This allows us to call kernel.FDMap.DecRef without holding mutexes
cleanly.
PiperOrigin-RevId: 211139657
Change-Id: Ie59d5210fb9282e1950e2e40323df7264a01bcec
dirent.walk() takes renameMu, but is often called with renameMu already held,
which can lead to a deadlock.
Fix this by requiring renameMu to be held for reading when dirent.walk() is
called. This causes walks and existence checks to block while a rename
operation takes place, but that is what we were already trying to enforce by
taking renameMu in walk() anyways.
PiperOrigin-RevId: 210760780
Change-Id: Id61018e6e4adbeac53b9c1b3aa24ab77f75d8a54
dirent.go:Rename() walks to the file being replaced and defers
replaced.DecRef(). After the rename, the reference is dropped, triggering a
writeout and SettAttr call to the gofer. Because of lazyOpenForWrite, the gofer
opens the replaced file BY ITS OLD NAME and calls ftruncate on it.
This CL changes Remove to drop the reference on replaced (and thus trigger
writeout) before the actual rename call.
PiperOrigin-RevId: 210756097
Change-Id: I01ea09a5ee6c2e2d464560362f09943641638e0f
Weak references save / restore involves multiple interface indirection
and cause material latency overhead when there are lots of dirents, each
containing a weak reference map. The nil entries in the map should also
be purged.
PiperOrigin-RevId: 210593727
Change-Id: Ied6f4c3c0726fcc53a24b983d9b3a79121b6b758
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
When revalidating a Dirent, if the inode id is the same, then we don't need to
throw away the entire Dirent. We can just update the unstable attributes in
place.
If the inode id has changed, then the remote file has been deleted or moved,
and we have no choice but to throw away the dirent we have a look up another.
In this case, we may still end up losing a mounted dirent that is a child of
the revalidated dirent. However, that seems appropriate here because the entire
mount point has been pulled out from underneath us.
Because gVisor's overlay is at the Inode level rather than the Dirent level, we
must pass the parent Inode and name along with the Inode that is being
revalidated.
PiperOrigin-RevId: 210431270
Change-Id: I705caef9c68900234972d5aac4ae3a78c61c7d42
Implements the TIOCGWINSZ and TIOCSWINSZ ioctls, which allow processes to resize
the terminal. This allows, for example, sshd to properly set the window size for
ssh sessions.
PiperOrigin-RevId: 210392504
Change-Id: I0d4789154d6d22f02509b31d71392e13ee4a50ba
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
As required by the contract in Dirent.flush().
Also inline Dirent.freeze() into Dirent.Freeze(), since it is only called from
there.
PiperOrigin-RevId: 209783626
Change-Id: Ie6de4533d93dd299ffa01dabfa257c9cc259b1f4
When an inode file state failed to load asynchronuously, we want to report
the error instead of potentially panicing in another async loading goroutine
incorrectly unblocked.
PiperOrigin-RevId: 209683977
Change-Id: I591cde97710bbe3cdc53717ee58f1d28bbda9261
Numpy needs these.
Also added the "present" directory, since the contents are the same as possible
and online.
PiperOrigin-RevId: 209451777
Change-Id: I2048de3f57bf1c57e9b5421d607ca89c2a173684
Some linux commands depend on /sys/devices/system/cpu/possible, such
as 'lscpu'.
Add 2 knobs for cpu:
/sys/devices/system/cpu/possible
/sys/devices/system/cpu/online
Both the values are '0 - Kernel.ApplicationCores()-1'.
Change-Id: Iabd8a4e559cbb630ed249686b92c22b4e7120663
PiperOrigin-RevId: 209070163
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
Now, there's a waiter for each end (master and slave) of the TTY, and each
waiter.Entry is only enqueued in one of the waiters.
PiperOrigin-RevId: 208734483
Change-Id: I06996148f123075f8dd48cde5a553e2be74c6dce
stat()-ing /proc/PID/fd/FD incremented but didn't decrement the refcount for
FD. This behavior wasn't usually noticeable, but in the above case:
- ls would never decrement the refcount of the write end of the pipe to 0.
- This caused the write end of the pipe never to close.
- wc would then hang read()-ing from the pipe.
PiperOrigin-RevId: 208728817
Change-Id: I4fca1ba5ca24e4108915a1d30b41dc63da40604d
InodeOperations.Bind now returns a Dirent which will be cached in the Dirent
tree.
When an overlay is in-use, Bind cannot return the Dirent created by the upper
filesystem because the Dirent does not know about the overlay. Instead,
overlayBind must create a new overlay-aware Inode and Dirent and return that.
This is analagous to how Lookup and overlayLookup work.
PiperOrigin-RevId: 208670710
Change-Id: I6390affbcf94c38656b4b458e248739b4853da29
Previously, an overlay would panic if either the upper or lower fs required
revalidation for a given Dirent. Now, we allow revalidation from the upper
file, but not the lower.
If a cached overlay inode does need revalidation (because the upper needs
revalidation), then the entire overlay Inode will be discarded and a new
overlay Inode will be built with a fresh copy of the upper file.
As a side effect of this change, Revalidate must take an Inode instead of a
Dirent, since an overlay needs to revalidate individual Inodes.
PiperOrigin-RevId: 208293638
Change-Id: Ic8f8d1ffdc09114721745661a09522b54420c5f1
Currently the implementation matches the behavior of moving data
between two file descriptors. However, it does not implement this
through zero-copy movement. Thus, this code is a starting point
to build the more complex implementation.
PiperOrigin-RevId: 208284483
Change-Id: Ibde79520a3d50bc26aead7ad4f128d2be31db14e
The cache policy determines whether Lookup should return a negative dirent, or
just ENOENT. This CL fixes one spot where we returned a negative dirent without
first consulting the policy.
PiperOrigin-RevId: 208280230
Change-Id: I8f963bbdb45a95a74ad0ecc1eef47eff2092d3a4
Previously, processes which used file-system Unix Domain Sockets could not be
checkpoint-ed in runsc because the sockets were saved with their inode
numbers which do not necessarily remain the same upon restore. Now,
the sockets are also saved with their paths so that the new inodes
can be determined for the sockets based on these paths after restoring.
Tests for cases with UDS use are included. Test cleanup to come.
PiperOrigin-RevId: 208268781
Change-Id: Ieaa5d5d9a64914ca105cae199fd8492710b1d7ec
Because the Drop method may be called across vCPUs, it is necessary to protect
the PCID database with a mutex to prevent concurrent modification. The PCID is
assigned prior to entersyscall, so it's safe to block.
PiperOrigin-RevId: 207992864
Change-Id: I8b36d55106981f51e30dcf03e12886330bb79d67
SACK is disabled by default and needs to be manually enabled. It not only
improves performance, but also fixes hangs downloading files from certain
websites.
PiperOrigin-RevId: 207906742
Change-Id: I4fb7277b67bfdf83ac8195f1b9c38265a0d51e8b
This CL adds a new cache-policy for gofer filesystems that uses the host page
cache, but causes dirents to be reloaded on each Walk, and does not cache
readdir results.
This policy is useful when the remote filesystem may change out from underneath
us, as any remote changes will be reflected on the next Walk.
Importantly, this cache policy is only consistent if we do not use gVisor's
internal page cache, since that page cache is tied to the Inode and may be
thrown away upon Revalidation.
This cache policy should only be used when the gofer supports donating host
FDs, since then gVisor will make use of the host kernel page cache, which will
be consistent for all open files in the gofer. In fact, a panic will be raised
if a file is opened without a donated FD.
PiperOrigin-RevId: 207752937
Change-Id: I233cb78b4695bbe00a4605ae64080a47629329b8
In other news, apparently proc.fdInfo is the last user of ramfs.File.
PiperOrigin-RevId: 207564572
Change-Id: I5a92515698cc89652b80bea9a32d309e14059869
Store the new assigned pcid in p.cache[pt].
Signed-off-by: ShiruRen <renshiru2000@gmail.com>
Change-Id: I4aee4e06559e429fb5e90cb9fe28b36139e3b4b6
PiperOrigin-RevId: 207563833
Add support for the seccomp syscall and the flag SECCOMP_FILTER_FLAG_TSYNC.
PiperOrigin-RevId: 207101507
Change-Id: I5eb8ba9d5ef71b0e683930a6429182726dc23175
When adding MultiDeviceKeys and their values into MultiDevice maps, make
sure the keys and values have not already been added. This ensures that
preexisting key/value pairs are not overridden.
PiperOrigin-RevId: 206942766
Change-Id: I9d85f38eb59ba59f0305e6614a52690608944981
Currently, there is an attempt to print FD flags, but
they are not decoded into a number, so we see something like this:
/criu # cat /proc/self/fdinfo/0
flags: {%!o(bool=000false)}
Actually, fdinfo has to contain file flags.
Change-Id: Idcbb7db908067447eb9ae6f2c3cfb861f2be1a97
PiperOrigin-RevId: 206794498
We have been unnecessarily creating too many savable types implicitly.
PiperOrigin-RevId: 206334201
Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
When copying-up files from a lower fs to an upper, we also copy the extended
attributes on the file. If there is a (nested) overlay inside the lower, some
of these extended attributes configure the lower overlay, and should not be
copied-up to the upper.
In particular, whiteout attributes in the lower fs overlay should not be
copied-up, since the upper fs may actually contain the file.
PiperOrigin-RevId: 206236010
Change-Id: Ia0454ac7b99d0e11383f732a529cb195ed364062
The current revalidation logic is very simple and does not do much
introspection of the dirent being revalidated (other than looking at the type
of file).
Fancier revalidation logic is coming soon, and we need to be able to look at
the cached and uncached attributes of a given dirent, and we need a context to
perform some of these operations.
PiperOrigin-RevId: 205307351
Change-Id: If17ea1c631d8f9489c0e05a263e23d7a8a3bf159
In the general case with an overlay, all mmap calls must go through the
overlay, because in the event of a copy-up, the overlay needs to invalidate any
previously-created mappings.
If there if no lower file, however, there will never be a copy-up, so the
overlay can delegate directly to the upper file in that case.
This also allows us to correctly mmap /dev/zero when it is in an overlay. This
file has special semantics which the overlay does not know about. In
particular, it does not implement Mappable(), which (in the general case) the
overlay uses to detect if a file is mappable or not.
PiperOrigin-RevId: 205306743
Change-Id: I92331649aa648340ef6e65411c2b42c12fa69631
Dirent.FullName takes the global renameMu, but can be called during Create,
which itself takes dirent.mu and dirent.dirMu, which is a lock-order violation:
Dirent.Create
d.dirMu.Lock
d.mu.Lock
Inode.Create
gofer.inodeOperations.Create
gofer.NewFile
Dirent.FullName
d.renameMu.RLock
We only use the FullName here for logging, and in this case we can get by with
logging only the BaseName.
A `BaseName` method was added to Dirent, which simply returns the name, taking
d.parent.mu as required.
In the Create pathway, we can't call d.BaseName() because taking d.parent.mu
after d.mu violates the lock order. But we already know the base name of the
file we just created, so that's OK.
In the Open/GetFile pathway, we are free to call d.BaseName() because the other
dirent locks are not held.
PiperOrigin-RevId: 205112278
Change-Id: Ib45c734081aecc9b225249a65fa8093eb4995f10
Per the doc, usage must be kept maximally merged. Beyond that, it is simply a
good idea to keep fragmentation in usage to a minimum.
The glibc malloc allocator allocates one page at a time, potentially causing
lots of fragmentation. However, those pages are likely to have the same number
of references, often making it possible to merge ranges.
PiperOrigin-RevId: 204960339
Change-Id: I03a050cf771c29a4f05b36eaf75b1a09c9465e14
If usageSet is heavily fragmented, findUnallocatedRange and findReclaimable
can spend excessive cycles linearly scanning the set for unallocated/free
pages.
Improve common cases by beginning the scan only at the first page that could
possibly contain an unallocated/free page. This metadata only guarantees that
there is no lower unallocated/free page, but a scan may still be required
(especially for multi-page allocations).
That said, this heuristic can still provide significant performance
improvements for certain applications.
PiperOrigin-RevId: 204841833
Change-Id: Ic41ad33bf9537ecd673a6f5852ab353bf63ea1e6
This method allows an eventfd inside the Sentry to be registered with with
the host kernel.
Update comment about memory mapping host fds via CachingInodeOperations.
PiperOrigin-RevId: 204784859
Change-Id: I55823321e2d84c17ae0f7efaabc6b55b852ae257
Otherwise required and optional can be empty or have negative length.
PiperOrigin-RevId: 204007079
Change-Id: I59e472a87a8caac11ffb9a914b8d79bf0cd70995
Multiple whitespace characters are allowed. This fixes Ubuntu's
/usr/sbin/invoke-rc.d, which has trailing whitespace after the
interpreter which we were treating as an arg.
PiperOrigin-RevId: 203802278
Change-Id: I0a6cdb0af4b139cf8abb22fa70351fe3697a5c6b
80bdf8a406 accidentally moved vdso into an
inner scope, never assigning the vdso variable passed to the Kernel and
thus skipping VDSO mappings.
Fix this and remove the ability for loadVDSO to skip VDSO mappings,
since tests that do so are gone.
PiperOrigin-RevId: 203169135
Change-Id: Ifd8cadcbaf82f959223c501edcc4d83d05327eba
The path in execve(2), interpreter script, and ELF interpreter may all
be no more than a NUL-byte. Handle each of those cases.
PiperOrigin-RevId: 203155745
Change-Id: I1c8b1b387924b23b2cf942341dfc76c9003da959
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
CheckIORange is analagous to Linux's access_ok() method, which is checked when
copying in IOVecs in both lib/iov_iter.c:import_single_range() and
lib/iov_iter.c:import_iovec() => fs/read_write.c:rw_copy_check_uvector().
gVisor copies in IOVecs via Task.SingleIOSequence() and Task.CopyInIovecs().
We were checking the address range bounds, but not whether the address is
valid. To conform with linux, we should also check that the address is valid.
For usual preadv/pwritev syscalls, the effect of this change is not noticeable,
since we find out that the address is invalid before the syscall completes.
For vectorized async-IO operations, however, this change is necessary because
Linux returns EFAULT when the operation is submitted, but before it executes.
Thus, we must validate the iovecs when copying them in.
PiperOrigin-RevId: 202370092
Change-Id: I8759a63ccf7e6b90d90d30f78ab8935a0fcf4936
If the child stubs are killed by any unmaskable signal (e.g. SIGKILL), then
the parent process will similarly be killed, resulting in the death of all
other stubs.
The effect of this is that if the OOM killer selects and kills a stub, the
effect is the same as though the OOM killer selected and killed the sentry.
PiperOrigin-RevId: 202219984
Change-Id: I0b638ce7e59e0a0f4d5cde12a7d05242673049d7
IsChrooted still has the opportunity to race with another thread
entering the FSContext into a chroot, but that is unchanged (and
fine, AFAIK).
PiperOrigin-RevId: 202029117
Change-Id: I38bce763b3a7715fa6ae98aa200a19d51a0235f1
The interfaces and their addresses are already available via
the stack Intefaces and InterfaceAddrs.
Also add some tests as we had no tests around SIOCGIFCONF. I also added the socket_netgofer lifecycle for IOCTL tests.
PiperOrigin-RevId: 201744863
Change-Id: Ie0a285a2a2f859fa0cafada13201d5941b95499a
The shutdown behavior where we return EAGAIN for sockets
which are non-blocking is only correct for packet based sockets.
SOCK_STREAM sockets should return EOF.
PiperOrigin-RevId: 201703055
Change-Id: I20b25ceca7286c37766936475855959706fc5397
SendExternalSignal is no longer called before CreateProcess, so it can
enforce this simplified precondition.
StartForwarding, and after Kernel.Start.
PiperOrigin-RevId: 201591170
Change-Id: Ib7022ef7895612d7d82a00942ab59fa433c4d6e9
SIGUSR2 was being masked out to be used as a way to dump sentry
stacks. This could cause compatibility problems in cases anyone
uses SIGUSR2 to communicate with the container init process.
PiperOrigin-RevId: 201575374
Change-Id: I312246e828f38ad059139bb45b8addc2ed055d74
FIOASYNC and friends are used to send signals when a file is ready for IO.
This may or may not be needed by Nginx. While Nginx does use it, it is unclear
if the code that uses it has any effect.
PiperOrigin-RevId: 201550828
Change-Id: I7ba05a7db4eb2dfffde11e9bd9a35b65b98d7f50
Almost all of the hundreds of pending signal queues are empty upon save.
PiperOrigin-RevId: 201380318
Change-Id: I40747072435299de681d646e0862efac0637e172
After shutdown(SHUT_RD) calls to recv /w MSG_DONTWAIT or with
O_NONBLOCK should result in a EAGAIN and not 0. Blocking sockets
should return 0 as they would have otherwise blocked indefinitely.
PiperOrigin-RevId: 201271123
Change-Id: If589b69c17fa5b9ff05bcf9e44024da9588c8876
Instead, CPUs will be created dynamically. We also allow a relatively
efficient mechanism for stealing and notifying when a vCPU becomes
available via unlock.
Since the number of vCPUs is no longer fixed at machine creation time,
we make the dirtySet packing more efficient. This has the pleasant side
effect of cutting out the unsafe address space code.
PiperOrigin-RevId: 201266691
Change-Id: I275c73525a4f38e3714b9ac0fd88731c26adfe66
Resume checks the status of the container and unpauses the kernel
if its status is paused. Otherwise nothing happens.
Tests were added to ensure that the process is in the correct state
after various commands.
PiperOrigin-RevId: 201251234
Change-Id: Ifd11b336c33b654fea6238738f864fcf2bf81e19
Correct a data race in rpcinet where a shutdown and recvmsg can
race around shutown flags.
PiperOrigin-RevId: 201238366
Change-Id: I5eb06df4a2b4eba331eeb5de19076213081d581f
The new policy is identical to FSCACHE (which caches everything in memory), but
it also flushes writes to the backing fs agent immediately.
All gofer cache policy decisions have been moved into the cachePolicy type.
Previously they were sprinkled around the codebase.
There are many different things that we cache (page cache, negative dirents,
dirent LRU, unstable attrs, readdir results....), and I don't think we should
have individual flags to control each of these. Instead, we should have a few
high-level cache policies that are consistent and useful to users. This
refactoring makes it easy to add more such policies.
PiperOrigin-RevId: 201206937
Change-Id: I6e225c382b2e5e1b0ad4ccf8ca229873f4cd389d
Because rpcinet will emulate a blocking socket backed by an rpc based
non-blocking socket. In the event of a shutdown(SHUT_RD) followed by a
read a non-blocking socket is allowed to return an EWOULDBLOCK however
since a blocking socket knows it cannot receive anymore data it would
block indefinitely and in this situation linux returns 0. We have to
track this on the rpcinet sentry side so we can emulate that behavior
because the remote side has no way to know if the socket is actually
blocking within the sentry.
PiperOrigin-RevId: 201201618
Change-Id: I4ac3a7b74b5dae471ab97c2e7d33b83f425aedac
Add support for control messages, but at this time the only
control message that the sentry will support here is SO_TIMESTAMP.
PiperOrigin-RevId: 200922230
Change-Id: I63a852d9305255625d9df1d989bd46a66e93c446
There are circumstances under which the redpill call will not generate
the appropriate action and notification. Replace this call with an
explicit notification, which is guaranteed to transition as well as
perform the futex wake.
PiperOrigin-RevId: 200726934
Change-Id: Ie19e008a6007692dd7335a31a8b59f0af6e54aaa
Boot loader tries to stat mount to determine whether it's a file or not. This
may file if the sandbox process doesn't have access to the file. Instead, add
overlay on top of file, which is better anyway since we don't want to propagate
changes to the host.
PiperOrigin-RevId: 200411261
Change-Id: I14222410e8bc00ed037b779a1883d503843ffebb
Rpcinet already inherits socket.ReceiveTimeout; however, it's
never set on setsockopt(2). The value is currently forwarded
as an RPC and ignored as all sockets will be non-blocking
on the RPC side.
PiperOrigin-RevId: 200299260
Change-Id: I6c610ea22c808ff6420c63759dccfaeab17959dd
This is the first iteration of checkpoint that actually saves to a file.
Tests for checkpoint are included.
Ran into an issue when private unix sockets are enabled. An error message
was added for this case and the mutex state was set.
PiperOrigin-RevId: 200269470
Change-Id: I28d29a9f92c44bf73dc4a4b12ae0509ee4070e93
In order to minimize the likelihood of exit during page table
modifications, make the full set of page table functions split-safe.
This is not strictly necessary (and you may still incur splits due to
allocations from the allocator pool) but should make retries a very rare
occurance.
PiperOrigin-RevId: 200146688
Change-Id: I8fa36aa16b807beda2f0b057be60038258e8d597
hostinet/socket.go: the Sentry doesn't spawn new processes, but it doesn't hurt to protect the socket from leaking.
unet/unet.go: should be setting closing on exec. The FD is explicitly donated to children when needed.
PiperOrigin-RevId: 200135682
Change-Id: Ia8a45ced1e00a19420c8611b12e7a8ee770f89cb
SOCK_STREAM has special behavior with respect to MSG_TRUNC. Specifically,
the data isn't actually copied back out to userspace when MSG_TRUNC is
provided on a SOCK_STREAM.
According to tcp(7): "Since version 2.4, Linux supports the use of
MSG_TRUNC in the flags argument of recv(2) (and recvmsg(2)). This flag
causes the received bytes of data to be discarded, rather than passed
back in a caller-supplied buffer."
PiperOrigin-RevId: 200134860
Change-Id: I70f17a5f60ffe7794c3f0cfafd131c069202e90d
Minor refactor. line_discipline.go was home to 2 large structs (lineDiscipline
and queue), and queue is now large enough IMO to get its own file.
Also moves queue locks into the queue struct, making locking simpler.
PiperOrigin-RevId: 200080301
Change-Id: Ia75a0e9b3d9ac8d7e5a0f0099a54e1f5b8bdea34
Walking off the bottom of the sigaltstack, for example with recursive faults,
results in forced signal delivery, not resetting the stack or pushing signal
stack to whatever happens to lie below the signal stack.
PiperOrigin-RevId: 199856085
Change-Id: I0004d2523f0df35d18714de2685b3eaa147837e0
MSG_TRUNC can cause recvmsg(2) to return a value larger than
the buffer size. In this situation it's an indication that the
buffer was completely filled and that the msg was truncated.
Previously in rpcinet we were returning the buffer size but we
should actually be returning the payload length as returned by
the syscall.
PiperOrigin-RevId: 199814221
Change-Id: If09aa364219c1bf193603896fcc0dc5c55e85d21
Adds support for echo to terminals. Echoing is just copying input back out to
the user, e.g. when I type "foo" into a terminal, I expect "foo" to be echoed
back to my terminal.
Also makes the transform function part of the queue, eliminating the need to
pass them around together and the possibility of using the wrong transform for a
queue.
PiperOrigin-RevId: 199655147
Change-Id: I37c490d4fc1ee91da20ae58ba1f884a5c14fd0d8
Because of the KVM shadow page table implementation, modifications made
to guest page tables from host mode may not be syncronized correctly,
resulting in undefined behavior. This is a KVM bug: page table pages
should also be tracked for host modifications and resynced appropriately
(e.g. the guest could "DMA" into a page table page in theory).
However, since we can't rely on this being fixed everywhere, workaround
the issue by forcing page table modifications to be in guest mode. This
will generally be the case anyways, but now if an exit occurs during
modifications, we will re-enter and perform the modifications again.
PiperOrigin-RevId: 199587895
Change-Id: I83c20b4cf2a9f9fa56f59f34939601dd34538fb0
Instead of associating a single PCID with each set of page tables (which
will reach the maximum quickly), allow a dynamic pool for each vCPU.
This is the same way that Linux operates. We also split management of
PCIDs out of the page tables themselves for simplicity.
PiperOrigin-RevId: 199585631
Change-Id: I42f3486ada3cb2a26f623c65ac279b473ae63201
In order to prevent possible garbage collection and reuse of page table
pages prior to invalidation, introduce a former allocator abstraction
that can ensure entries are held during a single traversal. This also
cleans up the abstraction and splits it out of the machine itself.
PiperOrigin-RevId: 199581636
Change-Id: I2257d5d7ffd9c36f9b7ecd42f769261baeaf115c
This change will add support for ioctls that have previously
been supported by netstack.
LINE_LENGTH_IGNORE
PiperOrigin-RevId: 199544114
Change-Id: I3769202c19502c3b7d05e06ea9552acfd9255893
This change will add support for /proc/sys/net and /proc/net which will
be managed and owned by rpcinet. This will allow these inodes to be forward
as rpcs.
PiperOrigin-RevId: 199370799
Change-Id: I2c876005d98fe55dd126145163bee5a645458ce4
This is necessary to prevent races with invalidation. It is currently
possible that page tables are garbage collected while paging caches
refer to them. We must ensure that pages are held until caches can be
invalidated. This is not achieved by this goal alone, but moving locking
to outside the page tables themselves is a requisite.
PiperOrigin-RevId: 198920784
Change-Id: I66fffecd49cb14aa2e676a84a68cabfc0c8b3e9a
Previously, the vCPU FS was always correct because it relied on the
reset coming out of the switch. When that doesn't occur, for example,
using bluepill directly, the FS value can be incorrect leading to
strange corruption.
This change is necessary for a subsequent change that enforces guest
mode for page table modifications, and it may reduce test flakiness.
(The problematic path may occur in tests, but does not occur in the
actual platform.)
PiperOrigin-RevId: 198648137
Change-Id: I513910a973dd8666c9a1d18cf78990964d6a644d
This is a refactor of ring0 and ring0/pagetables that changes from
individual arguments to opts structures. This should involve no
functional changes, but sets the stage for subsequent changes.
PiperOrigin-RevId: 198627556
Change-Id: Id4460340f6a73f0c793cd879324398139cd58ae9
These were causing non-blocking related errnos to be returned to
the sentry when they were created as blocking FDs internally.
PiperOrigin-RevId: 197962932
Change-Id: I3f843535ff87ebf4cb5827e9f3d26abfb79461b0
Kernel before 2.6.16 return EINVAL, but later return ESPIPE for this case.
Also change type of "length" from Uint(uint32) to Int64.
Because C header uses type "size_t" (unsigned long) or "off_t" (long) for length.
And it makes more sense to check length < 0 with Int64 because Uint cannot be negative.
Change-Id: Ifd7fea2dcded7577a30760558d0d31f479f074c4
PiperOrigin-RevId: 197616743
Establishes a way of communicating interface flags between netstack and
epsocket. More flags can be added over time.
PiperOrigin-RevId: 197616669
Change-Id: I230448c5fb5b7d2e8d69b41a451eb4e1096a0e30
Especially in situations with small numbers of vCPUs, the existing
system resulted in excessive thrashing. Now, execution contexts
co-ordinate as smoothly as they can to share a small number of cores.
PiperOrigin-RevId: 197483323
Change-Id: I0afc0c5363ea9386994355baf3904bf5fe08c56c
In Linux, many UDS ioctls are passed through to the NIC driver. We do the same
here, passing ioctl calls to Unix sockets through to epsocket.
In Linux you can see this path at net/socket.c:sock_ioctl, which calls
sock_do_ioctl, which calls net/core/dev_ioctl.c:dev_ioctl.
SIOCGIFNAME is also added.
PiperOrigin-RevId: 197167508
Change-Id: I62c326a4792bd0a473e9c9108aafb6a6354f2b64
Capabilities for sysv sem operations were being checked against the
current task's user namespace. They should be checked against the user
namespace owning the ipc namespace for the sems instead, per
ipc/util.c:ipcperms().
PiperOrigin-RevId: 197063111
Change-Id: Iba29486b316f2e01ee331dda4e48a6ab7960d589
This should fix the socket Dirent memory leak.
fs.NewFile takes a new reference. It should hold the *only* reference.
DecRef that socket Dirent.
Before the globalDirentMap was introduced, a mis-refcounted Dirent
would be garbage collected when all references to it were gone. For
socket Dirents, this meant that they would be garbage collected when
the associated fs.Files disappeared.
After the globalDirentMap, Dirents *must* be reference-counted
correctly to be garbage collected, as Dirents remove themselves
from the global map when their refcount goes to -1 (see Dirent.destroy).
That removes the last pointer to that Dirent.
PiperOrigin-RevId: 196878973
Change-Id: Ic7afcd1de97c7101ccb13be5fc31de0fb50963f0
When doing a BidirectionalConnect we don't need to continue holding
the ConnectingEndpoint's mutex when creating the NewConnectedEndpoint
as it was held during the Connect. Additionally, we're not holding
the baseEndpoint mutex while Unregistering an event.
PiperOrigin-RevId: 196875557
Change-Id: Ied4ceed89de883121c6cba81bc62aa3a8549b1e9
Previously, inet.Stack was referenced in 2 structs in sentry/socket that can be
saved/restored. If an app is saved and restored on another machine, it may try
to use the old stack, which will have been replaced by a new stack on the new
machine.
PiperOrigin-RevId: 196733985
Change-Id: I6a8cfe73b5d7a90749734677dada635ab3389cb9
When the amount of data read is more than the amount written, sendfile would not
adjust 'in file' position and would resume from the wrong location.
Closes#33
PiperOrigin-RevId: 196731287
Change-Id: Ia219895dd765016ed9e571fd5b366963c99afb27
When file is backed by host FD, atime and mtime for the host file and the
cached attributes in the Sentry must be close together. In this case,
the call to update atime and mtime can be skipped. This is important when
host filesystem is using overlay because updating atime and mtime explicitly
forces a copy up for every file that is touched.
PiperOrigin-RevId: 196176413
Change-Id: I3933ea91637a071ba2ea9db9d8ac7cdba5dc0482
Otherwise, mounts that fail to be unmounted (EBUSY) will be removed
from the children list anyway.
At this point, this just affects /proc/pid/mounts and /proc/pid/mountinfo.
PiperOrigin-RevId: 195267588
Change-Id: I79114483d73b90f9a7d764a7d513b5b2f251182e
Detachable exec commands are handled in the client entirely and the detach option is not used anymore.
PiperOrigin-RevId: 195181272
Change-Id: I6e82a2876d2c173709c099be59670f71702e5bf0
As of Linux 4.15 (f29810335965ac1f7bcb501ee2af5f039f792416
KVM/x86: Check input paging mode when cs.l is set), KVM validates that
LMA is set along with LME.
PiperOrigin-RevId: 195047401
Change-Id: I8b43d8f758a85b1f58ccbd747dcacd4056ef3f66
Jamie Liu
Nicolas Lacasse
Ian Gudger
Zhaozhong Ni
Michael Pratt
Fabricio Voznika
Brian Geffon
Kevin Krakauer
Adin Scannell
Chenggang Qin
Justine Olshan
Brielle Broder
Neel Natu
ShiruRen
Andrei Vagin
Rahat Mahmood
Googler
Chanwit Kaewkasi
Christopher Koch
Cyrille Hemidy
Zhengyu He