map have mode 0644.
- idMapSeqFile.Write implements fs.FileOperations.Write ... but it
doesn't implement any other fs.FileOperations methods and is never
used as fs.FileOperations. idMapSeqFile.GetFile() =>
seqfile.SeqFile.GetFile() uses seqfile.seqFileOperations instead,
which rejects all writes.
PiperOrigin-RevId: 234638212
Change-Id: I4568f741ab07929273a009d7e468c8205a8541bc
This allows setting a default send interface for IPv4 multicast. IPv6 support
will come later.
PiperOrigin-RevId: 234251379
Change-Id: I65922341cd8b8880f690fae3eeb7ddfa47c8c173
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in
a followup CL.
PiperOrigin-RevId: 233008638
Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
- Change proc to return envp on overwrite of argv with limitations from
upstream.
- Add unit tests
- Change layout of argv/envp on the stack so that end of argv is contiguous with
beginning of envp.
PiperOrigin-RevId: 232506107
Change-Id: I993880499ab2c1220f6dc456a922235c49304dec
Multiple tests were creating the same directory before removing it, making it
possible for concurrent tests to fail because the directory already exists.
PiperOrigin-RevId: 232389814
Change-Id: I35d409fff4b3fd864b30fee742cb587b14975c23
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
stdout can be (and, in automated testing, often is) a host pipe or
similar resource shared between multiple parallel tests, such that it
can become transiently full during testing.
PiperOrigin-RevId: 231413569
Change-Id: Id14991b5f71e53c894695899e65e1be4dd228cc6
The implementation of O_CLOEXEC is orthogonal to every property tested
by these tests; removing it significantly reduces the number of
redundant tests we run.
Also remove no-op calls to VecCat (calls with a single argument).
PiperOrigin-RevId: 230959537
Change-Id: I83fe7db24e481ef67ca1f1992228af423f640b5c