When VectorisedViews were passed up the stack from packet_dispatchers, we were
passing a sub-slice of the dispatcher's views fields. The dispatchers then
immediately set those views to nil.
This wasn't caught before because every implementer copied the data in these
views before returning.
PiperOrigin-RevId: 277615351
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
The behavior for sending and receiving local broadcast (255.255.255.255)
traffic is as follows:
Outgoing
--------
* A broadcast packet sent on a socket that is bound to an interface goes out
that interface
* A broadcast packet sent on an unbound socket follows the route table to
select the outgoing interface
+ if an explicit route entry exists for 255.255.255.255/32, use that one
+ else use the default route
* Broadcast packets are looped back and delivered following the rules for
incoming packets (see next). This is the same behavior as for multicast
packets, except that it cannot be disabled via sockopt.
Incoming
--------
* Sockets wishing to receive broadcast packets must bind to either INADDR_ANY
(0.0.0.0) or INADDR_BROADCAST (255.255.255.255). No other socket receives
broadcast packets.
* Broadcast packets are multiplexed to all sockets matching it. This is the
same behavior as for multicast packets.
* A socket can bind to 255.255.255.255:<port> and then receive its own
broadcast packets sent to 255.255.255.255:<port>
In addition, this change implicitly fixes an issue with multicast reception. If
two sockets want to receive a given multicast stream and one is bound to ANY
while the other is bound to the multicast address, only one of them will
receive the traffic.
PiperOrigin-RevId: 272792377
This also allows the tee(2) implementation to be enabled, since dup can now be
properly supported via WriteTo.
Note that this change necessitated some minor restructoring with the
fs.FileOperations splice methods. If the *fs.File is passed through directly,
then only public API methods are accessible, which will deadlock immediately
since the locking is already done by fs.Splice. Instead, we pass through an
abstract io.Reader or io.Writer, which elide locks and use the underlying
fs.FileOperations directly.
PiperOrigin-RevId: 268805207
Fix a bug where udp.(*endpoint).Disconnect [accessible in gVisor via
epsocket.(*SocketOperations).Connect with AF_UNSPEC] would leak a port
reservation if the socket/endpoint had an ephemeral port assigned to it.
glibc's getaddrinfo uses connect with AF_UNSPEC, causing each call of
getaddrinfo to leak a port. Call getaddrinfo too many times and you run out of
ports (shows up as connect returning EAGAIN and getaddrinfo returning
EAI_NONAME "Name or service not known").
PiperOrigin-RevId: 268071160
Adds support to generate Port Unreachable messages for UDP
datagrams received on a port for which there is no valid
endpoint.
Fixes#703
PiperOrigin-RevId: 267034418
This fixes the issue of not being able to bind to either a multicast or
broadcast address as well as to send and receive data from it. The way to solve
this is to treat these addresses similar to the ANY address and register their
transport endpoint ID with the global stack's demuxer rather than the NIC's.
That way there is no need to require an endpoint with that multicast or
broadcast address. The stack's demuxer is in fact the only correct one to use,
because neither broadcast- nor multicast-bound sockets care which NIC a
packet was received on (for multicast a join is still needed to receive packets
on a NIC).
I also took the liberty of refactoring udp_test.go to consolidate a lot of
duplicate code and make it easier to create repetitive tests that test the same
feature for a variety of packet and socket types. For this purpose I created a
"flowType" that represents two things: 1) the type of packet being sent or
received and 2) the type of socket used for the test. E.g., a "multicastV4in6"
flow represents a V4-mapped multicast packet run through a V6-dual socket.
This allows writing significantly simpler tests. A nice example is testTTL().
PiperOrigin-RevId: 264766909
These errors are always pointers; there's no sense in dereferencing them
in the panic call. Changed one false positive for clarity.
PiperOrigin-RevId: 263611579
13a98df rearranged some of this code in a way that broke compilation of
the netstack-only export at github.com/google/netstack because
*_state.go files are not included in that export.
This commit moves resumption logic back into *_state.go, fixing the
compilation breakage.
PiperOrigin-RevId: 263601629
Endpoint protocol goroutines were previously started as part of
loading the endpoint. This is potentially too soon, as resources used
by these goroutine may not have been loaded. Protocol goroutines may
perform meaningful work as soon as they're started (ex: incoming
connect) which can cause them to indirectly access resources that
haven't been loaded yet.
This CL defers resuming all protocol goroutines until the end of
restore.
PiperOrigin-RevId: 262409429
This doesn't currently pass on gVisor.
While I'm here, fix a bug where connecting to the v6-mapped v4 address doesn't
work in gVisor.
PiperOrigin-RevId: 260923961
This allows the user code to add a network address with a subnet prefix length.
The prefix length value is stored in the network endpoint and provided back to
the user in the ProtocolAddress type.
PiperOrigin-RevId: 259807693
The implementation is similar to linux where we track the number of bytes
consumed by the application to grow the receive buffer of a given TCP endpoint.
This ensures that the advertised window grows at a reasonable rate to accomodate
for the sender's rate and prevents large amounts of data being held in stack
buffers if the application is not actively reading or not reading fast enough.
The original paper that was used to implement the linux receive buffer auto-
tuning is available @ https://public.lanl.gov/radiant/pubs/drs/lacsi2001.pdf
NOTE: Linux does not implement DRS as defined in that paper, it's just a good
reference to understand the solution space.
Updates #230
PiperOrigin-RevId: 253168283
This is necessary for implementing network diagnostic interfaces like
/proc/net/{tcp,udp,unix} and sock_diag(7).
For pass-through endpoints such as hostinet, we obtain the socket
state from the backend. For netstack, we add explicit tracking of TCP
states.
PiperOrigin-RevId: 251934850
These wakers are uselessly allocated and passed around; nothing ever
listens for notifications on them. The code here appears to be
vestigial, so removing it and allowing a nil waker to be passed seems
appropriate.
PiperOrigin-RevId: 249879320
Change-Id: Icd209fb77cc0dd4e5c49d7a9f2adc32bf88b4b71
This requires two changes:
1) Support for more than one socket to join a given multicast group.
2) Duplicate delivery of incoming multicast packets to all sockets listening
for it.
In addition, I tweaked the code (and added a test) to disallow duplicates
IP_ADD_MEMBERSHIP calls for the same group and NIC. This is how Linux does
it.
PiperOrigin-RevId: 246437315
Change-Id: Icad8300b4a8c3f501d9b4cd283bd3beabef88b72
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes#209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
The linux packet socket can handle GSO packets, so we can segment packets to
64K instead of the MTU which is usually 1500.
Here are numbers for the nginx-1m test:
runsc: 579330.01 [Kbytes/sec] received
runsc-gso: 1794121.66 [Kbytes/sec] received
runc: 2122139.06 [Kbytes/sec] received
and for tcp_benchmark:
$ tcp_benchmark --duration 15 --ideal
[ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal
[ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal --gso 65536
[ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec
PiperOrigin-RevId: 240809103
Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
This is a preparation for GSO changes (cl/234508902).
RELNOTES[gofers]: Refactor checksum code to include length, which
it already did, but in a convoluted way. Should be a no-op.
PiperOrigin-RevId: 240460794
Change-Id: I537381bc670b5a9f5d70a87aa3eb7252e8f5ace2
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
Kevin Krakauer
Andrei Vagin
Ian Gudger
Mithun Iyer
gVisor bot
Chris Kuiper
Adin Scannell
Michael Pratt
Bhasker Hariharan
Rahat Mahmood
Tamir Duberstein
Ben Burkert