Linux PTRACE_SYSEMU support on arm64 was merged to mainline from
V5.3, and the corresponding support in go also enabled recently.
Since the "syscall" package is locked down from go 1.4, so the ptrace
PTRACE_SYSEMU definition can't be added to package "syscall" on arm64.
According to the golang community, updates required by new systems or
versions should use the corresponding package in the golang.org/x/sys
repository instead(https://golang.org/pkg/syscall/).
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2f917bb2be62f990c3e158e2bb99e094ea03f751
This change is needed to be compatible with the Linux kernel.
There is no glibc wrapper for the futex system call, so it is easy to
make a mistake and call syscall(__NR_futex, FUTEX_WAKE, addr) without
the fourth argument. This works on Linux, because it wakes one waiter
even if val is nonpositive.
PiperOrigin-RevId: 286494396
Otherwise a copy happens, which triggers a data race when reading
masterInodeOperations.SimpleFileOperations.uattr, which must be accessed with a
lock held.
PiperOrigin-RevId: 286464473
When listen(2) is called on an unbound socket, the socket is
automatically bound to a random free port with the local address
set to INADDR_ANY.
PiperOrigin-RevId: 286305906
This change removes the requirement that a new routing table be provided when a
router or prefix discovery event happens so that an updated routing table may
be provided to the stack at a later time from the event.
This change is to address the use case where the netstack integrator may need to
obtain a lock before providing updated routes in response to the events above.
As an example, say we have an integrator that performs the below two operations
operations as described:
A. Normal route update:
1. Obtain integrator lock
2. Update routes in the integrator
3. Call Stack.SetRouteTable with the updated routes
3.1. Obtain Stack lock
3.2. Update routes in Stack
3.3. Release Stack lock
4. Release integrator lock
B. NDP event triggered route update:
1. Obtain Stack lock
2. Call event handler
2.1. Obtain integrator lock
2.2. Update routes in the integrator
2.3. Release integrator lock
2.4. Return updated routes to update Stack
3. Update routes in Stack
4. Release Stack lock
A deadlock may occur if a Normal route update was attemped at the same time an
NDP event triggered route update was attempted. With threads T1 and T2:
1) T1 -> A.1, A.2
2) T2 -> B.1
3) T1 -> A.3 (hangs at A.3.1 since Stack lock is taken in step 2)
4) T2 -> B.2 (hangs at B.2.1 since integrator lock is taken in step 1)
Test: Existing tests were modified to not provide or expect routing table
changes in response to Router and Prefix discovery events.
PiperOrigin-RevId: 286274712
This change makes sure that test variables are captured before running tests
in parallel, and removes unneeded buffered channel allocations. This change also
removes unnecessary timeouts.
PiperOrigin-RevId: 286255066
Several jobs were finished in this patch:
1, provide functions to get/set fpcr/fpsr/vregs
2, support lazy-fpsimd-context-switch in el1
Signed-off-by: Bin Lu <bin.lu@arm.com>
These comments provided nothing, and have been copy-pasted into all
implementations. The code is clear without them.
I considered also removing the "handle implements handler.handle" comments, but
will let those stay for now.
PiperOrigin-RevId: 285876428
Add checks for input arguments, file type, permissions, etc. that match
the Linux implementation. A call to get/setxattr that passes all the
checks will still currently return EOPNOTSUPP. Actual support will be
added in following commits.
Only allow user.* extended attributes for the time being.
PiperOrigin-RevId: 285835159
Copy up parent when binding UDS on overlayfs is supported in commit
02ab1f187c.
But the using of copyUp in overlayBind will cause sentry stuck, reason
is dead lock in renameMu.
1 [Process A] Invoke a Unix socket bind operation
renameMu is hold in fs.(*Dirent).genericCreate by process A
2 [Process B] Invoke a read syscall on /proc/task/mounts
waitng on Lock of renameMu in fs.(*MountNamespace).FindMount
3 [Process A] Continue Unix socket bind operation
wating on RLock of renameMu in fs.copyUp
Root cause is recursive reading lock of reanmeMu in bind call trace,
if there are writing lock between the two reading lock, then deadlock
occured.
Fixes#1397
After the finalizer optimize in 76039f8959
commit, clientFile needs to closed before finalizer release it.
The clientFile is not closed if it is created via
gofer.(*inodeOperations).Bind, this will cause fd leak which is hold
by gofer process.
Fixes#1396
Signed-off-by: Yong He <chenglang.hy@antfin.com>
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
There are 4 jobs were finished in this package:
1, Virtual machine initialization.
2, Bluepill implementation.
3, Move ring0.Vectors() into the address with 11-bits alignment.
4, Basic support for "SwitchToUser".
Signed-off-by: Bin Lu <bin.lu@arm.com>
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/919 from lubinszARM:pr_kvm eedea52db451bf62722759009a9f14c54a69c55f
PiperOrigin-RevId: 285501256
Fixed a bug where the interface identifier was not properly generated from an
Ethernet address.
Tests: Unittests to make sure the functions generating the EUI64 interface
identifier are correct.
PiperOrigin-RevId: 285494562
The implementation follows the linux behavior where specifying
a TCP_USER_TIMEOUT will cause the resend timer to honor the
user specified timeout rather than the default rto based timeout.
Further it alters when connections are timedout due to keepalive
failures. It does not alter the behavior of when keepalives are
sent. This is as per the linux behavior.
PiperOrigin-RevId: 285099795
The former is needed for vfs.FileDescription to implement
memmap.MappingIdentity, and the latter is needed to implement getcwd(2).
PiperOrigin-RevId: 285051855
We're missing several packages that runsc doesn't depend on. Most notable are
several tcpip link packages.
To find packages, I looked at a diff of directories on master vs go:
$ bazel build //:gopath
$ find bazel-bin/gopath/src/gvisor.dev/gvisor/ -type d > /tmp/gopath.txt
$ find . -type d > /tmp/master.txt
$ sed 's|bazel-bin/gopath/src/gvisor.dev/gvisor/||' < /tmp/gopath.txt > /tmp/gopath.trunc.txt
$ sed 's|./||' < /tmp/master.txt > /tmp/master.trunc.txt
$ vimdiff /tmp/gopath.trunc.txt /tmp/master.trunc.txt
Testing packages are still left out because :gopath can't depend on testonly
targets...
PiperOrigin-RevId: 285049029
runsc debug --ps list all processes with all threads. This option is added to
the debug command but not to the ps command, because it is going to be used for
debug purposes and we want to add any useful information without thinking about
backward compatibility.
This will help to investigate syzkaller issues.
PiperOrigin-RevId: 285013668
This change adds support to let an integrator know when it receives an NDP
Router Advertisement message with the NDP Recursive DNS Server option with at
least one DNS server's address. The stack will not maintain any state related to
the DNS servers - the integrator is expected to maintain any required state and
invalidate the servers after its valid lifetime expires, or refresh the lifetime
when a new one is received for a known DNS server.
Test: Unittest to make sure that an event is sent to the integrator when an NDP
Recursive DNS Server option is received with at least one address.
PiperOrigin-RevId: 284890502
Package strace is missing some syscalls we actually implement (e.g.,
getrandom). We also see newer syscalls sometimes (e.g., membarrier) that would
be handy to have formatted.
Let's go ahead and add all syscalls in the latest upstream release (v5.4), even
though we only intend to implement v4.4. None of them are implemented, just
included as placeholders.
PiperOrigin-RevId: 284797577
This change marks the socket as ESTABLISHED and creates the receiver and sender
the moment we send the final ACK in case of an active TCP handshake or when we
receive the final ACK for a passive TCP handshake. Before this change there was
a short window in which an ACK can be received and processed but the state on
the socket is not yet ESTABLISHED.
This can be seen in TestConnectBindToDevice which is flaky because sometimes
the socket is in SYN-SENT and not ESTABLISHED even though the other side has
already received the final ACK of the handshake.
PiperOrigin-RevId: 284277713
This change allows the netstack to do SLAAC as outlined by RFC 4862 section 5.5.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that SLAAC
will not be performed. See `stack.Options` and `stack.NDPConfigurations` for
more details.
This change reuses 1 option and introduces a new one that is required to take
advantage of SLAAC, all available under NDPConfigurations:
- HandleRAs: Whether or not NDP RAs are processes
- AutoGenGlobalAddresses: Whether or not SLAAC is performed.
Also note, this change does not deprecate SLAAC generated addresses after the
preferred lifetime. That will come in a later change (b/143713887). Currently,
only the valid lifetime is honoured.
Tests: Unittest to make sure that SLAAC generates and adds addresses only when
configured to do so. Tests also makes sure that conflicts with static addresses
do not modify the static address.
PiperOrigin-RevId: 284265317
Threadgroups already know their TTY (if they have one), which now contains the
TTY Index, and is returned in the Processes() call.
PiperOrigin-RevId: 284263850
If the socket is bound to ANY and connected to a loopback address,
getsockname() has to return the loopback address. Without this fix,
getsockname() returns ANY.
PiperOrigin-RevId: 283647781
The code in rcv.consumeSegment incorrectly transitions to
CLOSED state from LAST-ACK before the final ACK for the FIN.
Further if receiving a segment changes a socket to a closed state
then we should not invoke the sender as the socket is now closed
and sending any segments is incorrect.
PiperOrigin-RevId: 283625300
There are two potential ways of sending a TOS byte with outgoing packets:
including a control message in sendmsg, or setting the IP_TOS/IPV6_TCLASS
socket options (for IPV4 and IPV6 respectively). This change lets hostinet
support the latter.
Fixes#1188
PiperOrigin-RevId: 283550925
There are two potential ways of sending a TOS byte with outgoing packets:
including a control message in sendmsg, or setting the IP_TOS/IPV6_TCLASS
socket options (for IPV4 and IPV6 respectively). This change lets hostinet
support the former.
PiperOrigin-RevId: 283346737
This change does not introduce any new features, or modify existing ones.
This change tests handling TCP segments right away for connections that were
completed from a listening endpoint.
PiperOrigin-RevId: 282986457
This involves allowing getsockopt/setsockopt for the corresponding socket
options, as well as allowing hostinet to process control messages received from
the actual recvmsg syscall.
PiperOrigin-RevId: 282851425
This allows writable proc and devices files to be opened with O_CREAT|O_TRUNC.
This is encountered most frequently when interacting with proc or devices files
via the command line.
e.g. $ echo 8192 1048576 4194304 > /proc/sys/net/ipv4/tcp_rmem
Also adds a test to test the behavior of open(O_TRUNC), truncate, and ftruncate
on named pipes.
Fixes#1116
PiperOrigin-RevId: 282677425
For test case "TestApplicationFault",
Memory-fault in guest user level will be trapped in el0_da.
And in el0_da, we use mmio_exit to leave the KVM guest.
Signed-off-by: Bin Lu <bin.lu@arm.com>
For test case "TestApplicationSyscall",
Syscall in guest user level will be trapped in el0_svc.
And in el0_svc, we use mmio_exit to leave the KVM guest for now.
Signed-off-by: Bin Lu <bin.lu@arm.com>
Mainly 2 jobs were finished in this patch:
1, context switching for a container application:
a, R0-R30 b, pc\pstate\sp_el0 c, pagetable_el0 for container application
This job can help us to pass the following test cases:
"TestApplicationSyscall", "TestApplicationFault"
2, checking pagetable_el0 is empty
This job can help us to pass the following test case: "TestInvalidate"
Signed-off-by: Bin Lu <bin.lu@arm.com>
- Remove the Filesystem argument from DentryImpl.*Ref(); in general DentryImpls
that need the Filesystem for reference counting will probably also need it
for other interface methods that don't plumb Filesystem, so it's easier to
just store a pointer to the filesystem in the DentryImpl.
- Add a pointer to the VirtualFilesystem to Filesystem, which is needed by the
gofer client to disown dentries for cache eviction triggered by dentry
reference count changes.
- Rename FilesystemType.NewFilesystem to GetFilesystem; in some cases (e.g.
sysfs, cgroupfs) it's much cleaner for there to be only one Filesystem that
is used by all mounts, and in at least one case (devtmpfs) it's visibly
incorrect not to do so, so NewFilesystem doesn't always actually create and
return a *new* Filesystem.
- Require callers of FileDescription.Init() to increment Mount/Dentry
references. This is because the gofer client may, in the OpenAt() path, take
a reference on a dentry with 0 references, which is safe due to
synchronization that is outside the scope of this CL, and it would be safer
to still have its implementation of DentryImpl.IncRef() check for an
increment for 0 references in other cases.
- Add FileDescription.TryIncRef. This is used by the gofer client to take
references on "special file descriptions" (FDs for files such as pipes,
sockets, and devices), which use per-FD handles (fids) instead of
dentry-shared handles, for sync() and syncfs().
PiperOrigin-RevId: 282473364
This is required to test filesystems with a non-trivial implementation of
FilesystemImpl.Release(). Propagation isn't handled yet, and umount isn't yet
plumbed out to VirtualFilesystem.UmountAt(), but otherwise the implementation
of umount is believed to be correct.
- Move entering mountTable.seq writer critical sections to callers of
mountTable.{insert,remove}Seqed. This is required since umount(2) must ensure
that no new references are taken on the candidate mount after checking that
it isn't busy, which is only possible by entering a vfs.mountTable.seq writer
critical section before the check and remaining in it until after
VFS.umountRecursiveLocked() is complete. (Linux does the same thing:
fs/namespace.c:do_umount() => lock_mount_hash(),
fs/pnode.c:propagate_mount_busy(), umount_tree(), unlock_mount_hash().)
- It's not possible for dentry deletion to umount while only holding
VFS.mountMu for reading, but it's also very unappealing to hold VFS.mountMu
exclusively around e.g. gofer unlink RPCs. Introduce dentry.mu to avoid these
problems. This means that VFS.mountMu is never acquired for reading, so
change it to a sync.Mutex.
PiperOrigin-RevId: 282444343
Packets written via SOCK_RAW are guaranteed to have network headers, but not
transport headers. Check first whether there are enough bytes left in the packet
to contain a transport header before attempting to parse it.
PiperOrigin-RevId: 282363895
Signed-off-by: Bin Lu <bin.lu@arm.com>
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/891 from lubinszARM:pr_pagetable 2385de75a8662af3ab1ae289dd74dd0e5dcfaf66
PiperOrigin-RevId: 282013224
Note that the Sentry still calls Truncate() on the file before calling Open.
A new p9 version check was added to ensure that the p9 server can handle the
the OpenTruncate flag. If not, then the flag is stripped before sending.
PiperOrigin-RevId: 281609112
As we move to CLOSE state from LAST-ACK or TIME-WAIT,
ensure that we re-match all in-flight segments to any
listening endpoint.
Also fix LISTEN state handling of any ACK segments as per RFC793.
Fixes#1153
PiperOrigin-RevId: 280703556
Aside from the performance hit, there is no guarantee that p9.ClientFile's
finalizer runs before the associated p9.Client is closed.
PiperOrigin-RevId: 280702509
Sniffer assumed that outgoing packets have transport headers, but
users can write packets via SOCK_RAW with arbitrary transport headers that
netstack doesn't know about. We now explicitly check for the presence of network
and transport headers before assuming they exist.
PiperOrigin-RevId: 280594395
It was possible to panic the sentry by opening a cache revalidating folder with
O_TRUNC|O_CREAT.
Avoids breaking php tests.
PiperOrigin-RevId: 280533213
Initialize the VDSO "os" and "arch" fields explicitly,
or the VDSO load process would failed on arm64 platform.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: Ic6768df88e43cd7c7956eb630511672ae11ac52f
newfstatat() syscall is not supported on arm64, so we resort
to use the fstatat() syscall.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: Iea95550ea53bcf85c01f7b3b95da70ad0952177d
This patch also include a minor change to replace syscall.Dup2
with syscall.Dup3 which was missed in a previous commit(ref a25a976).
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I00beb9cc492e44c762ebaa3750201c63c1f7c2f3
This change drops TCP packets with a non-unicast IP address as the source or
destination address as TCP is meant for communication between two endpoints.
Test: Make sure that if the source or destination address contains a non-unicast
address, no TCP packet is sent in response and the packet is dropped.
PiperOrigin-RevId: 280073731
This change allows the netstack to do NDP's Prefix Discovery as outlined by
RFC 4861 section 6.3.4. If configured to do so, when a new on-link prefix is
discovered, the routing table will be updated with a device route through
the nic the RA arrived at. Likewise, when such a prefix gets invalidated, the
device route will be removed.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that Prefix Discovery
will not be performed. See `stack.Options` and `stack.NDPConfigurations` for
more details.
This change reuses 1 option and introduces a new one that is required to take
advantage of Prefix Discovery, all available under NDPConfigurations:
- HandleRAs: Whether or not NDP RAs are processes
- DiscoverOnLinkPrefixes: Whether or not Prefix Discovery is performed (new)
Another note: for a NIC to process Prefix Information options (in Router
Advertisements), it must not be a router itself. Currently the netstack does not
have per-interface routing configuration; the routing/forwarding configuration
is controlled stack-wide. Therefore, if the stack is configured to enable
forwarding/routing, no router Advertisements (and by extension the Prefix
Information options) will be processed.
Tests: Unittest to make sure that Prefix Discovery and updates to the routing
table only occur if explicitly configured to do so. Unittest to make sure at
max stack.MaxDiscoveredOnLinkPrefixes discovered on-link prefixes are
remembered.
PiperOrigin-RevId: 280049278
* Basic tests for the SO_REUSEADDR and SO_REUSEPORT options.
* SO_REUSEADDR functional tests for TCP and UDP.
* SO_REUSEADDR and SO_REUSEPORT interaction tests for UDP.
* Stubbed support for UDP getsockopt(SO_REUSEADDR).
PiperOrigin-RevId: 280049265
This change adds explicit support for honoring the 2MSL timeout
for sockets in TIME_WAIT state. It also adds support for the
TCP_LINGER2 option that allows modification of the FIN_WAIT2
state timeout duration for a given socket.
It also adds an option to modify the Stack wide TIME_WAIT timeout
but this is only for testing. On Linux this is fixed at 60s.
Further, we also now correctly process RST's in CLOSE_WAIT and
close the socket similar to linux without moving it to error
state.
We also now handle SYN in ESTABLISHED state as per
RFC5961#section-4.1. Earlier we would just drop these SYNs.
Which can result in some tests that pass on linux to fail on
gVisor.
Netstack now honors TIME_WAIT correctly as well as handles the
following cases correctly.
- TCP RSTs in TIME_WAIT are ignored.
- A duplicate TCP FIN during TIME_WAIT extends the TIME_WAIT
and a dup ACK is sent in response to the FIN as the dup FIN
indicates potential loss of the original final ACK.
- An out of order segment during TIME_WAIT generates a dup ACK.
- A new SYN w/ a sequence number > the highest sequence number
in the previous connection closes the TIME_WAIT early and
opens a new connection.
Further to make the SYN case work correctly the ISN (Initial
Sequence Number) generation for Netstack has been updated to
be as per RFC. Its not a pure random number anymore and follows
the recommendation in https://tools.ietf.org/html/rfc6528#page-3.
The current hash used is not a cryptographically secure hash
function. A separate change will update the hash function used
to Siphash similar to what is used in Linux.
PiperOrigin-RevId: 279106406
This is required to implement O_TRUNC correctly on filesystems backed by
gofers.
9P2000.L: "lopen prepares fid for file I/O. flags contains Linux open(2) flags
bits, e.g. O_RDONLY, O_RDWR, O_WRONLY."
open(2): "The argument flags must include one of the following access modes:
O_RDONLY, O_WRONLY, or O_RDWR. ... In addition, zero or more file creation
flags and file status flags can be bitwise-or'd in flags."
The reference 9P2000.L implementation also appears to expect arbitrary flags,
not just access modes, in Tlopen.flags:
https://github.com/chaos/diod/blob/master/diod/ops.c#L703
PiperOrigin-RevId: 278972683
This change allows the netstack to do NDP's Router Discovery as outlined by
RFC 4861 section 6.3.4.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that Router Discovery
will not be performed. See `stack.Options` and `stack.NDPConfigurations` for
more details.
This change introduces 2 options required to take advantage of Router Discovery,
all available under NDPConfigurations:
- HandleRAs: Whether or not NDP RAs are processes
- DiscoverDefaultRouters: Whether or not Router Discovery is performed
Another note: for a NIC to process Router Advertisements, it must not be a
router itself. Currently the netstack does not have per-interface routing
configuration; the routing/forwarding configuration is controlled stack-wide.
Therefore, if the stack is configured to enable forwarding/routing, no Router
Advertisements will be processed.
Tests: Unittest to make sure that Router Discovery and updates to the routing
table only occur if explicitly configured to do so. Unittest to make sure at
max stack.MaxDiscoveredDefaultRouters discovered default routers are remembered.
PiperOrigin-RevId: 278965143
This change better follows what is outlined in RFC 793 section 3.4 figure 12
where a listening socket should not accept a SYN-ACK segment in response to a
(potentially) old SYN segment.
Tests: Test that checks the TCP RST segment sent in response to a TCP SYN-ACK
segment received on a listening TCP endpoint.
PiperOrigin-RevId: 278893114
This change validates incoming NDP Router Advertisements as per RFC 4861 section
6.1.2. It also includes the skeleton to handle Router Advertiements that arrive
on some NIC.
Tests: Unittest to make sure only valid NDP Router Advertisements are received/
not dropped.
PiperOrigin-RevId: 278891972
NETLINK_KOBJECT_UEVENT sockets send udev-style messages for device events.
gVisor doesn't have any device events, so our sockets don't need to do anything
once created.
systemd's device manager needs to be able to create one of these sockets. It
also wants to install a BPF filter on the socket. Since we'll never send any
messages, the filter would never be invoked, thus we just fake it out.
Fixes#1117
Updates #1119
PiperOrigin-RevId: 278405893
Since we only supporting sending messages from the kernel, the peer is always
the kernel, simplifying handling.
There are currently no known users of SO_PASSCRED that would actually receive
messages from gVisor, but adding full support is barely more work than stubbing
out fake support.
Updates #1117Fixes#1119
PiperOrigin-RevId: 277981465
The watchdog currently can find stuck tasks, but has no way to tell if the
sandbox is stuck before the application starts executing.
This CL adds a startup timeout and action to the watchdog. If Start() is not
called before the given timeout (if non-zero), then the watchdog will take the
action.
PiperOrigin-RevId: 277970577
When VectorisedViews were passed up the stack from packet_dispatchers, we were
passing a sub-slice of the dispatcher's views fields. The dispatchers then
immediately set those views to nil.
This wasn't caught before because every implementer copied the data in these
views before returning.
PiperOrigin-RevId: 277615351
On Arm platform, "setMemoryRegion" has extra permission checks.
In virt/kvm/arm/mmu.c: kvm_arch_prepare_memory_region()
....
if (writable && !(vma->vm_flags & VM_WRITE)) {
ret = -EPERM;
break;
}
....
So, for Arm platform, the "flags" for kvm_memory_region is required.
And on x86 platform, the "flags" can be always set as '0'.
Signed-off-by: Bin Lu <bin.lu@arm.com>
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/810 from lubinszARM:pr_setregion 8c99b19cfb0c859c6630a1cfff951db65fcf87ac
PiperOrigin-RevId: 277602603
In the future this will replace DanglingEndpoints. DanglingEndpoints must be
kept for now due to issues with save/restore.
This is arguably a cleaner design and allows the stack to know which transport
endpoints might still be using its link endpoints.
Updates #837
PiperOrigin-RevId: 277386633
When execveat is called on an interpreter script, the symlink count for
resolving the script path should be separate from the count for resolving the
the corresponding interpreter. An ELOOP error should not occur if we do not hit
the symlink limit along any individual path, even if the total number of
symlinks encountered exceeds the limit.
Closes#574
PiperOrigin-RevId: 277358474
This change helps support iterating over an NDP options buffer so that
implementations can handle all the NDP options present in an NDP packet.
Note, this change does not yet actually handle these options, it just provides
the tools to do so (in preparation for NDP's Prefix, Parameter, and a complete
implementation of Neighbor Discovery).
Tests: Unittests to make sure we can iterate over a valid NDP options buffer
that may contain multiple options. Also tests to check an iterator before
using it to see if the NDP options buffer is malformed.
PiperOrigin-RevId: 277312487
When an interpreter script is opened with O_CLOEXEC and the resulting fd is
passed into execveat, an ENOENT error should occur (the script would otherwise
be inaccessible to the interpreter). This matches the actual behavior of
Linux's execveat.
PiperOrigin-RevId: 277306680
This change supports using a user supplied TCP MSS for new active TCP
connections. Note, the user supplied MSS must be less than or equal to the
maximum possible MSS for a TCP connection's route. If it is greater than the
maximum possible MSS, the maximum possible MSS will be used as the connection's
MSS instead.
This change does not use this user supplied MSS for connections accepted from
listening sockets - that will come in a later change.
Test: Test that outgoing TCP SYN segments contain a TCP MSS option with the user
supplied MSS if it is not greater than the maximum possible MSS for the route.
PiperOrigin-RevId: 277185125
Since the syscall.Stat_t.Nlink is defined as different types on
amd64 and arm64(uint64 and uint32 respectively), we need to cast
them to a unified uint64 type in gVisor code.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I7542b99b195c708f3fc49b1cbe6adebdd2f6e96b
This change simplifies the function signatures of functions related to loading
executables, such as LoadTaskImage, Load, loadBinary.
PiperOrigin-RevId: 276821187
This change validates the ICMPv6 checksum field before further processing an
ICMPv6 packet.
Tests: Unittests to make sure that only ICMPv6 packets with a valid checksum
are accepted/processed. Existing tests using checker.ICMPv6 now also check the
ICMPv6 checksum field.
PiperOrigin-RevId: 276779148
This change is in preparation for NDP Prefix Discovery and SLAAC where the stack
will need to handle NDP Prefix Information options.
Tests: Test that given an NDP Prefix Information option buffer, correct values
are returned by the field getters.
PiperOrigin-RevId: 276594592
The amss field in the tcpip.tcp.handshake was not used anywhere. Removed it to
not cause confusion with the amss field in the tcpip.tcp.endpoint struct, which
was documented to be used (and is actually being used) for the same purpose.
PiperOrigin-RevId: 276577088
This change makes it so that NDP work is done using the per-interface NDP
configurations instead of the stack-wide default NDP configurations to correctly
implement RFC 4861 section 6.3.2 (note here, a host is a single NIC operating
as a host device), and RFC 4862 section 5.1.
Test: Test that we can set NDP configurations on a per-interface basis without
affecting the configurations of other interfaces or the stack-wide default. Also
make sure that after the configurations are updated, the updated configurations
are used for NDP processes (e.g. Duplicate Address Detection).
PiperOrigin-RevId: 276525661
Use fd.next to store the iteration start position, which can be used to accelerate allocating new FDs.
And adding the corresponding gtest benchmark to measure performance.
@tanjianfeng
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/758 from DarcySail:master 96685ec7886dfe1a64988406831d3bc002b438cc
PiperOrigin-RevId: 276351250
This change introduces a new interface, stack.NDPDispatcher. It can be
implemented by the netstack integrator to receive NDP related events. As of this
change, only DAD related events are supported.
Tests: Existing tests were modified to use the NDPDispatcher's DAD events for
DAD tests where it needed to wait for DAD completing (failing and resolving).
PiperOrigin-RevId: 276338733
This change is in preparation for NDP Router Discovery where the stack will need
to handle NDP Router Advertisments.
Tests: Test that given an NDP Router Advertisement buffer (body of an ICMPv6
packet, correct values are returned by the field getters).
PiperOrigin-RevId: 276146817
This change makes sure that when an address which is already known by a NIC and
has kind = permanentExpired gets promoted to permanent, the new
PrimaryEndpointBehavior is respected.
PiperOrigin-RevId: 276136317
Right now, we send each tcp packet separately, we call one system
call per-packet. This patch allows to generate multiple tcp packets
and send them by sendmmsg.
The arguable part of this CL is a way how to handle multiple headers.
This CL adds the next field to the Prepandable buffer.
Nginx test results:
Server Software: nginx/1.15.9
Server Hostname: 10.138.0.2
Server Port: 8080
Document Path: /10m.txt
Document Length: 10485760 bytes
w/o gso:
Concurrency Level: 5
Time taken for tests: 5.491 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 18.21 [#/sec] (mean)
Time per request: 274.525 [ms] (mean)
Time per request: 54.905 [ms] (mean, across all concurrent requests)
Transfer rate: 186508.03 [Kbytes/sec] received
sw-gso:
Concurrency Level: 5
Time taken for tests: 3.852 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 25.96 [#/sec] (mean)
Time per request: 192.576 [ms] (mean)
Time per request: 38.515 [ms] (mean, across all concurrent requests)
Transfer rate: 265874.92 [Kbytes/sec] received
w/o gso:
$ ./tcp_benchmark --client --duration 15 --ideal
[SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec
software gso:
$ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso
[SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec
PiperOrigin-RevId: 276112677
This change adds support for optionally auto-generating an IPv6 link-local
address based on the NIC's MAC Address on NIC enable.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that a link-local
address will not be auto-generated unless the stack is explicitly configured.
See `stack.Options` for more details. Specifically, see
`stack.Options.AutoGenIPv6LinkLocal`.
Tests: Tests to make sure that the IPb6 link-local address is only
auto-generated if the stack is specifically configured to do so. Also tests to
make sure that an auto-generated address goes through the DAD process.
PiperOrigin-RevId: 276059813
This patch enabled the basic framework for arm64 guest.
Serveral jobs were finished in this patch:
1, ring0.Vectors()
2, switchToUser()
3, basic framwork for Arm64 guest.
Signed-off-by: Bin Lu <bin.lu@arm.com>
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
This change fixes several issues with the fsgofer host UDS support. Notably, it
adds support for SOCK_SEQPACKET and SOCK_DGRAM sockets [1]. It also fixes
unsafe use of unet.Socket, which could cause a panic if Socket.FD is called
when err != nil, and calls to Socket.FD with nothing to prevent the garbage
collector from destroying and closing the socket.
A set of tests is added to exercise host UDS access. This required extracting
most of the syscall test runner into a library that can be used by custom
tests.
Updates #235
Updates #1003
[1] N.B. SOCK_DGRAM sockets are likely not particularly useful, as a server can
only reply to a client that binds first. We don't allow bind, so these are
unlikely to be used.
PiperOrigin-RevId: 275558502
It is quite legal to send from the ANY address (it is required for
DHCP). I can't figure out why the broadcast address was included here,
so removing that as well.
PiperOrigin-RevId: 275541954
* Pulls common functionality (IO and locking on open) into pipe_util.go.
* Adds pipe/vfs.go, which implements a subset of vfs.FileDescriptionImpl.
A subsequent change will add support for pipes in memfs.
PiperOrigin-RevId: 275322385
NDP Neighbor Solicitations sent during Duplicate Address Detection must have an
IP hop limit of 255, as all NDP Neighbor Solicitations should have.
Test: Test that DAD messages have the IPv6 hop limit field set to 255.
PiperOrigin-RevId: 275321680
This change adds support for Duplicate Address Detection on IPv6 addresses
as defined by RFC 4862 section 5.4.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that DAD will not be
performed. See `stack.Options` and `stack.NDPConfigurations` for more details.
Tests: Tests to make sure that the DAD process properly resolves or fails.
That is, tests make sure that DAD resolves only if:
- No other node is performing DAD for the same address
- No other node owns the same address
PiperOrigin-RevId: 275189471
Standard Linux kernel versions are VERSION.PATCHLEVEL.SUBLEVEL. e.g., 4.4.0,
even when the sublevel is 0. Match this standard.
PiperOrigin-RevId: 275125715
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes#1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
When any of these flags are set, all writes will trigger a subsequent fsync
call. This behavior already existed for "write-through" mounts.
O_DIRECT is treated as an alias for O_SYNC. Better support coming soon.
PiperOrigin-RevId: 275114392
These syscalls were changed in the amd64 file around the time the arm64 PR was
sent out, so their changes got lost.
Updates #63
PiperOrigin-RevId: 275114194
- Pass context.Context to OnClose().
- Pass memmap.MMapOpts to ConfigureMMap() by pointer so that implementations
can actually mutate it as required.
PiperOrigin-RevId: 274934967
Reassembly can fail due to an invalid sequence of fragments
being received. eg. Multiple fragments with same id which
claim to be the last one by setting the more flag to 0 etc.
It's safer to just drop the reassembler and increment a metric
than to panic when reassembly fails.
PiperOrigin-RevId: 274920901
...and do not populate link address cache at dispatch. This partially
reverts 313c767b00, which caused malformed
packets (e.g. NDP Neighbor Adverts with incorrect hop limit values) to
populate the address cache. In particular, this masked a bug that was
introduced to the Neighbor Advert generation code in
7c1587e340.
PiperOrigin-RevId: 274865182
Netstack has its own stats, we use this to fill /proc/net/snmp.
Note that some metrics are not recorded in Netstack, which will be shown
as 0 in the proc file.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ie0089184507d16f49bc0057b4b0482094417ebe1
For hostinet, we inherit the data from host procfs. To to that, we
cache the fds for these files for later reads.
Fixes#506
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: I2f81215477455b9c59acf67e33f5b9af28ee0165
This proc file reports routing information to applications inside the
container.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: I498e47f8c4c185419befbb42d849d0b099ec71f3
This proc file contains statistics according to [1].
[1] https://tools.ietf.org/html/rfc2013
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: I9662132085edd8a7783d356ce4237d7ac0800d94
This allows for peeking at the length of the next message on a netlink socket
without pulling it off the socket's buffer/queue, allowing tools like 'ip' to
work.
This CL also fixes an issue where dump_done_errno was not included in the
NLMSG_DONE messages payload.
Issue #769
PiperOrigin-RevId: 274068637
Strengthen the header.IPv4.IsValid check to correctly check
for IHL/TotalLength fields. Also add a check to make sure
fragmentOffsets + size of the fragment do not cause a wrap
around for the end of the fragment.
PiperOrigin-RevId: 274049313
The signalfd descriptors otherwise always show as available. This can lead
programs to spin, assuming they are looking to see what signals are pending.
Updates #139
PiperOrigin-RevId: 274017890
Also ensure that all flipcall transport errors not returned by p9 (converted to
EIO by the client, or dropped on the floor by channel server goroutines) are
logged.
PiperOrigin-RevId: 272963663
The behavior for sending and receiving local broadcast (255.255.255.255)
traffic is as follows:
Outgoing
--------
* A broadcast packet sent on a socket that is bound to an interface goes out
that interface
* A broadcast packet sent on an unbound socket follows the route table to
select the outgoing interface
+ if an explicit route entry exists for 255.255.255.255/32, use that one
+ else use the default route
* Broadcast packets are looped back and delivered following the rules for
incoming packets (see next). This is the same behavior as for multicast
packets, except that it cannot be disabled via sockopt.
Incoming
--------
* Sockets wishing to receive broadcast packets must bind to either INADDR_ANY
(0.0.0.0) or INADDR_BROADCAST (255.255.255.255). No other socket receives
broadcast packets.
* Broadcast packets are multiplexed to all sockets matching it. This is the
same behavior as for multicast packets.
* A socket can bind to 255.255.255.255:<port> and then receive its own
broadcast packets sent to 255.255.255.255:<port>
In addition, this change implicitly fixes an issue with multicast reception. If
two sockets want to receive a given multicast stream and one is bound to ANY
while the other is bound to the multicast address, only one of them will
receive the traffic.
PiperOrigin-RevId: 272792377
The input file descriptor is always a regular file, so sendfile can't lose any
data if it will not be able to write them to the output file descriptor.
Reported-by: syzbot+22d22330a35fa1c02155@syzkaller.appspotmail.com
PiperOrigin-RevId: 272730357
Right now, we can find more than one process with the 1 PID in /proc.
$ for i in `seq 10`; do
> unshare -fp sleep 1000 &
> done
$ ls /proc
1 1 1 1 12 18 24 29 6 loadavg net sys version
1 1 1 1 16 20 26 32 cpuinfo meminfo self thread-self
1 1 1 1 17 21 28 36 filesystems mounts stat uptime
PiperOrigin-RevId: 272506593
gVisor does not currently implement the functionality that would result in
AT_SECURE = 1, but Linux includes AT_SECURE = 0 in the normal case, so we
should do the same.
PiperOrigin-RevId: 272311488
Kernel.cpuClockTicker increments kernel.cpuClock, which tasks use as a clock to
track their CPU usage. This improves latency in the syscall path by avoid
expensive monotonic clock calls on every syscall entry/exit.
However, this timer fires every 10ms. Thus, when all tasks are idle (i.e.,
blocked or stopped), this forces a sentry wakeup every 10ms, when we may
otherwise be able to sleep until the next app-relevant event. These wakeups
cause the sentry to utilize approximately 2% CPU when the application is
otherwise idle.
Updates to clock are not strictly necessary when the app is idle, as there are
no readers of cpuClock. This commit reduces idle CPU by disabling the timer
when tasks are completely idle, and computing its effects at the next wakeup.
Rather than disabling the timer as soon as the app goes idle, we wait until the
next tick, which provides a window for short sleeps to sleep and wakeup without
doing the (relatively) expensive work of disabling and enabling the timer.
PiperOrigin-RevId: 272265822
Linux changed this behavior in 16e72e9b30986ee15f17fbb68189ca842c32af58
(v4.11). Previously, extra pages were always mapped RW. Now, those pages will
be executable if the segment specified PF_X. They still must be writeable.
PiperOrigin-RevId: 272256280
It isn't allowed to splice data from and into the same pipe.
But right now this check is broken, because we don't check that both ends are
pipes.
PiperOrigin-RevId: 272107022
Netstack always picks a random start point everytime PickEphemeralPort
is called. While this is required for UDP so that DNS requests go
out through a randomized set of ports it is not required for TCP. Infact
Linux explicitly hashes the (srcip, dstip, dstport) and a one time secret
initialized at start of the application to get a random offset. But to
ensure it doesn't start from the same point on every scan it uses a static
hint that is incremented by 2 in every call to pick ephemeral ports.
The reason for 2 is Linux seems to split the port ranges where active connects
seem to use even ones while odd ones are used by listening sockets.
This CL implements a similar strategy where we use a hash + hint to generate
the offset to start the search for a free Ephemeral port.
This ensures that we cycle through the available port space in order for
repeated connects to the same destination and significantly reduces the
chance of picking a recently released port.
PiperOrigin-RevId: 272058370
The gofer's CachingInodeOperations implementation contains an optimization for
the common open-read-close pattern when we have a host FD. In this case, the
host kernel will update the timestamp for us to a reasonably close time, so we
don't need an extra RPC to the gofer.
However, when the app explicitly sets the timestamps (via futimes or similar)
then we actually DO need to update the timestamps, because the host kernel
won't do it for us.
To fix this, a new boolean `forceSetTimestamps` was added to
CachineInodeOperations.SetMaskedAttributes. It is only set by
gofer.InodeOperations.SetTimestamps.
PiperOrigin-RevId: 272048146
Before https://golang.org/cl/173160 syscall.RawSyscall would zero out
the last three register arguments to the system call. That no longer happens.
For system calls that take more than three arguments, use RawSyscall6 to
ensure that we pass zero, not random data, for the additional arguments.
PiperOrigin-RevId: 271062527
Non-primary addresses are used for endpoints created to accept multicast and
broadcast packets, as well as "helper" endpoints (0.0.0.0) that allow sending
packets when no proper address has been assigned yet (e.g., for DHCP). These
addresses are not real addresses from a user point of view and should not be
part of the NICInfo() value. Also see b/127321246 for more info.
This switches NICInfo() to call a new NIC.PrimaryAddresses() function. To still
allow an option to get all addresses (mostly for testing) I added
Stack.GetAllAddresses() and NIC.AllAddresses().
In addition, the return value for GetMainNICAddress() was changed for the case
where the NIC has no primary address. Instead of returning an error here,
it now returns an empty AddressWithPrefix() value. The rational for this
change is that it is a valid case for a NIC to have no primary addresses.
Lastly, I refactored the code based on the new additions.
PiperOrigin-RevId: 270971764
How to reproduce:
$ echo "timeout 10 ls" > foo.sh
$ chmod +x foo.sh
$ ./foo.sh
(will hang here for 10 secs, and the output of ls does not show)
When "ls" process writes to stdout, it receives SIGTTOU signal, and
hangs there. Until "timeout" process timeouts, and kills "ls" process.
The expected result is: "ls" writes its output into tty, and terminates
immdedately, then "timeout" process receives SIGCHLD and terminates.
The reason for this failure is that we missed the check for TOSTOP (if
set, background processes will receive the SIGTTOU signal when they do
write).
We use drivers/tty/n_tty.c:n_tty_write() as a reference.
Fixes: #862
Reported-by: chris.zn <chris.zn@antfin.com>
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Signed-off-by: chenglang.hy <chenglang.hy@antfin.com>
Previously, the only safe way to use an fdbased endpoint was to leak the FD.
This change makes it possible to safely close the FD.
This is the first step towards having stoppable stacks.
Updates #837
PiperOrigin-RevId: 270346582
Previously, when we set hostname:
$ strace hostname abc
...
sethostname("abc", 3) = -1 ENAMETOOLONG (File name too long)
...
According to man 2 sethostname:
"The len argument specifies the number of bytes in name. (Thus, name
does not require a terminating null byte.)"
We wrongly use the CopyStringIn() to check terminating zero byte in
the implementation of sethostname syscall.
To fix this, we use CopyInBytes() instead.
Fixes: #861
Reported-by: chenglang.hy <chenglang.hy@antfin.com>
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
- Do not call Rread.SetPayload(flipcall packet window) in p9.channel.recv().
- Ignore EINTR from ppoll() in p9.Client.watch().
- Clean up handling of client socket FD lifetimes so that p9.Client.watch()
never ppoll()s a closed FD.
- Make p9test.Harness.Finish() call clientSocket.Shutdown() instead of
clientSocket.Close() for the same reason.
- Rework channel reuse to avoid leaking channels in the following case (suppose
we have two channels):
sendRecvChannel
len(channels) == 2 => idx = 1
inuse[1] = ch0
sendRecvChannel
len(channels) == 1 => idx = 0
inuse[0] = ch1
inuse[1] = nil
sendRecvChannel
len(channels) == 1 => idx = 0
inuse[0] = ch0
inuse[0] = nil
inuse[0] == nil => ch0 leaked
- Avoid deadlocking p9.Client.watch() by calling channelsWg.Wait() without
holding channelsMu.
- Bump p9test:client_test size to medium.
PiperOrigin-RevId: 270200314
Filter installation has been streamlined and functions renamed.
Documentation has been fixed to be standards compliant, and missing
documentation added. gofmt has also been applied to modified files.
Adresses a deadlock with the rolled back change:
b6a5b950d2
Creating a session from an orphaned process group was causing a lock to be
acquired twice by a single goroutine. This behavior is addressed, and a test
(OrphanRegression) has been added to pty.cc.
Implemented the following ioctls:
- TIOCSCTTY - set controlling TTY
- TIOCNOTTY - remove controlling tty, maybe signal some other processes
- TIOCGPGRP - get foreground process group. Also enables tcgetpgrp().
- TIOCSPGRP - set foreground process group. Also enabled tcsetpgrp().
Next steps are to actually turn terminal-generated control characters (e.g. C^c)
into signals to the proper process groups, and to send SIGTTOU and SIGTTIN when
appropriate.
PiperOrigin-RevId: 270088599
`bytealg/indexbyte` will use AVX or SSE instruction set, if possible,
which could accelerate `CopyStringIn` function by 28%.
In worst case(CPU doesn't support SSE), `bytealg/indexbyte`
will degenerate to traversal lookup. When dealing with
short strings, `bytealg/indexbyte` has the same performance level as
before.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Signed-off-by: Hang Su <darcy.sh@antfin.com>
Note that the exact semantics for these signalfds are slightly different from
Linux. These signalfds are bound to the process at creation time. Reads, polls,
etc. are all associated with signals directed at that task. In Linux, all
signalfd operations are associated with current, regardless of where the
signalfd originated.
In practice, this should not be an issue given how signalfds are used. In order
to fix this however, we will need to plumb the context through all the event
APIs. This gets complicated really quickly, because the waiter APIs are all
netstack-specific, and not generally exposed to the context. Probably not
worthwhile fixing immediately.
PiperOrigin-RevId: 269901749
enable kvm/testutil to support arm64
The Arm64 user-mode execution stat consists of:
1, X0- X30
2, PC, SP, PSTATE
3, TPIDR_EL0, used for TLS
4, V0-V31: 32 128-bit registers for floating point and simd
5, FPSR
Currently, we first try to achieve goals 1 and 2.
This patch provids basic test utils for goals 1 & 2
Signed-off-by: Bin Lu <bin.lu@arm.com>
This also allows the tee(2) implementation to be enabled, since dup can now be
properly supported via WriteTo.
Note that this change necessitated some minor restructoring with the
fs.FileOperations splice methods. If the *fs.File is passed through directly,
then only public API methods are accessible, which will deadlock immediately
since the locking is already done by fs.Splice. Instead, we pass through an
abstract io.Reader or io.Writer, which elide locks and use the underlying
fs.FileOperations directly.
PiperOrigin-RevId: 268805207
Fix a bug where udp.(*endpoint).Disconnect [accessible in gVisor via
epsocket.(*SocketOperations).Connect with AF_UNSPEC] would leak a port
reservation if the socket/endpoint had an ephemeral port assigned to it.
glibc's getaddrinfo uses connect with AF_UNSPEC, causing each call of
getaddrinfo to leak a port. Call getaddrinfo too many times and you run out of
ports (shows up as connect returning EAGAIN and getaddrinfo returning
EAI_NONAME "Name or service not known").
PiperOrigin-RevId: 268071160
This CL implements go_marshal, a code generation utility for
automatically serializing and deserializing ABI structs.
The go_marshal tool automatically generates implementations of the new
marshal interface. Unlike binary.Marshal/Unmarshal, the generated
interface implementations use no runtime reflection, and translates to
a single memcpy for most structs. See go_marshal/README.md for
details.
PiperOrigin-RevId: 268065475
The IPv6 all-nodes multicast address will be joined on NIC enable, and the
appropriate IPv6 solicited-node multicast address will be joined when IPv6
addresses are added.
Tests: Test receiving packets destined to the IPv6 link-local all-nodes
multicast address and the IPv6 solicted node address of an added IPv6 address.
PiperOrigin-RevId: 268047073
Since each Endpoint has a distinct mapping of the packet window, the Go race
detector does not recognize accesses by connected Endpoints to be related. This
means that this change isn't necessary for the Go race detector to accept
accesses of flipcall.Endpoint.Data(), but it *is* necessary for it to accept
accesses to shared variables outside the scope of flipcall that are
synchronized by flipcall.Endpoint state; see updated test for an example.
RaceReleaseMerge is needed (instead of RaceRelease) because calls to
raceBecomeInactive() from *unrelated* Endpoints can occur in any order.
(DowngradableRWMutex.RUnlock() has a similar property: calls to RUnlock() on
the same DowngradableRWMutex from different goroutines can occur in any order.
Remove the TODO asking to explain this now that this is understood.)
PiperOrigin-RevId: 267705325
There are a few cases addressed by this change
- We no longer generate a RST in response to a RST packet.
- When we receive a RST we cleanup and release all reservations immediately as
the connection is now aborted.
- An ACK received by a listening socket generates a RST when SYN cookies are not
in-use. The only reason an ACK should land at the listening socket is if we
are using SYN cookies otherwise the goroutine for the handshake in progress
should have gotten the packet and it should never have arrived at the
listening endpoint.
- Also fixes the error returned when a connection times out due to a
Keepalive timer expiration from ECONNRESET to a ETIMEDOUT.
PiperOrigin-RevId: 267238427
This also renames "subnet" to "addressRange" to avoid any more confusion with
an interface IP's subnet.
Lastly, this also removes the Stack.ContainsSubnet(..) API since it isn't used
by anyone. Plus the same information can be obtained from
Stack.NICAddressRanges().
PiperOrigin-RevId: 267229843
The simple test script has gotten out of control. Shard this script into
different pieces and attempt to impose order on overall test structure. This
change helps lay some of the foundations for future improvements.
* The runsc/test directories are moved into just test/.
* The runsc/test/testutil package is split into logical pieces.
* The scripts/ directory contains new top-level targets.
* Each test is now responsible for building targets it requires.
* The install functionality is moved into `runsc` itself for simplicity.
* The existing kokoro run_tests.sh file now just calls all (can be split).
After this change is merged, I will create multiple distinct workflows for
Kokoro, one for each of the scripts currently targeted by `run_tests.sh` today,
which should dramatically reduce the time-to-run for the Kokoro tests, and
provides a better foundation for further improvements to the infrastructure.
PiperOrigin-RevId: 267081397
Adds support to generate Port Unreachable messages for UDP
datagrams received on a port for which there is no valid
endpoint.
Fixes#703
PiperOrigin-RevId: 267034418
The blockingpoll_unsafe.go was copied to blockingpoll_noyield_unsafe.go
during merging commit 7206202bb9. If it still stay here, it would
cause build errors on non-amd64 platform.
ERROR:
pkg/tcpip/link/rawfile/BUILD:5:1:
GoCompilePkg
pkg/tcpip/link/rawfile.a
failed (Exit 1) builder failed: error executing command
bazel-out/host/bin/external/go_sdk/builder compilepkg -sdk
external/go_sdk -installsuffix linux_arm64 -src
pkg/tcpip/link/rawfile/blockingpoll_noyield_unsafe.go -src ...
(remaining 33 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
compilepkg: error running subcommand: exit status 2
pkg/tcpip/link/rawfile/blockingpoll_yield_unsafe.go:35:6:
BlockingPoll redeclared in this block
previous declaration at
pkg/tcpip/link/rawfile/blockingpoll_unsafe.go:26:78
Target //pkg/tcpip/link/rawfile:rawfile failed to build
Use --verbose_failures to see the command lines of failed build steps.
INFO: Elapsed time: 25.531s, Critical Path: 21.08s
INFO: 262 processes: 262 linux-sandbox.
FAILED: Build did NOT complete successfully
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I4e21f82984225d0aa173de456f7a7c66053a053e
Ioctl was returning just the buffer size from epsocket.endpoint
and it was not considering data from epsocket.SocketOperations
that was read from the endpoint, but not yet sent to the caller.
PiperOrigin-RevId: 266485461
This allows the stack to learn remote link addresses on incoming
packets, reducing the need to ARP to send responses.
This also reduces the number of round trips to the system clock,
since that may also prove to be performance-sensitive.
Fixes#739.
PiperOrigin-RevId: 265815816
This used to be the case, but regressed after a recent change.
Also made a few fixes around it and clean up the code a bit.
Closes#720
PiperOrigin-RevId: 265717496
This commit adds support for detecting the socket file type, connecting
to a Unix Domain Socket, and providing bidirectional communication
(without file descriptor transfer support).
Add missing state transition to LastAck, which should happen when the
endpoint has already recieved a FIN from the remote side, and is
sending its own FIN.
PiperOrigin-RevId: 265568314
This exposes L1, L2, etc. cache sizes, cache line size, etc.
Across S/R, everything except cache line size can differ from the host. This is
because cache line size is critical for correct use of CLFLUSH / CLFLUSHOPT,
but as far as I know, the other cache parameters can only affect performance,
not correctness.
AMD uses different leafs for cache information, which are not yet supported.
fail. There are no known cases of cache line size other than 64 in the fleet.
PiperOrigin-RevId: 265544786
This addresses the problem where an endpoint has its address removed but still
has outstanding references held by routes used in connected TCP/UDP sockets
which prevent the removal of the endpoint.
The fix adds a new "expired" flag to the referenced network endpoint, which is
set when an endpoint has its address removed. Incoming packets are not
delivered to an expired endpoint (unless in promiscuous mode), while sending
outgoing packets triggers an error to the caller (unless in spoofing mode).
In addition, a few helper functions were added to stack_test.go to reduce
code duplications.
PiperOrigin-RevId: 265514326
For SOCK_STREAM type unix socket, we shall return ECONNRESET if peer is
closed with data not read.
We explictly set a flag when closing one end, to differentiate from
just shutdown (where zero shall be returned).
Fixes: #735
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Previously, recvmsg() on a unix stream socket with its peer closed will
never return, with goroutine call trace like this:
...
2 in gvisor.dev/gvisor/pkg/sentry/kernel.(*Task).block
at pkg/sentry/kernel/task_block.go:124
3 in gvisor.dev/gvisor/pkg/sentry/kernel.(*Task).BlockWithDeadline
at pkg/sentry/kernel/task_block.go:69
4 in gvisor.dev/gvisor/pkg/sentry/socket/unix.(*SocketOperations).RecvMsg
at pkg/sentry/socket/unix/unix.go:612
5 in gvisor.dev/gvisor/pkg/sentry/syscalls/linux.recvFrom
at pkg/sentry/syscalls/linux/sys_socket.go:885
6 in gvisor.dev/gvisor/pkg/sentry/syscalls/linux.RecvFrom
at pkg/sentry/syscalls/linux/sys_socket.go:910
...
The issue is caused by that ErrClosedForReceive returned by
unix/transport.queue is turned into nil in
unix.(*EndpointReader).ReadToBlocks():
err.ToError()
As a result, in unix.(*SocketOperations).RecvMsg():
n == 0 and err == nil
We shall differentiate it from another case - no data to read where
ErrWouldBlock shall be returned; and return 0 immediately.
Fixes: #734
Reported-by: chenglang.hy <chenglang.hy@antfin.com>
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
This fixes the issue of not being able to bind to either a multicast or
broadcast address as well as to send and receive data from it. The way to solve
this is to treat these addresses similar to the ANY address and register their
transport endpoint ID with the global stack's demuxer rather than the NIC's.
That way there is no need to require an endpoint with that multicast or
broadcast address. The stack's demuxer is in fact the only correct one to use,
because neither broadcast- nor multicast-bound sockets care which NIC a
packet was received on (for multicast a join is still needed to receive packets
on a NIC).
I also took the liberty of refactoring udp_test.go to consolidate a lot of
duplicate code and make it easier to create repetitive tests that test the same
feature for a variety of packet and socket types. For this purpose I created a
"flowType" that represents two things: 1) the type of packet being sent or
received and 2) the type of socket used for the test. E.g., a "multicastV4in6"
flow represents a V4-mapped multicast packet run through a V6-dual socket.
This allows writing significantly simpler tests. A nice example is testTTL().
PiperOrigin-RevId: 264766909
Document limitation of no reasonable implementation for RWF_HIPRI
flag (High Priority Read/Write for block-based file systems).
PiperOrigin-RevId: 264237589
We wrongly parses output interface as gateway address.
The fix is straightforward.
Fixes#638
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ia4bab31f3c238b0278ea57ab22590fad00eaf061
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/684 from tanjianfeng:fix-638 b940e810367ad1273519bfa594f4371bdd293e83
PiperOrigin-RevId: 264211336
Migrates all (except 3) seqfile implementations to the vfs.DynamicBytesSource
interface. There should not be any change in functionality due to this migration
itself.
Please note that the following seqfile implementations have not been migrated:
- /proc/filesystems in proc/filesystems.go
- /proc/[pid]/mountinfo in proc/mounts.go
- /proc/[pid]/mounts in proc/mounts.go
This is because these depend on pending changes in /pkg/senty/vfs.
PiperOrigin-RevId: 263880719
This adds the same logic to NIC.findEndpoint that is already done in
NIC.getRef. Since this makes the two functions very similar they were combined
into one with the originals being wrappers.
PiperOrigin-RevId: 263864708
This fixes the implementation ambiguity issues when a filesystem
implementation embeds vfs.DefaultDirectoryFD to its directory FD along
with an internal common fileDescription utility.
For similar reasons also removes FileDescriptionDefaultImpl from
DynamicBytesFileDescriptionImpl.
PiperOrigin-RevId: 263795513
These errors are always pointers; there's no sense in dereferencing them
in the panic call. Changed one false positive for clarity.
PiperOrigin-RevId: 263611579
13a98df rearranged some of this code in a way that broke compilation of
the netstack-only export at github.com/google/netstack because
*_state.go files are not included in that export.
This commit moves resumption logic back into *_state.go, fixing the
compilation breakage.
PiperOrigin-RevId: 263601629
SendMsg before this change would copy all the data over into a
new slice even if the underlying socket could only accept a
small amount of data. This is really inefficient with non-blocking
sockets and under high throughput where large writes could get
ErrWouldBlock or if there was say a timeout associated with the sendmsg()
syscall.
With this change we delay copying bytes in till they are needed and only
copy what can be potentially sent/held in the socket buffer. Reducing
the need to repeatedly copy data over.
Also a minor fix to change state FIN-WAIT-1 when shutdown(..., SHUT_WR) is called
instead of when we transmit the actual FIN. Otherwise the socket could remain in
CONNECTED state even though the user has called shutdown() on the socket.
Updates #627
PiperOrigin-RevId: 263430505
Similar to the EPIPE case, we can return the number of bytes written before
ENOSPC was encountered. If the app tries to write more, we can return ENOSPC on
the next write.
PiperOrigin-RevId: 263041648
Now if a process sends an unsupported netlink requests,
an error is returned from the send system call.
The linux kernel works differently in this case. It returns errors in the
nlmsgerr netlink message.
Reported-by: syzbot+571d99510c6f935202da@syzkaller.appspotmail.com
PiperOrigin-RevId: 262690453
This change just introduces different congestion control states and
ensures the sender.state is updated to reflect the current state
of the connection.
It is not used for any decisions yet but this is required before
algorithms like Eiffel/PRR can be implemented.
Fixes#394
PiperOrigin-RevId: 262638292
Previously we were representing socket addresses as an interface{},
which allowed any type which could be binary.Marshal()ed to be used as
a socket address. This is fine when the address is passed to userspace
via the linux ABI, but is problematic when used from within the sentry
such as by networking procfs files.
PiperOrigin-RevId: 262460640
Endpoint protocol goroutines were previously started as part of
loading the endpoint. This is potentially too soon, as resources used
by these goroutine may not have been loaded. Protocol goroutines may
perform meaningful work as soon as they're started (ex: incoming
connect) which can cause them to indirectly access resources that
haven't been loaded yet.
This CL defers resuming all protocol goroutines until the end of
restore.
PiperOrigin-RevId: 262409429
- Unexport Filesystem/Dentry/Inode.
- Support SEEK_CUR in directoryFD.Seek().
- Hold Filesystem.mu before touching directoryFD.off in
directoryFD.Seek().
- Remove deleted Dentries from their parent directory.childLists.
- Remove invalid FIXMEs.
PiperOrigin-RevId: 262400633
- This also gets rid of pipes for now because pipe does not have vfs2 specific
support yet.
- Added file path resolution logic.
- Fixes testing infrastructure.
- Does not include unit tests yet.
PiperOrigin-RevId: 262213950
This can happen because endpoint.Close() closes the accept channel first and
then drains/resets any accepted but not delivered connections. But there can be
connections that are connected but not delivered to the channel as the channel
was full. But closing the channel can cause these writes to fail with a write to
a closed channel.
The correct solution is to abort any connections in SYN-RCVD state and
drain/abort all completed connections before closing the accept channel.
PiperOrigin-RevId: 261951132
syscall.EPOLLET has been defined with different values on amd64 and
arm64(-0x80000000 on amd64, and 0x80000000 on arm64), while unix.EPOLLET
has been unified this value to 0x80000000(golang/go#5328). ref #63
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: Id97d075c4e79d86a2ea3227ffbef02d8b00ffbb8
(Don't worry, this is mostly tests.)
Implemented the following ioctls:
- TIOCSCTTY - set controlling TTY
- TIOCNOTTY - remove controlling tty, maybe signal some other processes
- TIOCGPGRP - get foreground process group. Also enables tcgetpgrp().
- TIOCSPGRP - set foreground process group. Also enabled tcsetpgrp().
Next steps are to actually turn terminal-generated control characters (e.g. C^c)
into signals to the proper process groups, and to send SIGTTOU and SIGTTIN when
appropriate.
PiperOrigin-RevId: 261387276
We can get the mount namespace from the CreateProcessArgs in all cases where we
need it. This also gets rid of kernel.Destroy method, since the only thing it
was doing was DecRefing the mounts.
Removing the need to call kernel.SetRootMountNamespace also allowed for some
more simplifications in the container fs setup code.
PiperOrigin-RevId: 261357060
This is the source of many warnings like:
AtomicRefCount 0x7f5ff84e3500 owned by "fs.Inode" garbage collected with ref count of 1 (want 0)
PiperOrigin-RevId: 261197093
Note that some of these changes affect the protocol in
backward-incompatible ways.
- Replace use of "initially-active" and "initially-inactive" with
"client" and "server" respectively for clarity.
- Fix a race condition involving Endpoint.Shutdown() by repeatedly
invoking FUTEX_WAKE until it is confirmed that no local thread is
blocked in FUTEX_WAIT.
- Drop flipcall.ControlMode.
PiperOrigin-RevId: 260981382
The checksum was not being reset before being re-calculated and sent out.
This caused the sent checksum to always be `0x0800`.
Fixes#605.
PiperOrigin-RevId: 260965059
This doesn't currently pass on gVisor.
While I'm here, fix a bug where connecting to the v6-mapped v4 address doesn't
work in gVisor.
PiperOrigin-RevId: 260923961
It gets rid of holding state of the io.Reader offset (which is anyways held by
the vfs.FileDescriptor struct. It is also odd using a io.Reader becuase we
using io.ReaderAt to interact with the device. So making a io.ReaderAt wrapper
makes more sense.
Most importantly, it gets rid of the complexity of extracting the file reader
from a regular file implementation and then using it. Now we can just use the
regular file implementation as a reader which is more intuitive.
PiperOrigin-RevId: 260846927
Adds feature to launch from an open host FD instead of a binary_path.
The FD should point to a valid executable and most likely be statically
compiled. If the executable is not statically compiled, the loader will
search along the interpreter paths, which must be able to be resolved in
the Sandbox's file system or start will fail.
PiperOrigin-RevId: 260756825
syscall.POLL is not supported on arm64, using syscall.PPOLL
to support both the x86 and arm64. refs #63
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164
PiperOrigin-RevId: 260752049
This provides the following benefits:
- We can now use pkg/fd package which does not take ownership
of the file descriptor. So it does not close the fd when garbage collected.
This reduces scope of errors from unexpected garbage collection of io.File.
- It enforces the offset parameter in every read call.
It does not affect the fd offset nor is it affected by it. Hence reducing
scope of error of using stale offsets when reading.
- We do not need to serialize the usage of any global file descriptor anymore.
So this drops the mutual exclusion req hence reducing complexity and
congestion.
PiperOrigin-RevId: 260635174
Allocate a larger memory buffer and combine multiple copies into one copy,
to reduce the number of copies from kernel memory to user memory.
Signed-off-by: Hang Su <darcy.sh@antfin.com>
This introduces two new types of Emitters:
1. MultiEmitter, which will forward events to other registered Emitters, and
2. RateLimitedEmitter, which will forward events to a wrapped Emitter, subject
to given rate limits.
The methods in the eventchannel package itself act like a multiEmitter, but is
not actually an Emitter. Now we have a DefaultEmitter, and the methods in
eventchannel simply forward calls to the DefaultEmitter.
The unimplemented syscall handler now uses a RateLimetedEmitter that wraps the
DefaultEmitter.
PiperOrigin-RevId: 260612770
This allows the user code to add a network address with a subnet prefix length.
The prefix length value is stored in the network endpoint and provided back to
the user in the ProtocolAddress type.
PiperOrigin-RevId: 259807693
The different containers in a sandbox used only one pid
namespace before. This results in that a container can see
the processes in another container in the same sandbox.
This patch use different pid namespace for different containers.
Signed-off-by: chris.zn <chris.zn@antfin.com>
This keeps all container filesystem completely separate from eachother
(including from the root container filesystem), and allows us to get rid of the
"__runsc_containers__" directory.
It also simplifies container startup/teardown as we don't have to muck around
in the root container's filesystem.
PiperOrigin-RevId: 259613346
This fixes a bug introduced in cl/251934850 that caused
connect-accept-close-connect races to result in the second connect call
failiing when it should have succeeded.
PiperOrigin-RevId: 259584525
m.available.Signal() has to be called under m.mu.RLock, otherwise it can
race with machine.Get:
m.Get | m.Put
-------------------------------------
m.mu.Lock() |
Seatching available vcpu|
| m.available.Signal()
m.available.Wait |
PiperOrigin-RevId: 259394051
Major differences from the current ("v1") sentry VFS:
- Path resolution is Filesystem-driven (FilesystemImpl methods call
vfs.ResolvingPath methods) rather than VFS-driven (fs package owns a
Dirent tree and calls fs.InodeOperations methods to populate it). This
drastically improves performance, primarily by reducing overhead from
inefficient synchronization and indirection. It also makes it possible
to implement remote filesystem protocols that translate FS system calls
into single RPCs, rather than having to make (at least) one RPC per path
component, significantly reducing the latency of remote filesystems
(especially during cold starts and for uncacheable shared filesystems).
- Mounts are correctly represented as a separate check based on
contextual state (current mount) rather than direct replacement in a
fs.Dirent tree. This makes it possible to support (non-recursive) bind
mounts and mount namespaces.
Included in this CL is fsimpl/memfs, an incomplete in-memory filesystem
that exists primarily to demonstrate intended filesystem implementation
patterns and for benchmarking:
BenchmarkVFS1TmpfsStat/1-6 3000000 497 ns/op
BenchmarkVFS1TmpfsStat/2-6 2000000 676 ns/op
BenchmarkVFS1TmpfsStat/3-6 2000000 904 ns/op
BenchmarkVFS1TmpfsStat/8-6 1000000 1944 ns/op
BenchmarkVFS1TmpfsStat/64-6 100000 14067 ns/op
BenchmarkVFS1TmpfsStat/100-6 50000 21700 ns/op
BenchmarkVFS2MemfsStat/1-6 10000000 197 ns/op
BenchmarkVFS2MemfsStat/2-6 5000000 233 ns/op
BenchmarkVFS2MemfsStat/3-6 5000000 268 ns/op
BenchmarkVFS2MemfsStat/8-6 3000000 477 ns/op
BenchmarkVFS2MemfsStat/64-6 500000 2592 ns/op
BenchmarkVFS2MemfsStat/100-6 300000 4045 ns/op
BenchmarkVFS1TmpfsMountStat/1-6 2000000 679 ns/op
BenchmarkVFS1TmpfsMountStat/2-6 2000000 912 ns/op
BenchmarkVFS1TmpfsMountStat/3-6 1000000 1113 ns/op
BenchmarkVFS1TmpfsMountStat/8-6 1000000 2118 ns/op
BenchmarkVFS1TmpfsMountStat/64-6 100000 14251 ns/op
BenchmarkVFS1TmpfsMountStat/100-6 100000 22397 ns/op
BenchmarkVFS2MemfsMountStat/1-6 5000000 317 ns/op
BenchmarkVFS2MemfsMountStat/2-6 5000000 361 ns/op
BenchmarkVFS2MemfsMountStat/3-6 5000000 387 ns/op
BenchmarkVFS2MemfsMountStat/8-6 3000000 582 ns/op
BenchmarkVFS2MemfsMountStat/64-6 500000 2699 ns/op
BenchmarkVFS2MemfsMountStat/100-6 300000 4133 ns/op
From this we can infer that, on this machine:
- Constant cost for tmpfs stat() is ~160ns in VFS2 and ~280ns in VFS1.
- Per-path-component cost is ~35ns in VFS2 and ~215ns in VFS1, a
difference of about 6x.
- The cost of crossing a mount boundary is about 80ns in VFS2
(MemfsMountStat/1 does approximately the same amount of work as
MemfsStat/2, except that it also crosses a mount boundary). This is an
inescapable cost of the separate mount lookup needed to support bind
mounts and mount namespaces.
PiperOrigin-RevId: 258853946
This proc file reports the stats of interfaces. We could use ifconfig
command to check the result.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ia7c1e637f5c76c30791ffda68ee61e861b6ef827
COPYBARA_INTEGRATE_REVIEW=https://gvisor-review.googlesource.com/c/gvisor/+/18282/
PiperOrigin-RevId: 258303936
Now we call FUTEX_WAKE with ^uintptr(0) of waiters, but in this case only one
waiter will be waked up. If we want to wake up all of them, the number of
waiters has to be set to math.MaxInt32.
PiperOrigin-RevId: 258285286
iptables also relies on IPPROTO_RAW in a way. It opens such a socket to
manipulate the kernel's tables, but it doesn't actually use any of the
functionality. Blegh.
PiperOrigin-RevId: 257903078
Adds support to set/get the TCP_MAXSEG value but does not
really change the segment sizes emitted by netstack or
alter the MSS advertised by the endpoint. This is currently
being added only to unblock iperf3 on gVisor. Plumbing
this correctly requires a bit more work which will come
in separate CLs.
PiperOrigin-RevId: 257859112
The image is of size 64Kb which supports 64 1k blocks
and 16 inodes. This is the smallest size mkfs.ext4 works with.
Added README.md documenting how this was created and included
all files on the device under assets.
PiperOrigin-RevId: 257712672
Renamed ext4 to ext since we are targeting ext(2/3/4).
Removed fs.go since we are targeting VFS2.
Added ext.go with filesystem struct.
PiperOrigin-RevId: 257689775
A userspace process (CPL=3) can access an i/o port if the bit corresponding to
the port is set to 0 in the I/O permission bitmap.
Configure the I/O permission bitmap address beyond the last valid byte in the
TSS so access to all i/o ports is blocked.
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Change-Id: I3df76980c3735491db768f7210e71703f86bb989
PiperOrigin-RevId: 257336518
The error set in the loop in createAt was being masked
by other errors declared with ":=". This allowed an
ErrResolveViaReadlink error to escape, which can cause
a sentry panic.
Added test case which repros without the fix.
PiperOrigin-RevId: 257061767
BounceToKernel will make vCPU quit from guest ring3 to guest ring0, but
vCPUWaiter is not cleared when we unlock the vCPU, when next time this vCPU
enter guest mode ring3, vCPU may enter guest mode with vCPUWaiter bit setted,
this will cause the following BounceToKernel to this vCPU hangs at
waitUntilNot.
Halt may workaroud this issue, because halt process will reset vCPU status into
vCPUUser, and notify all waiter for vCPU state change, but if there is no
exception or syscall in this period, BounceToKernel will hang at waitUntilNot.
PiperOrigin-RevId: 256299660
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire
package to itself and didn't serve much use (it was freely cast between types,
and served as more of an annoyance than providing any protection.)
Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup
operation, and 10-15 ns per concurrent lookup operation of savings.
This also fixes two tangential usage issues with the FDMap. Namely, non-atomic
use of NewFDFrom and associated calls to Remove (that are both racy and fail to
drop the reference on the underlying file.)
PiperOrigin-RevId: 256285890
Adds support level documentation for all syscalls. Removes the Undocumented
utility function to discourage usage while leaving SupportUndocumented as the
default support level for Syscall structs.
PiperOrigin-RevId: 256281927
fileOpAt holds references on the Dirents passed as arguments to the callback,
and drops refs when finished, so we don't need to DecRef those Dirents
ourselves
However, all Dirents that we get from FindInode/FindLink must be DecRef'd.
This CL cleans up the ref-counting logic, and fixes some refcount issues in the
process.
PiperOrigin-RevId: 256220882
Fix two leaks for connectionless Unix sockets:
* Double connect: Subsequent connects would leak a reference on the previously
connected endpoint.
* Close unconnected: Sockets which were not connected at the time of closure
would leak a reference on their receiver.
PiperOrigin-RevId: 256070451
These syscalls require filesystem support that gVisor does not provide, and is
not planning to implement. Their absense should not trigger an event.
PiperOrigin-RevId: 255692871
Right now, if we can't create a stub process, we will see this error:
panic: unable to activate mm: resource temporarily unavailable
It would be better to know the root cause of this "resource temporarily
unavailable".
PiperOrigin-RevId: 255656831
Haibo Xu
Jamie Liu
Kevin Krakauer
Dean Deng
Andrei Vagin
Nicolas Lacasse
gVisor bot
Ghanan Gowripalan
Michael Pratt
Bin Lu
Yong He
lubinszARM
Rahat Mahmood
Bhasker Hariharan
Ian Gudger
Fabricio Voznika
Mithun Iyer
Adin Scannell
Zach Koopmans
Ian Lewis
Ting-Yu Wang
Brad Burlage
DarcySail
Tamir Duberstein
Jianfeng Tan
Chris Kuiper
Robert Tonic
Hang Su
praveensastry
Jianfeng Tan
Ayush Ranjan
Austin Kiekintveld
Christopher Koch
chris.zn
Adrien Leravat
Kevin
Liu Hua
Neel Natu
Yong He
Ahmet Alp Balkan