Sandbox creation uses the limits and reservations configured in the
OCI spec and set cgroup options accordinly. Then it puts both the
sandbox and gofer processes inside the cgroup.
It also allows the cgroup to be pre-configured by the caller. If the
cgroup already exists, sandbox and gofer processes will join the
cgroup but it will not modify the cgroup with spec limits.
PiperOrigin-RevId: 216538209
Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
We were previously using the sandbox process's stdio as the root container's
stdio. This makes it difficult/impossible to distinguish output application
output from sandbox output, such as panics, which are always written to stderr.
Also close the console socket when we are done with it.
PiperOrigin-RevId: 215585180
Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
Some tests check current capabilities and re-run the tests as root inside
userns if required capabibilities are missing. It was checking for
CAP_SYS_ADMIN only, CAP_SYS_CHROOT is also required now.
PiperOrigin-RevId: 214949226
Change-Id: Ic81363969fa76c04da408fae8ea7520653266312
In order to implement kill --all correctly, the Sentry needs
to track all tasks that belong to a given container. This change
introduces ContainerID to the task, that gets inherited by all
children. 'kill --all' then iterates over all tasks comparing the
ContainerID field to find all processes that need to be signalled.
PiperOrigin-RevId: 214841768
Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
This makes the flow slightly simpler (no need to call
Loader.SetRootContainer). And this is required change to tag
tasks with container ID inside the Sentry.
PiperOrigin-RevId: 214795210
Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
Capabilities.Set() adds capabilities,
but doesn't remove existing ones that might have been loaded. Fixed
the code and added tests.
PiperOrigin-RevId: 213726369
Change-Id: Id7fa6fce53abf26c29b13b9157bb4c6616986fba
Reap children more systematically in container tests. Previously,
container_test was taking ~5 mins to run because constainer.Destroy()
would timeout waiting for the sandbox process to exit. Now the test
running in less than a minute.
Also made the contract around Container and Sandbox destroy clearer.
PiperOrigin-RevId: 213527471
Change-Id: Icca84ee1212bbdcb62bdfc9cc7b71b12c6d1688d
This makes `runsc wait` behave more like waitpid()/wait4() in that:
- Once a process has run to completion, you can wait on it and get its exit
code.
- Processes not waited on will consume memory (like a zombie process)
PiperOrigin-RevId: 213358916
Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
This CL:
1) Fix `runsc wait`, it now also works after the container exits;
2) Generate correct container state in Load;
2) Make sure `Destory` cleanup everything before successfully return.
PiperOrigin-RevId: 212900107
Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
This is different from the existing -pid-file flag, which saves a host pid.
PiperOrigin-RevId: 212713968
Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
We were previously openining the platform device (i.e. /dev/kvm) inside the
platfrom constructor (i.e. kvm.New). This requires that we have RW access to
the platform device when constructing the platform.
However, now that the runsc sandbox process runs as user "nobody", it is not
able to open the platform device.
This CL changes the kvm constructor to take the platform device FD, rather than
opening the device file itself. The device file is opened outside of the
sandbox and passed to the sandbox process.
PiperOrigin-RevId: 212505804
Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
It was used before gofer was implemented and it's not
supported anymore.
BREAKING CHANGE: proxy-shared and proxy-exclusive options
are now: shared and exclusive.
PiperOrigin-RevId: 212017643
Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
Now, we can kill individual containers rather than the entire sandbox.
PiperOrigin-RevId: 211748106
Change-Id: Ic97e91db33d53782f838338c4a6d0aab7a313ead
When no capabilities are specified in exec, use the
container's capabilities to match runc's behavior.
PiperOrigin-RevId: 211735186
Change-Id: Icd372ed64410c81144eae94f432dffc9fe3a86ce
Remove GetExecutablePath (the non-internal version). This makes path handling
more consistent between exec, root, and child containers.
The new getExecutablePath now uses MountNamespace.FindInode, which is more
robust than Walking the Dirent tree ourselves.
This also removes the last use of lstat(2) in the sentry, so that can be
removed from the filters.
PiperOrigin-RevId: 211683110
Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
The specutils.ReadSpecFromFile method was fixed to always seek to the beginning
of the file before reading. This allows Files from the same FD to be read
multiple times, as we do in the boot command when the apply-caps flag is set.
Tested with --network=host.
PiperOrigin-RevId: 211570647
Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
PiperOrigin-RevId: 210995199
Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
This is used when '--overlay=true' to guarantee writes are not sent to gofer.
PiperOrigin-RevId: 210116288
Change-Id: I7616008c4c0e8d3668e07a205207f46e2144bf30
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
When "exec" command is called without the "--detach" flag, we spawn a second
"exec" command and wait for that one to start. We use the pid file passed in
--pid-file to detect when this second command has started running.
However if "exec" is called with no --pid-file flag, this system breaks down,
as we don't have a pid file to wait for.
This CL ensures that the second instance of the "exec" command always writes a
pid-file, so the wait is successful.
PiperOrigin-RevId: 206002403
Change-Id: If9f2be31eb6e831734b1b833f25054ec71ab94a6
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
Closing the control server will block until all open requests have completed.
If a control server method panics, we end up stuck because the defer'd Destroy
function will never return.
PiperOrigin-RevId: 204354676
Change-Id: I6bb1d84b31242d7c3f20d5334b1c966bd6a61dbf
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
The leave-running flag allows the container to continue running after a
checkpoint has occurred by doing an immediate restore into a new
container with the same container ID after the old container is destroyed.
Updates #80.
PiperOrigin-RevId: 202695426
Change-Id: Iac50437f5afda018dc18b24bb8ddb935983cf336
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
Now able to save the state file (checkpoint.img) at an image-path that had
previously not existed. This is important because there can only be one
checkpoint.img file per directory so this will enable users to create as many
directories as needed for proper organization.
PiperOrigin-RevId: 202360414
Change-Id: If5dd2b72e08ab52834a2b605571186d107b64526
Added a number of unimplemented flags required for using runsc's
Checkpoint and Restore with Docker. Modified the "image-path" flag to
require a directory instead of a file.
PiperOrigin-RevId: 201697486
Change-Id: I55883df2f1bbc3ec3c395e0ca160ce189e5e7eba
Restore creates a new container and uses the given image-path to load a saved
image of a previous container. Restore command is plumbed through container
and sandbox. This command does not work yet - more to come.
PiperOrigin-RevId: 201541229
Change-Id: I864a14c799ce3717d99bcdaaebc764281863d06f
It prints sandbox stacks to the log to help debug stuckness. I expect
that many more options will be added in the future.
PiperOrigin-RevId: 201405931
Change-Id: I87e560800cd5a5a7b210dc25a5661363c8c3a16e
Containers are created as processes in the sandbox. Of the many things that
don't work yet, the biggest issue is that the fsgofer is launched with its root
as the sandbox's root directory. Thus, when a container is started and wants to
read anything (including the init binary of the container), the gofer tries to
serve from sandbox's root (which basically just has pause), not the container's.
PiperOrigin-RevId: 201294560
Change-Id: I6423aa8830538959c56ae908ce067e4199d627b1
Resume checks the status of the container and unpauses the kernel
if its status is paused. Otherwise nothing happens.
Tests were added to ensure that the process is in the correct state
after various commands.
PiperOrigin-RevId: 201251234
Change-Id: Ifd11b336c33b654fea6238738f864fcf2bf81e19
A file descriptor was added as a flag to boot so a state file can restore a
container that was checkpointed.
PiperOrigin-RevId: 201068699
Change-Id: I18e96069488ffa3add468861397f3877725544aa
Fabricio Voznika
Nicolas Lacasse
Lantao Liu
Kevin Krakauer
Justine Olshan
Brielle Broder
Ian Gudger